Scott December 25, 2015 My dishwasher puts water in but will not wash the dishes. But when it gets to a certain time it will drain the water.
1 Answer Scott, To be able to assist we would need to have the model number of the unit. You will want to check to make sure that the motor is getting power to it when it is in the wash cycle. If there is power but not running then replace the circulation motor. Read More...
Dwayne November 12, 2015 for Model Number LFBD2409LW0B The control board lights up when the start is pushed momentarily then all lights go out . Would this possibly be a door switch or a control board issue.
1 Answer Hello Dwayne. Based on the information you provided, it sounds like the control board is bad and will need to be replaced on the unit. Read More...
Randy October 08, 2015 for Model Number LFBD2409LB0B At times my dishes aren't dry and I notice that the high temp wash and the heat/dry lights are flashing one or two minutes after starting the cycle, if I restart the cycle it seems to work fine for that wash.
1 Answer Hello Randy. Based on the information you provided, it sounds like the control board is bad and will need to be replaced on the unit. Read More...
Connie September 20, 2015 Frigidaire dishwasher model # LFBD4209LF2B door will not close. Seems the latch won't let the door close.
1 Answer Hello Connie. You need to make sure the strike is not broken. If not, you will need to replace the latch assembly A00099902. Read More...
Roseanne August 16, 2015 for Model Number fdb520rhso Dishwasher has power but will not turn on. Only button lit is heated dry button. The other buttons touched do nothing.
1 Answer Hello Roseanne, This can be the switch assembly 154774501, the control 5304512731, or the connection between the two. Read More...
1 Answer Hello Gene, If the element and the wiring harness are good the issue will have to be either the high limit thermostat 5304525221 or the electronic control board 807024501. Read More...
Wanda July 15, 2015 for Model Number PLD2855RFC1 Looking to repair part to Dishwasher looking at parts 807024601/154663005 what is the difference in the parts they both look the same but the prices are different. Please help I need my dishwasher fixed.Thanks
Rosemary June 18, 2015 for Model Number LFBD2409LMOB We have had the dishwasher a little over a year. It has never been used. Went to run the dishwasher, but it will not wash. The water comes in and pumps out, but the water does not go through the arms. Is this a control board problem? We turned the power off as suggested by Frigidaire to rest the brain, but that did not help.
1 Answer Hello Rosemary. Check and see if there is power coming to the wash motor. If there is power there, and the motor does not run, you will need to replace the motor. If there is no power there, you will need to replace the control board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Ed April 28, 2015 for Model Number LFBD2409LMOB Dish washer in continuous cycle. Fill, wash, empty. Is this the control board or some other component?
1 Answer Hello Ed. It sounds like the control board 5304512731 is bad and will need to be replaced. Read More...
Jack H. March 14, 2015 for Model Number LFBD2409LM0B My Frigidaire dishwasher has power. These 3 lights stay lit on panel: hi temp; heat dry; washing. Dishwasher does not fill or advance in the cycle. No buttons respond and I cannot cancel. It was suggested that the door switch is bad, but that doesn't seem to account for the lack of response on the button panel. Suggestions? Thanks
1 Answer Hello Jack, This sounds like you have a bad control panel 154852501. Sometimes there will be an accompanying control 5304512731 issue. Read More...