Daniel Cain March 19, 2016 for Model Number LGUS2642LE2 Hi, About a week ago, I got this SY code displayed in the freezer temp window and CE in the refrigerator window. The temps seems okay in the fridge and freezer. Light in freezer works, but not in fridge. Ice and water will not dispense. No control buttons work on the display. A tech can out and replaced the control board (5303918538), but the error code is still showing. Can you help me, or suggest what else might be the problem. Sincerely, Daniel
1 Answer Daniel, With the SY CE code then this would be a communication error between the main board and the dispenser control board. The part number for the dispenser control board is 242114904. Read More...
Daniel C March 18, 2016 for Model Number Model: LGUS2642LE2 Hi, about a week ago, I got this error code: SY display in the freezer temp window and CE display in the refrigerator window. I had the control board (5303918538) replaced, but I still get this code. The temps seemed ok in fridge and freezer. Light in freezer works but not in fridge. Ice and water will not dispense. I can unplug it for about half an hour and when powered back on, all seemed normal, but after awhile, the SY and CE code reappears.
1 Answer Daniel, The issue with this SY CE error is a communication error between the main board and dispenser board. Since the main board has been changed you will want to check the connections at the dispenser board and if these check ok then replace the dispenser board 242114904. Read More...
Stephen January 05, 2016 for Model Number FGHS2342LF7 Refrigerator is 2 yrs old. Ice cube dispenser quit working but the water dispenser is working any ideas ?
1 Answer Hello Stephen. You will need to check and see if there is power coming to the auger motor. If there is power there, and the motor does not run, it is bad. You can only test this with the door switch closed. The auger motor has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. If there is no power, then you will need to check the control board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Terry September 11, 2015 for Model Number fgus2642lf2 I heard a loud pop sound from my refrigerator, complete black nothing comes on when plugged in, what do I need ?
1 Answer Terry, You'll need to remove the front kickplate grille, and/or raise the front of the refrigerator slightly and remove the 5303918538 switch board box and check the control board inside it for damage and shorted or burn marks on the board. Read More...
Pcpcpc September 02, 2015 for Model Number FGHC2345LF5 Control Panel has Code 56 -56. Ice dispenser-Water dispenser- Refrigerator Light. Do not work. The Freezer and Refrigerator seem to be working fine. I'm thinking the Control Panel is Bad. Part # AP4565887 Help. Wife not Happy!
1 Answer Hello. If the numbers are showing Sb, this means your appliance is in the Sabbath mode. To get out of this mode you will need to press and hold the down arrow on the freezer side and the up arrow on the refrigerator side simultaneously for 5-10 seconds. If this does not work, you will need to reset your appliance. You can do this by either unplugging it or shutting the power off at your home's circuit breaker, for 15-20 minutes. Restore power and check the control panel as well as the ice dispenser and lights. If the problem is still there, replace the control board on the unit. Read More...
Walt April 05, 2015 for Model Number FGUS2642LF2 Hi, after out of town 2 weeks came home to error code 5y ce on display. The temps seemed ok in fridge and freezer. Light in freezer works but not in fridge. Ice and water will not dispense. I unplugged for 15 minutes. When powered back on all seemed normal, on display and the light in fridge worked. After are minutes display again went 5y ce and light in fridge off. Suggestions?
1 Answer Walt, The SY CE error code is a communication error which would require a new control board part number 5303918538. Read More...
Dave January 03, 2015 for Model Number LGUS2642LF1 3 year old fridge. The freezer quit cooling. Removed panel inside the freezer back, found the evaporator was iced up at the in and out tubes over top the evaporator, but not the actual evaporator coil itself. Thawed with hair drier and made sure fan was operable. Changed Thermistor and tried again. No dice. Still had cooling in fridge side,(37 degrees) but only partial cooling in freezer side. (about 38 - 46 degrees). Next tried the switching board down under refrigerator. Again, no joy. By the way, the evaporator coil is not covered with dust or anything like that. Fan also works. Compressor does run. Any ideas?
1 Answer Dave, With the temperature in the refrigerator staying about normal but the freezer not, this sounds like an issue with possibly a low refrigerant charge. If just the upper part of the coils are frosted but nothing on the lower 2/3 of the coils then this would most likely be the issue. Read More...
Ken M. December 23, 2014 for Model Number LGUS2642LF0 During the past three years the plastic covering over the ice and water control panel has become worn and bubblely. Is there a replacement for this or would it be harmful to just remove this? I would not want to risk damage to the control panel board.
1 Answer Hello Ken, First see if the plastic will peel off without removing the wording. If so, this was the protective coating put on for shipping protection from scratches and other damage. If not, replace the dispense control board 242114904. Read More...
Doug May 11, 2014 for Model Number LGUS2642F1 My refrigerator is only 3 years old but recently the ice and water dispencers will not cut off. What part do I need to correct this and is this part simple to change out?
1 Answer Hello Doug. It sounds like the module 242074223 is bad in the dispenser. Test it and see if it is staying closed. If so, replace the module. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Beverly January 19, 2014 for Model Number FGUS2642LFO The temperature shows 84 and its 29 in the refrigerator can't turn it up or down. Whats the problem
1 Answer Beverly, With the display not being able to be adjusted up or down the issue would most likely be caused by a faulty dispenser control board 242114904. You will also want to check the resistance of the thermistors as well to make sure that it is good. Read More...