Donnie August 29, 2015 for Model Number frs6lf7jw3 My ice maker makes ice but will not despence it thru the door. The water part works fine.
1 Answer Donnie, You will want to check to see if the auger motor is getting 120 vac to it. If it is but not turning then the auger motor would need to be replaced. If it is not getting power then the dispenser power board would be the issue. Read More...
Jake July 23, 2015 for Model Number GLHS68EJSB0 Hi Our Ice/Water dispenser on our GLHS68EJSB0 randomly dispenses water when you press the ice lever. It can be fine for a few days, then it'll spend a few days screwed up. Any hints on which part might be causing this? Thanks Jake
1 Answer Hello Jake. Check wiring connections and dispenser switches and if good, replace the dispenser board 241708202. Read More...
John June 26, 2015 for Model Number PLHS267ZAB6 My Ice maker stopped working I check all the solenoids they are working so I replaced the main unit model No.SA8868 and the same thing. The unit works and makes Ice as long as I put water in the tray. So the only thing not working is the water is not dispensing into the try. Thanks
1 Answer Hello John. Check for a frozen fill tube. If it is clear, you will need to replace the water valve on the unit. Read More...
Walt February 13, 2015 for Model Number Fridgidaire My tube that dispenses the water slipped out of the hole, so I took it apart reinserted it and started to put it back together (did not unplug the fridge, oops) I think I may have shorted it out. I replaced 241708309 board. Put it back together and nothing. Replaced the ribbon and the ice maker won't shut off. Replaced 241708202 board and still the ice maker won't shut off. I even unplugged the little black ice maker switch behind the 241708202 board. After spending $250 in parts I am at wits end. Any help would be appreciated.
1 Answer Walt, To properly assist you we will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Mike F January 18, 2015 for Model Number frs26lf7dsb Ice continues to dispense, when I open the door it stops I just replaced the ribbon cable.
1 Answer Mike, The most likely cause for the dispenser to continue to dump ice would be a faulty power control board on the dispenser. Read More...
Tim January 03, 2015 for Model Number 25354739304 Do you have the wiring harness that connects at top of freezer and goes to dispensor main board
1 Answer Tim, If you are referring to the wiring harness that goes from the top of the door down to the dispenser assembly, this part is not a separate part and only comes with the door. Read More...
Tim December 29, 2014 for Model Number kenmore 25354739304 I have no lights on the water/ice dispenser that work. I have checked the connections and wires at top and they look good. Should I assume it is the board?
1 Answer Hello Tim, If you can verify that 120Vac is getting to the display board 241708310, it has failed. If voltage is not getting to the display board but is getting to the dispenser power control board, the power control board 241708202 has failed. Read More...
Stephanie September 27, 2014 for Model Number Kenmore Pro 25344333604 I replaced the water actuator in my Kenmore Pro. When plugging the ribbon cable back in the control panel side, I did so upside down and the water started pouring out when I plugged in the ref rig. After unplugging the fridge and putting the ribbon the opposite and correct way, we are no longer receiving any power to the control panel. My next step is to replace the ribbon, but wondered if you ever heard of this happening. I'm just hopeful I didn't blow the control panel! Thank you!
1 Answer Stephanie, With the unit dispenser not operating and the water pouring out it does sound like the power control board for the dispenser may be faulty which would need to be replaced. Read More...
Alexandra April 19, 2014 for Model Number mytag mf12569veb2 My refrigerator (Maytag mf12569veb2) front panel does not work. It looks like it is locked. I tried to unlock the dispenser but still does not work. The weird thing is that can not change anything on the dispenser like the temperature. I can not get water or ice (it is not even making ice, don't know if it is because lights for water and ice are off). I did have water until today. That is when the light went off. When trying to get water the lock light start blinking. The lights that are on are "lock, light, door alarm and humidity control" . Not sure if it is the hv control Board, the electronic control board or maybe anything. I see you have the parts for this refrigerator but hope you can guide me to get the right one. thanks.
1 Answer Alexandra, You will want to try to unlock the control pad by pushing the lock key for 3 seconds. If you just push it once and then immediately let it go it will not come out of the lock state. If this does not work then the display board would be the cause for the issue and would need to be replaced. The part number for the control board is 67006294. Read More...
Joe January 23, 2014 for Model Number phs69egss3 Ice dispenser doesn't work. Replaced control board, no help.
1 Answer Joe, You would want to check to see if there is power going to the auger motor when you hit the dispenser switch. The light switch must be pushed in. If there is no power then check the wire harness going from the cabinet to the door for loose or broken wires. Specifically the purple wire. Also check to make sure that the dispenser lever is making contact with the switch. Read More...