Gerald February 21, 2014 for Model Number 316455400 How do I go about ordering a face plate for this part?
1 Answer Hello Gerald. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Felix February 20, 2014 for Model Number CFEF320GSA My oven element doesnt work but broil work. Can it be just the oven element?
1 Answer Hello Felix. Test the element and see if it is closed for continuity. If so, replace the board. If it is open, replace the element. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Jeremy January 27, 2014 for Model Number fef336esb I would like to know if this control board will work with this model number. Also can I verify this with serial number VF72449532? Please confirm.
1 Answer Hello Jeremy, This clock assembly 5304518660 is the one recommended for the unit you listed. Read More...
Hector December 25, 2013 My oven control panel works fine. The cheap plastic mounting brackets attached to the panel broke. Anyway I can avoid buying a new panel?
1 Answer Hello Hector. Sorry, there is no other way but to replace the board. The manufacturer does not sell just the housing. Read More...
L Nevins December 24, 2013 for Model Number FEF336ECE (Electrolux/Frigidaire Electric oven & range) Both the bake and briol functions stopped working at the same time, neither element heats up whatsoever. All of the controls still light up and seem to function properly. I verified I was getting 120V in from the outlet and that each wire is delivering 120V to each both bake and broil elements (even though they weren't getting hot). I removed bake and broil elements and applied 120V to them directly from an outlet and both got hot. Both elements also had 20 ohms when checking them for continuity. What could be the problem? Seems like a AP3956392 control board would be a good guess, but is there any way to know for certain? Afterall, the control board is delivering 120V to the elements.
1 Answer Hello L. It sounds like the board 5304518660 is bad and will need to be replaced on the unit. Read More...
Mack December 20, 2013 for Model Number tef326fbc I have a Tappan electric range. When the top burners are working, the oven won't come on.
1 Answer Hello Mack, Since the top and the bake compartment only share wiring from the terminal block, (where the power cord connects to the unit), back to the breaker, I would start at the terminal block, then to the wall outlet and back to the breaker. If there are any burned spots on the prongs that plug into the wall outlet, this is an indication of a loose receptacle and the wall outlet should be replaced. If you can sand off the burned places, the cord can still be used, but if it has heated up so there is swelling around where the prongs leave the insulated part of the plug, it should be replaced also. Read More...
Robert December 20, 2013 for Model Number Frigidaire Gallery - Unknown # Stove quit - replaced the element but seemed to not work either. I turned the oven up to 450 and it did heat enough to smell like new elements do the first time. It didn't get red though. Any advice? Thanks
1 Answer Robert, You will want to check to make sure that there is 240 vac getting to the element. Check at the control board when on bake for 240 vac from L2 to bake and if there is not 240 vac then replace the control board. Read More...
Mark November 30, 2013 for Model Number Frigidaire model FEF336ECG Frigidaire model FEF336ECG My problem is No oven Bake or Broil, both are out at the "same" time. All surface elements work, Control board has illumination, you can set temperature to turn on either bake (350) or broil (Hi) hear the relay "click" on either but still no oven elements are heating. My thought is that it's the control panel. What would be your thought?
1 Answer Hello Mark. You need to check and see if the power to the unit is 240 and all wires are good. If so, replace the board in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Jim C November 10, 2013 for Model Number Frigidaire ES 530L Oven stopped working last night..no clock, control panel not working. Mini-oven control works..What could I check? Thank you!!
1 Answer Hello Jim. Test for power to the control board. If there is power there, and the board does not work, replace the control board in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Big Lou September 19, 2013 When checking the oven and broiler on a Kenmore ceramic top which side is L1 and L2?