Jason October 23, 2023 for Model Number BGGF3045RFA Front left burner not sparking? Spark igniter looks good, looks like the others? Thought it was the spark module, bought one, but didn't fix it.
1 Answer Jason, You will want to test the ignition switch to ensure that there is continuity in the light position. This will be the most likely cause for this issue. Read More...
Cindy February 07, 2023 for Model Number 79072909015 The oven takes forever to warm up; like a half an hour or more. Is it the igniter that needs to be replaced? If so, what part number would that be?
1 Answer Cindy, it would be recommended that the burner ports are cleaned as clogged ports can cause improper ignition and heating. The ignitor would also need to be inspected to identify if it glows within 10 seconds and ignites the flame within 60 seconds. If not, the bake 316489403 or broil 5304506545 igniter would be the likely cause of failure (respective to bake or broil cycle not reaching temperature properly). Read More...
Sherri July 15, 2020 for Model Number FPGF3081KFR Hello, we lost power the other day and now my oven is showing an error code F30. I can use the stove top but can not turn on my oven?
1 Answer Sherri, the oven temperature sensor 316490000 would need to be tested for resistance using the two purple wires at the connection P29 on the main control. If the resistance is around 1100O at room temperature the failure would be in the main control 316562004. If the resistance is not around 1100O, then the sensor would need to be replaced. Read More...
Bill September 25, 2019 for Model Number 79074232310 Hello my gas range will not ignite front left burner. All other burners lite just fine. This burner is the one which has had the most use . I smell gas when turned on. I have cleaned electrode tip with a fine file and made sure assembly is clean.I am wondering switch or electrode?
1 Answer Bill, Find the switch harness connected to all the gas burner valves and disconnect the very ends of the black and red wires. [no power on] Check for continuity between the two wires when you turn the switch on. If no continuity then replace the switch harness 316580615. If you do have spark at the burner in question then see where the spark arcs to. It should arc towards the burner base. If damaged it will arc in all directions. If you have correct spark and arcs towards the burner then you might just need to clean the burner base. Also if the switch harness has continuity and you have no spark at the burner then replace the spark module. 5304508269 Read More...