Ralph November 28, 2025 for Model Number FGSS2635TFB Ice maker is stuck on crushed ice, is the solenoid out ?
1 Answer Hello Ralph, and thank you for your question. It is possible the solenoid is the cause of failure. A way to check is removing the ice bin, reaching back to the yoke under the solenoid, and lifting it up. If the yoke does not lift up and set down easily, the solenoid and yoke assembly 241675704 has failed. Read More...
Earnest August 23, 2025 for Model Number FFHS2611PFEA Little pieces of plastic come out when dispensing ice. Noticed it’s broken around the auger. Is this the correct ice bin.
1 Answer Earnest, Thanks for your question. And yes, this is the correct container assembly part# 241860803 - 241860803 Read More...
Reginald September 21, 2024 for Model Number Ffhs2622ms3 Will the complete ice tray mechanism fit my model
1 Answer Hello Reginald, thank you for contacting APP, The Ice Container Assembly part # 241860803 is correct for your model. Read More...
H Jan May 28, 2024 for Model Number FGUS2642LF2 Does the complete ice bin assembly contain the auger motor as well?
1 Answer H Jan, The part number for the auger motor for this will be 242221501 and does not come with the ice container assembly. Read More...
Ron August 29, 2023 for Model Number lfss2612tfo FRIGIDARE lfss2612tfo ice bin auger locks up and won’t provide ice out the drop. Took it out and tried Turing by hand and it would also bid with nothing in the bin. Is there apart or do I have to replace complete ice bin
1 Answer Hello Ron, the complete ice bin is part 241860803, if you chose to take it apart to check for wear or damage, be sure to take a video or pics of the parts as you remove them, they have to be reassembled in the correct order and there is no video or installation instructions on this repair. Read More...
Alice June 30, 2023 for Model Number 106 592 99990 Can someone please tell me which ice bin (part number) fits this fridge. They show several different ones but my son gave me the fridge, when mine broke down, so I don't know what it looks like. It does take the auger though. Thank you in advance.
Vonnie March 22, 2023 for Model Number Frigidaire LFSC2324VF4 The ice maker worked about 6 months then stopped. I called the manufacturer because it was still under warranty. They came out on 3 different occasions. The ice maker assembly was replaced, the power control board was also replaced. Was told I should have ice in about 24 hrs. I’ve been waiting for about 1 1/2 for my ice. Any ideas ?
1 Answer Vonnie, Check to make sure that the freezer temperature is 0-5 degrees Fahrenheit and make sure that there is water coming into the icemaker. If there is no water coming into the icemaker then it is possible that the fill tube may be frozen or the water valve is faulty. Read More...
Steve G February 05, 2023 for Model Number FFSS2614QP1A My Ice maker is making lots of ice, but it is stuck together, so much that it has broke the connection on the front cover. I have adjusted the temp up to 9 and down to 7 allowing the 24 hour time to adjust. In all of my research seems to indicate a new ice maker is in order??
1 Answer Steve G, Check to see if the ice maker is level and that it is not leaking or overfilling. The ice maker assembly is 241798231 Read More...
Les H September 12, 2022 for Model Number Ffhs2622mwe Ice jams at end of auger drum, which does not allow the auger to rotate and release ice. Motor makes a loud noice and locks up. Will replacing the container # AP4300918 fix this issue and dispense ice?
1 Answer Les, Most likely there is a broken part at the front of the ice bin and replacing the ice container would correct this issue. Read More...
Hakim April 25, 2022 for Model Number Frigidaire My Refrigerator is less than 3 years old and is producing ice. However ice cubes keep getting lodged in between the blades of the ice maker when dispensing ice and I keep having to remove the pieces from in between the blades before it will make crushed ice or even dispense large ice at times. I notices that the blades feel a little lose which is the reason I think the ice keeps getting stuck. How do I replace the blades? Do I have to purchase a whole new ice maker to fix this? I ice maker is not broken as it produces ice. The issue I'm having is keep the ice from getting trapped between the bladed and making this clicking noise. I love crushed ice and need to get this fixed as soon as possible. Thanks for your help!
1 Answer Hakim, if the model number of your appliance could be provided in a new question, this will allow the most accurate information to be presented. Read More...