Chase February 10, 2014 for Model Number glrsf266j I have a frigidaire glrsf266j and am looking for a ice maker to replace my broken one. I have searched around the websight and am not 100% sure which to buy. I don't need any of the other parts only the actual ice maker.
1 Answer Hello Chase! According to the model provided the replacement icemaker is part number 5303918277. Thanks! Read More...
Tommy December 16, 2013 for Model Number FRS26HF6BW2 Icemaker quit harvesting ice. It would get water and freeze but wouldn't harvest. I could force the harvesting arm to start and it would go on it's on until it hit the ice and then stop and couldn't eject the ice. I put a new ice maker in and it is doing the same thing. I have read that the thermostat in the ice maker won't activate the heater for the mold and cause it to harvest if the internal temp of the freezer isn't low enough, is this correct. If so what does the internal temp need to be.
1 Answer Hello Tommy. Yes, the temperature needs to be between 0 and 5° to cycle properly. Read More...
Sam November 09, 2013 Water is going to the filter and from filter to dispenser but not from filter to ice maker, the best I can tell.
1 Answer Sam, You will want to check at the water valve to make sure that there is power getting to the water valve when the unit calls for water. If there is 120 vac when the icemaker calls for water then the issue will be in the water valve which would need to be replaced. If there is no power then the icmaker would need to be replaced. Read More...
Dave November 07, 2013 for Model Number FRT21FD3AW5 The icemaker is not working in our refrigerator (it only has ice, not cold water). I checked the water valve for resistance and that seems fine, but when I checked the incoming voltage in the plug that attaches to the valve, it only showed 26 volts. Do you know if this is the expected voltage, and if not, what could be wrong or need replacement? Thank you very much.
1 Answer Dave, You will want to make sure that the icemaker is cycling when you test the voltage at the valve. Also pull the icemaker out and check to make sure that the fill tube is not frozen. If the fill tube is frozen then you will want to replace the water valve due to seeping. If there is no voltage getting to the valve then you will want to replace the icemaker. Read More...
Phil October 10, 2013 for Model Number Frigidaire FRS20ZRGWA What is the correct replacement icemaker for this model? We purchased part # 241798201 and wiring harness is not similar to original icemaker and will not connect.
1 Answer Phil, according to the model number supplied the replacement icemaker is part number 5303918277. Thanks! Read More...
Dan M October 07, 2013 for Model Number GE TBX18sA Bought ice maker ( ELECTROINIC ) some years ago and now the pump motor is no good.. Can not find replacement.. It has numbers on it like : K-749734 and 282co2 a mark invensys .. coil burned out ? need to replace if I can find one ... You video to change Ice maker was great but did not include water supply pump info..
1 Answer Dan, The correct icemaker kit for your unit is part number WR30X10093. This is the new design that GE came out with and works on your GE model. Read More...
Frank C October 02, 2013 for Model Number FRT22IRSHB4 trying to replace the ice maker. by issue is with the wiring harness on the replacements i've purchased (and had to return). the connector at the end of the harness is flat, 4 wires side by side. the recieving connector in the freezer is square. so while the the color of the wires are all the same, there's no way to plug a flat connector into a square one. before i spend the money on this unit, can someone confirm that the end of the adapter harness is square? i can't tell from the picture.
1 Answer Hello Frank. 241798231 is the icemaker your model number calls for and should work in the unit. Read More...
Bo September 06, 2013 for Model Number FRS22ZRG I have a Frigidaire frig and freezer, model # FRS22ZRG. Have had this unit for about 12 years. Need new ice maker and don't know how to find model number in order to change the old one out. Can you help? Thank you
1 Answer Hello Bo. Based on the model number provided, 241798231 is the correct icemaker. Read More...
Jerry September 01, 2013 Frigidaire ref ice maker in freezer. Plastic front gear that turns the ice cube ejector is broken, where can I get one?
Bob P July 14, 2013 for Model Number FRS26ZSH and thats from the door! I installed the ice maker part#5303918277. It works the cube sizes are fine, but it takes 1 hour and 45 minutes to make cubes? is this normal? could the water valve be delivering water every 2 cycles? Is there an adjustment on the front dial to decrease the intervals? thanks for your help, Bob
1 Answer Hello Bob. Yes, about every 2 hours it should dump ice. There is no adjustment. Read More...