Customer Questions and Answers for Compressor Start Kit by Frigidaire

Vincent, Unfortunately we are unable to supply the PSI on the refrigerant lines but based on the information if the compressor is running and shuts off then trys to come right back on then this will most likely be either the start device on the side of the compressor or a faulty compressor.

Vincent, We will need your model number to help you find the right parts for your unit. Please post another question with all your info included thank you

Hello John, The problem you described is either caused by a bad start relay on the compressor, a restriction in the sealed system, or a bad compressor. The start relay is where you should begin. If you remove it from the compressor and shake it, it should not rattle. If it does, the relay will need to be replaced.

Hello Laura. No, for your relay you need to order 6749C-0014E. Thanks.

Lynda, Yes the starter kit 5304491941 should work for your unit.

Hello Darron. Based on the information you provided, the fan motor is bad and will need to be replaced on the unit.

Hello Mike. We do not have the specs on the parts from the manufacturer. You would need to contact them for that information. All we can do is recommend the manufacturer replacement part for your model number which is part number 5304491941. You can try the other kit and see if it works. If so, you should be fine using it. Thank you.

Wayne, The white wire will go to the terminal that is closes to the center pin that sticks off the relay.

DonkeyII, This issue would most likely be caused by a selector switch issue which is part number 309322604.

Hello Marvin, I'm sorry but if the compressor is not starting immediately and has failed again, the compressor has an internal problem which will require the compressor 5304511983 replacement. It will require a Freon certified technician to complete the sealed system repair.