Pat March 05, 2015 for Model Number LTF6000ES0 Washer gets a dr code and door will not lock. What could be the problem?
1 Answer Hello Pat. It sounds like the door lock 131763256 is bad and will need to be replaced on the unit. Read More...
Tom January 24, 2015 for Model Number FAFW3511KW0 I want to make sure I have the right door strike part number for this model. Thanks.
1 Answer Tom, The door strike that is showing that goes to your unit is part number 131763302. Read More...
Katherine November 12, 2014 for Model Number Frididare front load washer ATF6700FE1 When door shuts it will not lock to let machine start.
1 Answer Katherine, You will want to inspect the door strike on the door and if the door strike checks ok then the most likely cause for the issue will be a latch assembly. Read More...
Michelle September 06, 2014 for Model Number FWT449GFS1 Striker is broken and I think the door latch mechanism is going too. What are the part numbers for the frigidaire gallery FWT449GFS1 for the striker and door latch?
Willie September 02, 2014 for Model Number ATF6700FS2 Around the hinge area, the door is loose and I'm not sure what it is called but the housing that the screws goes in when being tighten has broke i guessing that why the door is loose.
1 Answer Willie, If the hinge bracket support is broken then this would cause the door to be loose. The part number for the hinge support is 134550900. Read More...
Ruby August 19, 2014 I change the striker on my front load washer and now the pause light come what went wrong.
1 Answer Ruby, To be able to assist properly we would need to have the model number of your unit. Read More...
Jan August 14, 2014 for Model Number ATFB6700FS0 Hi what model of striker would work with my model (it is a Frigidaire front side washer). The Door latch broke.
Flora June 27, 2014 for Model Number ATF700ESO What is the correct door striker part number for my washer?
Cassandra June 02, 2014 for Model Number FAFW3577KR1 At first the washer would start, the door would lock but when it would spin it would hum and pause. We cleaned out the drain plug and had the same issue so I replaced the door latch, the issue then became as soon as you started the washer it would imediately pause and the door would not lock. I then replaced the control board and the same issue occured. I really can't afford to replace many more parts so if you could help it would be greatly appreciated.
1 Answer Hello Cassandra. Check the strike and make sure it is good. If so, you may need to replace the wiring harness on the unit. Read More...
Chris March 31, 2014 for Model Number Frigidaire ATF6000FS0 The top pin of my door strike broke off inside the latch. Does this mean the latch failed in some way? How do I "unlock" the latch so I can pull out the broken plastic pin?
1 Answer Hello Chris, You will have to close the door and power the unit on and off until the door lock assembly unlocks. If it will not, the door lock/switch assembly 131763256, the door strike 131763310, and harness number 134606800 will all require replacement. Read More...