Julie May 31, 2022 for Model Number LGHS2644KMO Which filter do I use? And what is the difference, please, between Model #ULTRAWF and Model #WFCB Thank you.
1 Answer Julie, Based on the information provided the OEM filter for this model is listed as Water Filter ULTRAWF / ULTRAWF Link to part: https://www.appliancepartspros.com/frigidaire-water-filter-ultrawf-ap4455158.html Read More...
Parbin May 19, 2022 for Model Number fghs2631pf4a My refrigerator is not showing the freezer and cooler temperature. It's showing dash - as freezer temp and glitchy number as cooler temp. I open the user interface and there is one wire that is not connected it's the black and blue wire. I can't find any piece to buy that connects to it. Please help me. Thank you.
1 Answer Parbin, This will most likely be an issue with the user interface 5304527931 being faulty. We are not showing that the black and blue wire is being used and may just be a ground wire. Read More...
Polly April 20, 2022 for Model Number polly.hopkins@gmail.com my frigidaire fridge is model FGHD2368TF and it says i should use EPTWFU01. Can i use WF3CB instead?
1 Answer Polly, These are 2 totally different filters and will not work in place of each other. Read More...
Linda September 29, 2021 for Model Number FGHS2665KF1 How do you take off and reinstall the water filter?
1 Answer Linda, Thanks for the question!!! According to your owner's manual, your filter should just pull out and the new one would just need to be lined up and pushed in. Read More...
Cathy June 20, 2021 for Model Number FFSS2315TEO I replaced my water filter on my Fridgidaire FFSS2315TEO and it is giving a flashing H. What does that mean and my fridg is not cooling as it should since that. I thought the new filter was bad so I returned it and got another one and it still does the same. It gives a beep when I open the refrigerator. It has never done this before. What does the H mean?
1 Answer Cathy, this is going to indicate high temperatures in your appliance. It would be recommended that the evaporator in the freezer is inspected to identify if it is congested with heavy frost as this can prevent cold air from circulating. If there is no frost on the evaporator, the condenser coils next to the compressor would need to be inspected for dust collecting and cleaned as necessary. Read More...
Richard March 01, 2021 for Model Number FFSS2615TS5 My refrigerator has a filter model WF3CB. The manual says I could use Model ULTRAWF also. When I tried to replace the old filter with the ULTRAWF it would not lock. I take it that they are not interchangeable. Am I right.
1 Answer Richard, the manufacturer does say that the original filter WF3CB should be able to be replaced by the alternate filter ULTRAWF. However, as it will not lock into the filter base, it would be likely that the filter base in your unit is not able to accept the alternate filter (if the original filter will install back into place). Read More...
Alyssa February 24, 2021 for Model Number FFHS2611LBC The filter currently In my Frigidaire fridge model # ffhs2611lbc has puresource filter number wf3cb. Can I use the Puresource ultra model ULTRAWF as a replacement?
1 Answer Alyssa, The filters would not be able to be interchanged and you would want to use the one for the unit. Read More...
Steven December 18, 2020 for Model Number FPHF2399PF7A I have a Frigidaire refrigerator and it uses the ULTRAWF filter. I went to replace it and was able to pull out the old filter. I went to put in the new filter and it will not lock in place. Both filters are the same ULTRAWF. I was able to easily install the old filter back in place.
1 Answer Hello Steven, This sounds like you have received a bad new filter. If you ordered this filter from us I would recommend you call us at 1-877-477-7278 and have us send out a replacement filter under the part warranty. Thank you for your patience and understanding in this matter. Read More...
Sally L. October 15, 2020 for Model Number FGHC2331PFAA I purchased 3 new genuine filters ULTRAWF and one from Home Depot. None of them would lock in when I install them. I have replaced these filters every 6 months since I own this frig. The existing filter that is installed will lock in every time I remove and replace it, so why are the new ones not locking in ? It's a mistery to me. Any help is greatly appreciated.
1 Answer Sally, With the correct filter being ordered and installed ULTRAWF/ULTRAWF Frigidaire Puresource Ultra Ultrawf Refrigerator Water Filter then the issue would be a defect in the locking mechanism in the 242009602/242009602 Water Filter Base( it probably occurred when the filter that does work was installed or removed). Thanks, Read More...