Roger January 09, 2023 for Model Number GTW485ASJ4WS No matter which setting is used the washer does not spin the clothes adequately. I can wring water out of the garments by hand. Does this sound like a main control board issue?
1 Answer Roger, Yes, the main board would certainly be the most likely cause for this issue. Read More...
Tim January 03, 2023 for Model Number HTW240ASK6WS The washer fills for a couple of seconds then cut off then fills again for a second or two,then stops won't do anything.Will pump out water if you put water in tub. Won't drain and spin, tries to run but will shut down. Could the problem be the main control board?
1 Answer Tim, Thanks for the question!!! Yes, this would likely be a main control issue. Read More...
Ken December 11, 2022 for Model Number gtw485asj1ws When you plug washer in, it goes into a pump out and never cycles off. If you try to clear the cycle, it jumps back into drain and pumps out. The diagnostic sheet seems to be missing. Thought it might be the lid switch, but that didn't fix it. Suspecting the control but thought I'd run it by you guys first. Any ideas? Thanks, Ken
1 Answer Ken, Check the pressure hose to ensure that it is not clogged in any way but if that is good then the main control board will be the most likely cause for this issue. Read More...
Lorenzo T November 28, 2022 for Model Number GTW330ASK4WW Well here i have a G E washer the one have a problem the washer start to let the water inside the basket but stops there nothing happened just estay there is not going to the next do you know wat is wrong
1 Answer Lorenzo, The best option is to get the tech sheet from inside the unit and put it into service diagnostics and see if there are any error codes. This will help to guide you to what may be wrong with the unit. Read More...
Gary November 17, 2022 GE Top load washer model #GTW460ASJ6WW. Washes and get to spin cycle, pumps water out but does not spin out. Washer will sometimes complete spin cycle. Replaced control board but problem still there at times.
1 Answer Hello Gary, sounds like the mode shifter assembly is failing, it is part WH03X30517. Read More...
Bozosboss August 25, 2022 for Model Number GTW460ASJ5WW Washer stops after agitating, does not progress to drain and spin or rinse. Found that the drain pump motor was damaged. The motor rotor had "eaten" through the housing causing the rotor to lock up. Replaced same. Lid lock mechanism was not working so I replaced the entire lid lock mechanism (Harness, switch, etc.). Running through the maintenance diagnostics I could now get the tub to drain but the spin test would not work since the lid lock would not lock. Checked the J513 connector on the control board and found that one pin (1 or 3) had 120vac constantly ON (is this proper?). From the J513 connector to the lid lock switch I measured 100 ohms between pins 1 & 3 with the lid closed and zero ohms with the lid open. No other continuity could be found between pins 1 - 2, or 2- 3. I am now out of $156+ and debating whether I should purchase a new control board. Any thoughts on this??
1 Answer Bozosboss, With what you have tested, it does sound likely that the control board will be the cause for this issue. Read More...
Tom August 23, 2022 for Model Number GTW330ASK2WW (G3) My washer was not agitating, rinsing or spinning after a heavy unbalanced load. I checked the error codes in field test mode and of the several code, two pointed toward the Mode Shifter, which I replaced. The washer spun once in test mode but when I started a load, it agitated but failed to spin again. So I ordered a control board and received the instructions in the package... Regarding the Personality ID, my washer has stickers on the back of it and in the control board cabinet identifying G3 but the instructions for Personality don't identify G3... It has K0/K1/K2/K3/K4 for the GTW330
1 Answer Tom, the model provided would use the personality for the GTW330**K2 as the asterisks are indicating the two letters prior to the letter and number K2. Read More...
B August 02, 2022 for Model Number GTW330ASKOWW Your add shows part number WH22X35137 (control Board) but when I click to see if compatible it says not compatible. Click on parts for GTW330ASKOWW and same part number comes up WH22X35137. Is this correct part?
Brian May 26, 2022 for Model Number GTW330ASKWW I need to replace the Board in my washer and was wondering if this was the correct part Ui& control board TL27 LE WH22X32357/ AP7012223
Sasha May 21, 2022 for Model Number GTW220ACK4WW The initial issue was that the washer was not draining or spinning, my technician suggested changing the control board after doing numerous tests. The control board was changed to WH22X32357, an updated model of the original board. After the board was changed, the initial draining/spinning issue was resolved but now the machine isn't filling to a proper water level. The max level it will fill is at a depth of 2 inches deep. I've selected small, med, large, and super water levels with and without the deep rinse option but the water level has not changed.
1 Answer Hello Sasha, The new board has a different issue and will need to be replaced again. If you ordered it from us, please call us at 1-877-477-7278 and we will set up a part replacement under the part warranty. If you got the part from another supplier, contact them for a warranty part replacement. Read More...