1 Answer Hello Mark. This unit has both diameters, the inlet is going to be 1/4" and the outlet is 5/16". Thanks! Read More...
Matt January 31, 2014 for Model Number PSS25SGNA I am not getting any water to the ice maker or water dispenser in the door. I have run a line through all of the hoses I can reach and nothing appears to be clogged. There is no water in the resevoir assembly. Nothing is frozen. The damper was recently replaced because of freezing temperatures in the food section. I have replaced the water filter and the water control valve with zero improvement. Is the next step to replace the water filter head?
1 Answer Matt, If the water tank is not frozen and all the lines are clear then the water filter head and tube assembly WR02X45206 would be the necessary part to replace. Read More...
Tom September 19, 2013 for Model Number GSS25JFMBWW Looks like part number ap3414864 is the replacement head assembly for where the water filter attaches to. When the filter is put on it leaks a small drip. So by replace the head assembly will this correct the problem? Thanks Tom
1 Answer Hello Tom. If the filter head is leaking, you will need to order and replace the water filter head on the unit. Read More...
Thomas Morgan August 12, 2013 for Model Number Fridge Model pss26sgrbss I suspect my filter assembly is clogged. Is there an easy way to unclog this. I have removed it so I can use air if needed. Filter assembly part WR17X11618. Thank you.
1 Answer Thomas, There is no way to unclog a filter head assembly. You could try to flush it with the filter out but if no luck then you would need to replace the filter head assembly WR02X45206. Read More...
Nephtali May 20, 2013 for Model Number GSS25SGMD BS I have a GE refrigerator model GSS25SGMD BS. Everything was working fine until I changed the Smartwater filter with an OEM replacement. No water when pressing the dispenser. Even when the old filter was installed again, still no water was dispensed. Also, I noticed a leaking in the water filter head assembly (where the filter is installed). The filter head assembly have a black notch that is leaking. I shut off the water supply from the house to the fridge to stop the dripping of the head assembly. Should the water filter head be replaced?
1 Answer Nephtali, The water filter head would need to be replaced due to the leaking. For the dispenser door not dispensing water you will want to pull the lower grill on the refrigerator and disconnect the lines. Press the dispenser with set to water and see if water comes out. If so then you have a frozen water line in the freezer door. There is a heater that you would want to get for this issue which is part number WR49X10173. Read More...
Celeste April 11, 2013 for Model Number GE refridgerator - GSS25TSRC SS When we take off old water filter to exchange, water gushes out, is there a check valve we can replace ourselves? We already replaced o rings which of course didn't help.
1 Answer Hello Celeste. If the unit is leaking and will not stop, you will need to order and replace the water filter head assembly WR02X45206 on the unit. Read More...
Mn February 22, 2013 for Model Number gsh25kgmcbb I have a leak in the hose running from the wall to the filter assembly. The filter assembly is operating just fine. Can I just replace the hose or is this impossible given the design of the filter assembly?
Brian February 09, 2013 for Model Number psc23ngmdww I purchased a wr17x11618 filter head and tubing (tube was leaking), can it be removed from inside the refridge box or does the rear metal cover have to be removed? Thanks
1 Answer Hello Brian, This is located in the top rear of the fresh food section of the unit. When you open the fresh food door it will be at the top on the right. The filter mounts to it. Read More...
Yannik January 30, 2013 for Model Number GE pss25sgnabs What part I have to order filter head and tube or valve kit. Just bought house and have a GE PSS25SGNABS fridge working good but water and ice not working. I put a new genuine water filter same things. I tryed something behind the refrigerator I have two clear pipe come from the top behind the water filter and one go to valves and other water line in. I switch it to see and its work now, makes ice and have water but its make noise when I take water or make ice. Do you think its the valves kit or other things from filter area (the noise come from filter area).
1 Answer Hello Yannik, This would be a filter head and tubing issue. When you reversed the lines, you switched the way that the water is flowing through the filter head. This is what is causing the noise that the unit is making. You will want to replace the filter head and tubing assembly WR02X45206. Read More...
Dan K January 18, 2013 for Model Number ess22xgmbcc I've got a leak on the filter head assy. It seems to be coming from the back of the filter holder. Could this be the o rings , the tube, or is there a burr on the assy it self?
1 Answer Hello Dan. Based on the information you provided, you will need to order and replace the filter head assembly WR02X45206. Read More...