Folly March 19, 2012 for Model Number GSS25QGMDWW The water flow coming out of the door dispenser is very slow, almost a drip. I have traced the lines and there are no kinks which leads me to beleive there is something going on in the dispenser. Any ideas of what to look at or replace?
1 Answer Hello Folly. I suggest to remove the water supply line from the water inlet valve and insure proper water pressure to the unit. If this check to have sufficient water pressure, I would next remove the water valve from it's mount and remove the water output line from it and dispense water to ensure the water valve is opening fully. If this checks out I would next disconnect the water line from the base of the freezer door and insure good pressure. If you get low pressure at any point, this pinpoints where the problem is originating. Most of the time this complaint is either caused by low water pressure or a bad water valve. Let me know if I can further assist and have a great day! Read More...
Jimmy December 30, 2011 for Model Number gss20iepjww When I dispense water at door it also runs out of lower freezer door mount between the black washer things. I took door off and water line is in two pieces. Is this right? Should there be a connecter between the lines?
1 Answer Hi Jimmy. The correct water line coupler for your unit is part # WR02X11330. Make sure if you need to cut the line for any reason, that it is cut squarley as the fitting will leak otherwise. Thank You. Read More...
Steve August 14, 2011 for Model Number GSS22JETABB The water dispenser will not turn off. It runs full stream unless turned off at the wall spigot behind the refrigerator. What do I need to do to repair this? Thank you Steve
1 Answer Hello Steve. Try unplugging the unit and see if the water stops coming out. If not, you will need to replace the water valve WR57X10050. Hope this helps. Read More...
Bill J May 18, 2011 for Model Number psc23sgmbbs Our ice maker works o.k. but the water dispenser quit working about a year ago. We have tried it with and without the filter but it is still not working. What part should we replace?
1 Answer Hello Bill. You may want to check the water lines to make sure they dont have any ice frozen into them preventing the water from moving. You may also want to look at the control board for your dispenser WR55X10195 or the water valve WR57X33326 to see if the dispenser solenoid has failed. These parts are testable with a mutli-meter MA-DM1. I will include a link with instructions on how to use one. I hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Oliver W. March 01, 2011 How do you stop the drinking water from freezeing? The Ice maker works but no drinking water. Thanks
1 Answer Hello Oliver, the manufacturer actually has kits to help with the water issue. We will need your model number to locate the correct kit for you unit. Here is a link to our repair forum regarding this issue: http://forum.appliancepartspros.com/refrigerator-freezer-repair/6787-ge-fridge-ice-maker-works-water-dispenser-does-not.html Read More...