Heather March 05, 2022 for Model Number Wfg505mobb2 Looking to convert back to natural gas i have all the stove top orifices for the natural gas but I need to know know what orifice I need to covert the oven burnner back to natural gas? I am looking for the orifice that goes inside the oven so I can bake please Thank you
1 Answer Heather, the safety valve WP98014893 would be needed to convert the oven back to natural gas. Read More...
Steve February 23, 2022 for Model Number WFG524SLAB1 This unit is currently LP and I am switching to Natural Gas. I have the surface burner orifices but I'm not sure what I need for the broil and bake orifices.
1 Answer Steve, the gas valve WPW10602001 and broil elbow W10853603 would need to be replaced to convert the oven to natural gas. Read More...
Nayla October 28, 2021 for Model Number WFG770H0FZ0 I'm trying to convert whirlpool range WFG770H0FZ0 from LP back to natural gas. Is there a kit for this or do I have to order each part separately, and what parts would I need to do this? Thanks!
1 Answer Nayla, the right-rear W10732136, right-front W10178934, center W10432324, left-rear WPW10170507, and left-front WPW10347414 surface orifices along with the broil fitting W10776437 and the regulator W10919226 would be necessary to convert back to natural gas. Unfortunately, the manufacturer does not provide a natural gas conversion kit. Read More...
Nayla October 28, 2021 for Model Number WPWwpw10347414 I'm trying to convert LP back to natural gas ..I know there isn't an existing kit for this because that would make too much sense but I'm trying to track down the parts. Thanks!!
1 Answer Nayla, if the model number of your appliance could be provided in a new question, this will allow the most accurate information to be presented. Read More...
Nick October 24, 2021 for Model Number WFG715H0ES0 I was hoping someone might be able to help me out getting the conversion kit for this range. I have purchased it used and it was for natural gas. I will be using propane at its new home. So I understand I need the kit for the 5 burners. What is the exact part number for that as I tend to find many options when searching. Also, is there anything else I need for the stove portion (i.e., bake, broil, etc.) or is that something that just gets adjusted? Thank you
1 Answer Nick, For the top surface burners, you will need to get conversion kit part number [WPW10170516], and for the bake and broil you will need part number W11087486. Read More...
Jodie May 09, 2021 for Model Number WEG745H0FS0 Is there anything at the gas connection that I have to change to put it back from LP to Natural gas?
1 Answer Jodie, There is a brass cap on the regulator that you will pull out and flip over from LP to Natural. Read More...
Jodie May 09, 2021 for Model Number jlkinder63@icloud.com I have a WEG745 gas range that is set up for Propane, I want to switch it back to Natural gas. What is the kit number for the gas orifices?
1 Answer Jodie, There is not a natural gas orifice kit and you will need to get each orifice for the top which will be left front W11690133, left rear W10756981, right front W10821182, right rear W11752198, and center W10256129. For the oven, you would loosen the orifices 1 1/2 to 2 turns and close the air shutter to 3/4 of the way open. Read More...
Duane August 21, 2020 for Model Number MGR8674AS1 I have this stove that I converted to LP when purchased. Now I want to convert it back to natural gas but I have misplaced the natural gas orifices so now I need to see what it will take to get them. Is that kit available to convert it back to natural gas.
1 Answer Duane, the natural gas orifices are as follows for the model provided: right rear orifice WPW10170506, center orifice WPW10170507, left rear orifice WPW10170508, left front orifice W10853607, and right front orifice WPW10347414, broil orifice fitting W10583216, and the regulator and valve assembly WPW10602004 would be needed. Read More...
Linda October 27, 2018 for Model Number WFG540H0AB1 Do I need to change the regulator to convert from natural gas to propane.
1 Answer Linda, There is a cap on the regulator that you would need to flip from Nat to LP. Read More...
Larry March 12, 2018 for Model Number WFG540H0ES0 What orifices do I need to convert this range back to natural gas? it is been changed to LP and I want to change it back to NG. Whirlpool model # WFG540H0ES0
1 Answer Larry, To convert this unit back to natural gas you will need the following orifices right front WPW10347414, the right rear W10732136, left rear WPW10170507, left front W10178934, and the center W10251991. For the oven you will need to loosen the orifices 1 1/2 to 2 turns and close the air shutter to about 3/4 of the way open. On the regulator you will need to flip the cap from LP to NAT. Read More...