Joe February 01, 2014 for Model Number GD5NVAXSY01 Ice maker not filling with water. Ensured sufficient water pressure from line and the actual water dispenser flows perfectly. Infrared receiver blinks twice intermittently regardless of the door or sensor position as well if it is turned on or off. The ice maker maker would periodically get a cube stuck in the rotating blades. Once I dislodged the cube it would make ice again. Again - no water is now making it into the actual maker. Checked for frozen line by removing ice maker. Seems or appears to be unobstructed. Is it the sensor or should I replace the entire ice maker?
1 Answer Hello Joe. If it keeps blinking, you will need to replace the board kit on the unit. Read More...
Andrew February 01, 2014 for Model Number Kscs25inss00 Ice maker not making ice. Right side if freezer receiver board keeps blinking twice in succession even when I close the flap on the emitter died. What does this mean?
1 Answer Hello Andrew. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/29618-ice-maker-not-working-kitchenaid.html Read More...
Barbara B December 17, 2013 for Model Number KSS048QMB01 Kitchen Aid refrigerator side by side The electronic control board part W10219463 is no longer manufactured by Kitchen Aide. What part would replace that?
1 Answer Hello Barbara. W10219463 has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. The Part Must Be Returned For Repair. Corecentric Solutions 866-737-2244/ Corecentricsolutions.Com Read More...
Steve December 15, 2013 for Model Number 106.55526400 Ice maker doesn't work, replaced ice maker as advised by repair tech, still doesn't work. Is the problem possibly the emitter and receiver. with the door switch made and the flapper closed the emitter doesn't blink or come on.
1 Answer Hello Steve. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/29618-ice-maker-not-working-kitchenaid.html Read More...
Liz December 05, 2013 for Model Number ksrs25ihbu02 I installed this board and the lights on the dispenser won't stop blinking. Everything is working ok. How do I make this stop?
1 Answer Hello Liz. The P.C. board should not make the dispenser lights blink. You will need to check and make sure the wires going to the dispenser board are good. Also, look for bad wiring at the hinges of the unit. Read More...
Bob B. November 27, 2013 for Model Number KSRG25FKSS04 Ice machine will not fill with water. I replaced the solenoid water valve and nothing. I removed the ice machine and jumpered the motor and it is working. I also jumped the T & H and it rotated around. What next? the two control boards?
1 Answer Hello Bob, If the ice maker still didn't fill with water and the water pressure to the valve is sufficient, the contacts in the ice maker have failed and the ice maker assembly 2198597 will need to be replaced. Read More...
Jan November 26, 2013 for Model Number gs6nvex Front control panel on exterior front freezer door has gone out......all lights and functions stopped working. What part is that ?
1 Answer Hello Jan. You will need to test and see if the main board WP2303843 is bad or if the display board is bad. Read More...
Dan November 25, 2013 for Model Number KSCS25FVMK The flap in the door through which ice is dispensed doesn't work most of the time (it does open and close properly about 5% of the time). I have replaced the circuit board part number 6105041 with a new one, but the problem remains the same. Suggestions? Thanks.
1 Answer Hello Dan. It sounds like the motor WPW10184813 is bad and will need to be replaced. Or it has a bad connection on the unit. Read More...
Linda October 26, 2013 for Model Number 6d25dixhw00 Fridge runs, does not cool. My thinking is possible the thermostat not sure possible the mother board not sure at this point. I need help on what to check that maybe causing the problem, I can hear the compressor turning on. Please help.
1 Answer Hello Linda. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/193358-freezer-fridge-not-cooling.html Read More...
Ken October 20, 2013 for Model Number KSCS25INBL01 I'm not getting any ice. I don't see any ice build up. The optics keeps flashing twice when I close the flapper. Is it the control board or another possibility? I get water from the dispenser. Tks
1 Answer Hello Ken. If the lights do not go solid, you will need to order and replace the P.C. board kit W11629974 on the unit. Read More...