Prathamesh October 14, 2016 for Model Number RBD305PRB00 This is a Double Wall Oven. When I try to turn it on, nothing happens. There is no response, no lights, nothing comes up.
1 Answer Pratheamesh, If you can hit the display and it beep then the most likely cause would be a transformer that has failed. You can test at the control board on the P16 connector from pins 5 to 7 for 120 vac if there is not 120 vac then check the fuse to make sure that it has continuity. If the fuse checks ok then the control board would be ok. If at the P16 5 to 7 there is 120 vac then you will want to test pins 2 to 3 for 24 vdc. If there is not proper power then the transformer is defective and would need replaced. If there is power then the control board is defective. The part number for the transformer is WP9760587, the fuse WPW10638608, and the control board WPW10438750. Read More...
Kenneth August 04, 2016 for Model Number RBD305PRB00 I have a whirlpool double wall oven that the display does not work, you open the oven door and the lights comes on and beeps and the touchpad seems to work but no display and it wont turn on.
1 Answer Hello Kenneth. You will need to replace the thermal fuse WP4456654 on the unit. Read More...
Mike June 14, 2016 for Model Number GBD277PDS09 While oven on works great, but when not operating beeps like crazy. I have to kill power to get to stop.
1 Answer Hello Mike. You will need to check and see if the control panel is bad or if the control board WPW10438751 is bad on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Eddie February 28, 2016 I have an accubake gas stove with single oven. The gas stove works, but the oven does nothing. Would that be the thermal fuse or the electronic control board?
1 Answer Hello Eddie. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Paul January 03, 2016 for Model Number Whirlpool RBD305PRS00 Does error code n0F0 E0 suggest replacing the Electronic Control Board?
1 Answer Hello Paul. F0 Will only be displayed if user presses and holds CANCEL key for 5 seconds and there is no pre-existing fault. Press CANCEL to clear display. If it continues, replace control board. Read More...
John T December 21, 2015 for Model Number GBD307PRS01 The lights are on in the oven but the display isn't lighting up. When I reset the breaker, the oven just beeps fast 5-6 times but no display.
1 Answer Hello John. You will need to check and see if the thermal fuse WP4451042 is bad and will need to be replaced on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Gilford November 02, 2015 Whirlpool model rbd275prs00. I am getting E1 F2 error on the displace and I am unable to do anthing on the display. What may I check on this unit? Thank you
1 Answer Hello Gilford. Keypad keytail not connected. 1. Check keypad connector for firm connection. 2. Press CANCEL. If error code returns after 60 sec., replace keypad. 3. Replace control. Read More...
Dennis October 01, 2015 for Model Number RBD307PDQ2 The display lights up but is very dim and difficult to see. The oven works otherwise.
1 Answer Hello Dennis. The control board 4448876 on the unit is bad. This part has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. Read More...
Robin September 25, 2015 for Model Number RBD275PRS00 Oven model RBD275PRS00 stop working. No display lights. When buttons are pressed, the beep sound is made. When oven door is opened, lights turn on. When "oven light button" is pressed, lights turn on. When upper over bake or lower oven bake is pressed then the start button is pressed there are 5 beeps total. 1st beep is short, 2nd beep is long and followed by 3 additional short beeps. What should I check first, second and or 3rd? Thank you in advance for trying to assist me.
1 Answer Hello Robin. You will need to test the thermal fuse WP4456654 in the wiring harness and see if it is bad and needs to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Linda August 02, 2015 for Model Number RBD245PRQ00 I replaced the control board but am now getting an F5 error. The ribbon was difficult to secure to the board but I now think it's seated well. We have tried holding down various keys to see if it will reset but it won't. If I hit the bake button, the oven temp of 350 displays but it can't be cancelled. Any ideas?
1 Answer Hello Linda. Based on the information you provided, the membrane 8304273 will need to be replaced. Make sure that ribbon is seated properly. If not, it is the reason for your issues. Read More...