Customer Questions and Answers for Dispenser Assembly by Whirlpool

Hello Billy. Sorry, but you will need to order the dispenser assembly WPW10199696 for the door. The manufacture does not offer it separately. Hope this helps.

Hello Dana. If the latch is broke, you will need to replace the dispenser WPW10199696. There is no parts available to repair the latch. Hope this helps.

Hi David. The rinse aid dispenser has a very small hole at the bottom of the dispenser that is a wax motor timed channel allowing the rinse aid to properly dispense. It will be on the front inner door side.This is part # WPW10199696. Thank You.

Hello Alejandro. If the dispenser is new and still does not open, and the wires to it are good, you will need to replace the control board WPW10084141. Hope this helps.

Hello Dave! Parts to the dispenser are not available separate. You will have to order the dispenser, part number WPW10199696. Thanks!

Hello Bdautotech. Yes, based on the model number you provided, WPW10199696 is the correct dispenser. Hope this helps.

Hello! The part will need to be replaced. You will have to order the dispenser WPW10199696 to obtain this part. Thanks!

Hello Bruce! Yes, the rinse aid dispenser cap is available separate. Your part number is WPW10077881. Thanks.

Hello Paul. According to the model number you provided, you do not need to use a gasket with this dispenser. You will need to check and make sure it is installed properly and the screws and bracket are good and tight. Hope this helps.

Hello Paul. What is the model number of the unit you installed it into? Thanks.