Tom H. December 02, 2012 for Model Number kudu02frss2 I have a broken cable on the door counter weight spring system. I have part kit #8194001 but the string is significantly shorter than the original. This does not seem correct.
1 Answer Hello Tom! According to the manufacturer the door balance link kit 8194001 is the correct replacement. Replace both door balance links at the same time. Thanks! Read More...
Liz November 29, 2012 for Model Number kuds35fx My door for my dishwasher completely came off the hinges. I think it's loose and moves around. It won't stay up on its own or stay locked. What kit do I need to fix it?
1 Answer Hello Liz, The dishwasher door hinges have slots that the other half of the hinge, which has pins, fit into. Raising the door and shifting it back into position will correct the issue without any parts. Read More...
John D November 28, 2012 for Model Number Kuds01djbL0 Door "falls open" Do I need both springs and a cable kit? Does dishwasher need to be pulled out or just access from front panel?
1 Answer Hello John. You need to uninstall the dishwasher and look to see if you need the spring or the cables. Most likely it is the door cable 8194001 that is broke, but it is best to check and see. Read More...
Chad P November 22, 2012 for Model Number kudso1fl556 I have a kitchenaid superba. The door wouldnt stay to shut to engage sensor in latch to allow operation. I replaced that latch, now door stays shut, but does not lined up enough to engage sensor in new latch. Do I need new hinges or a door balancing kit?
1 Answer Chad, You will need to check the hinges and the dishwasher frame, to make sre they are not bent or damaged. Also check the inner door panel, and make sure it has not been bent. The door balance kit does not have much to do with the door closing and latching. You will also need to check the door latch strike WP8574157 and make sure it is not damaged, bent or distorted. You don't have a "sensor" on the latch assembly. when the latch aligns and the strike enters the latch assembly, this allows the latch mechanism to "roll and lock the door, when this occurs, the door switches in the latch assembly are activated and the dishwasher operates. Read More...
John October 05, 2012 for Model Number KUDP02CRBLO` Kitchen Aid dishwasher: recently something broke in the mechanism that keeps tension on the door (it now falls quickly). Does it have a cable assembly or does it have springs? I would like to buy the parts I need before I pull the dishwasher out. Thank you very much.
1 Answer Hello John, This unit has a spring and cable door balance system. The cables and wheels come as a kit 8194001. The springs are WP8270182. You will have to order two springs if needed, but all of the parts for both sides all come together in the kit for the cables and wheels. Read More...
Chuck September 22, 2012 for Model Number KUD102FRSS0 What spring kit p/n do I need for a Kitchenaid model KUD102FRSS0 dishwasher? Thanks, Chuck
1 Answer Hello Chuck! According to your model number the door balance link kit 8194001 will work on your unit. Thanks! Read More...
Kick September 20, 2012 for Model Number KUDIO1FLSS6 Our dishwasher door is free falling, but it does close. There are white cables that are broken laying on the bottom of each side of the dishwasher, so it seems that we need to order the door balance link kit (Item Number: AP3775412 Manufacturer's Number: 8194001 Made by Whirlpool) right? But... I'm wondering if we need to order springs or anything else?
1 Answer Hello! It will more than likely be the door balance link that needs replacing. Inspect the springs to see if they are defective, if so, replace those as well. The door balance link kit is part number 8194001. Thanks! Read More...
Scott September 13, 2012 for Model Number KUD102FR KitchenAid Hello, Which part do I need to replace the door tensioner(s) for this model? I haven't removed the dishwasher, yet, to examine the problem, as my question is based on the fact that the door falls under its own weight.
1 Answer Hello Scott, On this model it looks like the only thing in the door closure assembly is the spring WP4162629. Some models have a spring and cable set-up with plastic links, but this one looks like the door spring connects directly from the door hinge to the frame. Read More...
Gary August 25, 2012 for Model Number Kitchenaid dishwasher KUDIO1fFLSS3 Type 577-0 Need a new door balance kit #8194001. There are two versions of this kit, one with short cords and one with longer cords. Without looking, is there a way to tell which version of this kit I need? If I order short cords and need the long, springs are overstretched and the door will not stay open and just the opposite with the long cords.
1 Answer Gary, according to your model number KUDI01FLSS3 the door balance link kit for your model is part number 8194001. Thanks! Read More...
Lydia August 21, 2012 for Model Number kudu02frss1 How do I install this part? Step by step instructions please.
1 Answer Hello Lydia! Please see the following steps to install the door balance link kit 8194001. Hope this helps! Thanks. 1. Open the dishwasher and remove the two plastic grommets about halfway down on either side of the opening. Then remove the two screws under the grommets. 2. Remove the kick plate under the door. May have to lower unit by turning the feet using the adjustable wrench. 3. Make sure you have enough slack in the water input line and electrical wiring that you can pull the dishwasher out about 12 inches or more. 4. There is a spring and nylon rope link on both sides of the unit. Probably just one link is broken, but the replacement comes with two, so you can replace both or save one as a spare. Look at the good side and it should be pretty self explanatory how it attaches. I found it easiest to first thread the link around the lower pulley, then attach the link to the spring, then spring to the rear support, then the link to the door. 5. Reverse (2 to 1) to reinstall the dishwasher. Read More...