Kim E November 14, 2022 for Model Number GR445LXMS0 A rear surface element on my Whirlpool range stopped working (no heat). I thought it might be the switch (and I have a question in for that), but now I am wondering if it could be the surface element. From other questions, I see you have recommended checking the circuits. Do you have photos or diagrams that indicate at which points to check continuity? For the switch and the element?
1 Answer Kim E, Check the tech sheet packaged with the range for the circuits and determine if the issue is the element or the switches. Read More...
Wilber August 06, 2022 for Model Number WFE 515SOEW0 My right front burner won't heat up. The cooktop light is lighting up like normal when turned on but no heat at all at the burner.
1 Answer Hello Wilber, This is most likely a bad surface element W11047722 but can also be caused by a failed infinite switch WP3149400. Read More...
Connell March 11, 2021 for Model Number RF262LXSB0 when I turn on the front left heat element it goes straight to the highest temp setting even if i turn it to low it continues to heat at the highest temp/level cant control the heat level
1 Answer Connell, This issue would be caused by a faulty Surface element switch WP3149400. Read More...
Tim October 12, 2020 for Model Number RF386PXGQ2 Hi, My largest burner stopped heating up - no heat at all. Switch light was on when turned on, just no heat. Could this be a bad surface element? The bad burner is the largest of the four burners, and it is located on the left bottom. What's the part number for it? Thanks!
1 Answer Tim, it would be recommended that the burner switch WP3149400 is tested to identify if the failure is in the element or in the switch. If there is 240VAC when testing the wires at terminal H2 to H1 with a multimeter and the switch is on, then the failure would likely be in the element W10823696. If there is not 240VAC, then the switch has failed. Read More...
Clark May 01, 2020 for Model Number 66595822001 I need to replace the large cooktop element for the Kenmore 665-95822001 oven. Do you have a part number for that item?
1 Answer Clark, the left front large element for the model provided will be part number W10823696. Read More...
Sean December 07, 2019 for Model Number RCC3024RQ00 My left front burner does not work. I checked for continuity and there is none. I know the burner is bad and I need the one that measures about 9 7/8 x 1 1/4 inches (the largest burn on my model). I have a Whirlpool stove top model number RCC3024RQ00.
Shane December 29, 2018 What is the correct part number to replace when the hot surface light remains on or flickers even when burner is off on model # rf196lxjq0? It is not the indicator switch as we ruled that out. Thanks
1 Answer Shane, This issue will be caused by a surface element sensor that is faulty. If it is individual lights for the burners then the issue will be the burner that the light is staying on. Read More...
Shelly July 27, 2018 for Model Number WFE515S0EB0 Can I get the wire clip (Non-Insulated Female Push-On Terminals)? The wire clip is burnt out into ashes.
1 Answer Hello Shelly, You will need to order receptacle kit 330031. The wires and connectors come with this kit. You will need to order one for each surface element you need the connectors for. Read More...
Kay B April 22, 2018 for Model Number RS696PXGB10 Need large front element ......looked it up and part # is 8523692........Is that the correct part, and does it come as pictured.......... The burner will not heat up at all........ Whirlpool Electric drop in range
Francisco April 05, 2018 for Model Number GR399LXHS1 I WANT TO KNOW WHAT SIZE ELEMENT GOES ON THE LEFT FRONT OF THE RANGE.
1 Answer Francisco, The correct part number for the left front surface element is W10823696 / 8272565 Element- Surface. It is referred to as a 8 in.(large) 2500 watt radiant element. The part is in stock and available at this time. Thanks, Read More...