Roy December 18, 2016 for Model Number WRS325FDAW01 What will cause the water to pulse and surge when you go to get a glass of water.
1 Answer Roy, The most common causes for this would either be water pressure, water valve or a faulty filter head. Try to remove the filter and see if this corrects the issue. If it does then you would want to get a new filter unless this one is new then it would be the filter head if it continues to pulse and surge or a new filter does not correct. Read More...
Bruce August 30, 2016 for Model Number 106.54783804 My fridge quit dispensing ice but still dispenses water. I don't know if it is the motor on ice maker or the water inlet valve. How would I check to find out?
1 Answer Hello Bruce. If the unit is making ice and just not dispensing it, it wouldn't be the water valve. You need to check and see if the auger motor WP2323345 is bad on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
1 Answer Hello Allen. The best way to test is for power to the valve. If you have power there and the unit does all water to come out, then the valve is bad and will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Angie November 08, 2015 In the video you didn't change the main water valve where the water is connected to the outside copper line this is the part I am looking for. I have a whirlpool side by side with water and ice dispenser in the door. Can you help me?
1 Answer Hello Angie. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. Here is a link to help you locate it. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Avi January 06, 2013 for Model Number Kitchenaid KSFS25FJWH01 Looking for Inlet Valve. The water is dripping out from the front where you get the water. I made sure that the water lines are secured. There is no water leaking from the Inlet Valve. I think that valve needs to be reaplce.
1 Answer Hello AVI. Based on the model number you provided, 2199838 is the correct water valve for the unit. Read More...
Michael June 30, 2012 for Model Number MSD2572VEW01 How do you remove the water lines from the water inlet valve?
1 Answer Hello Michael. You will need to press in on the plastic fittings on the water valve and then the water lines will pull out and remove from the water valve. These are compression fittings and can only be released when the compression fittings are pressed all the way down on the valve WPW10179146. Read More...