Brent C. July 01, 2013 I have a kitchenaid fridge and the water pump is an invensys k-75179. s-86 and 2219594 as well as 136C03 are also numbers on the label. Can you point me to the correct replacement part?
1 Answer Brent, 2219594 is the part number of the original valve. The manufacturer replacement is part number WPW10498990. Thanks! Read More...
1 Answer Bob, You will want to pull the icemaker and check for seeping from the icemaker. Also check to make sure that the fill tube is not frozen. If you do not see signs of dripping down the back wall or shelves then you will want to make sure that the drain behind the wall is not frozen which would cause frozen ice at the bottom of the freezer compartment. If the fill tube and icemaker check ok and the drain is not plugged then you would want to replace the water valve. Read More...
Terry June 03, 2013 for Model Number ed5ntqxk01 I replaced the icemaker and still no water to the tray. I think the water valve is the next thing to replace but do not find the part number for my Whirlpool model. I haven't yet pulled the unit away from the wall to get that part number but would really like to do that only once. Thank you.
Michael May 23, 2013 for Model Number ED22TQXN01 I am trying to troubleshoot an issue with only a few cubes or no ice being made. I get water from the water dispenser but if I unplug the tubing from the water valve at the top of the icemaker no water comes out. Is this a problem with the valve?
1 Answer Hello Michael. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Mark May 08, 2013 for Model Number kscs25inss00 superba My water dispenser is working but water not going to ice maker. When I open the door the light blinks twice pause and repeat. I changed the ice maker but it didn't help. I guess it might be dual water valve, but want to confirm. If so the part shows as 2315533 but then when I go to that part and check my model it says its wrong, then I go to that model and select valve from there and model check also fails. So what part? Great job on delivery of ice maker, arrived in just a couple days! Thanks!
1 Answer Hello Mark. It looks like WPW10159840 is the valve for the icemaker. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/29618-ice-maker-not-working-kitchenaid.html Read More...
Richard May 01, 2013 for Model Number Whirlpool-ET18PKXFWO1 My refrigerator is leaking on the inside in the back middle. I assume it is coming from the freezer section above. Freezer and fridge both seem to be working fine but I must leave a bowl in back of fridge to catch water.
1 Answer Hello Richard. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/173916-kenmore-top-mount-refrig-h2o-build-up.html Read More...
Andrew April 13, 2013 for Model Number ED5CHQXKB02 My ice tray is full of ice but water is leaking from the bottom of the freezer door on to the floor. I removed the ice tray as it would not dispense the ice and found that the bottom of the tray was frozen solid, obviously from too much water leaking into the tray. Is my problem with the water valve and not the icemaker unit ?
1 Answer Hello Andrew. Check the size of the ice cubes. If they are to large, replace the water valve. If they are small, but the unit is leaking, replace the icemaker. Read More...
Maurice O March 27, 2013 for Model Number just replaced #2188542 dual water valve Recently my side by side unit stopped dispensing water. It was intermittent at first, then stopped completely. In addition, the ice maker started to leak water. I checked the old valve unit, and found it to be inoperable. Today, I replaced the valve unit with a same number model and I still have no water. When I press the water arm, the valve unit does make a sound. There is adequate water pressure to the unit.
1 Answer Maurice, You will want to check the dispenser bracket to make sure that it is making contact with the microswitch and that the bracket is not broken. Read More...
Joe March 17, 2013 for Model Number G15SVAXVB00 Whirlpool french door refrigerator. Leaking outside on top left hand corner every time icemaker calls for water. Never saw a set up like this? Can't seem to get icemaker out? Not like others that have two screws that you have to remove. Started acting this way after water main leak that filled up filter. Replaced it then this happened. Water to door still works. just not making icecubes as its dumping water out the top.
1 Answer Joe, To remove the icemaker, on the left hand lower wall of the ice compartment there is a cover. To remove this cover you will use a small blade screwdriver in the small hole on the cover and there is a release. Once released the cover will pull out. With the cover off you will want to disconnect the wire harness under the cover and there is a lever on the on the icemaker that you will release. Once released pull on the icemaker and pull the complete unit out. Based on what you are describing it sounds like the tubing for the icemaker fill has broken and you would need part number W11415785 to replace. In order to replace the tubing you will have to remove the shelves in the refrigerator and remove the cover over the water tank. You will remove the square cover on the top of the unit and pull out the tubing. The tubing is connected to the water valve above the water tank. Read More...
Mike March 11, 2013 for Model Number 52012100 My kenmore fridge is not getting water to the icemaker. It does get water to the water dispenser. Is this the inlet valve?
1 Answer Hello Mike. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...