Scott July 25, 2011 for Model Number SF262LXSB During my wife's baking, our gas oven shut off and would not reignite. Now both the oven and broiler are not working, but the top burners function OK. I'm trying to find out what is wrong.
1 Answer Hello Scott. You will need to check and see if the control board is sending power to the spark module WPW10331686. If so, and the igniters inside the oven are not sparking, you will need to replace the spark module. If there is no power coming to the spark module from the control board, you will need to replace the control board WPW10114373. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Andrew July 16, 2011 for Model Number mgr7662ww My oven will not turn on. No gas is coming out of the stove when you turn on the oven. My broiler and burners turn on with no problem. Any ideas?
1 Answer Hi Andrew. The oven igniter usually gets weak and will not draw enough current to open the gas valve. It should glow a "white hot",not orange. This part # is WP9758079. Thank you. Read More...
Michael July 15, 2011 for Model Number Whirpool Range Model GS563LXSQ 0 Whirpool Range Model GS563LXSQ 0 The top burners work fine but the oven and broiler don't. We hear one click but then nothing. Tried lighting with match and it appears no gas. What's it's problem.
1 Answer Hi Michael. You may need the oven gas valve assembly part # WPW10293048. If both broil and bake are not working at the same time. If your top burners are working well then Without a manometer to test with, I would presume your gas supply is alright. Thank you. Read More...
Cecil June 15, 2011 for Model Number 665-75132300 My oven will not light at times,you can hear the igniter working and the oven will light and goes back out. It will do this several times sometimes it will stay lit and sometimes it won't. Tried taking oven apart and cleaning it. This did not help could this be a problem with the gas valve?
1 Answer Hello Cecil, from your description of the issue. You could have low gas pressure flow coming into the unit. If the gas pressure is okay, then you more than likely have a issue with the valve WPW10293048. Thanks! Read More...
Lanny June 15, 2011 for Model Number SF357PEK I recently replaced the spark module on this range. The top burners work but the Oven/broiler will not light. I measured 56v DC from orange wire to red or blue wire at the gas valve. The valve clicks when the oven/broiler is turned on but no spark or gas is present. What could the problem be?
1 Answer Hello Lanny. Based on the information you provided, it sounds like the igniter is loosing ground. You will need to replace the burner assembly 8190618 to repair the unit. Hope this helps. Read More...
Lanny June 11, 2011 for Model Number SF357PEK I replaced the spark module now the top burners work but the oven will not work. With the orange, blue and red wires disconnected I read 59 volts DC from the Orange to red or blue wires in the bake of broil settings. I am thinking I have bad valve. Am I correct?
1 Answer Hello Lanny. You will need to look for 10 volts DC at the safty valve, with the wires hooked to it. If the proper voltage is there, you will need to replace the gas valve assembly WPW10293048. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Hector June 07, 2011 for Model Number GS563LXSSO My 4 burners wont light up, ignitions seem to be working fine with plenty of spark, my problem is I have no gas flow after the selonoid.there is gas flow up until the selonoid, so I ordered two new selonoids and have same result.what controls the opening and closing of a selonoid? Or is it the hole computer brain?
1 Answer Hello Hector. According to the wiring diagram for the model number you provided, WPW10116542 is the unit that opens and closes the sendary cooktop solenoid. Hope this helps. Read More...
Hector M. June 06, 2011 for Model Number GS563LXSS0 My 4 burners will not lite up. I can see and hear the ignitors clicking. My oven works fine. I can not smell any gas at the burners. Is this part the problem or is it something else?
1 Answer Hello Hector! No, the oven gas valve WPW10293048 would not be the problem, that controls the gas to the oven. Check to make sure that the burner caps and base of the burner is clean and clear of any debris. Check to see if you can light the burners with a match, if you can then you may have a weak spark module WPW10331686. Thanks! Read More...
Will May 24, 2011 I have a maytag stove/oven that is about 18 months old and already replaced the following parts: timer console (where I key in the time/temp), spark igniter (inside up by the keypad), thermostat/sensor (inside the oven), open gas valve assembly unit. What else could be causing the issue? thanks. What is happening is after about 15 to 20 minutes the oven will not stay on. You can hear the spark igniter light the gas but then it will just go out. So either I have to up the temperature setting (example from 350 to 375) and it will stay until it reaches the 375 and then it will do the same thing, or let the oven cool down then use it for 15 minutes again.
1 Answer Hello Will. You will want to make sure you have enough gas pressure coming into the house. Sounds like the issue has to do with pressure to the unit. Hope this helps. Read More...
Mike May 14, 2011 for Model Number 665.75812001 I show approx 10 volts dc across the red / orange wires at the gas valve. Testing with ohm meter briefly jumps between about 169 - 20 but then almost immediately displays 1. Does this sound like bad gas valve?
1 Answer Hello Mike. If the voltage is there, and the valve does not open, you will need to replace the valve WPW10293048. Thanks. Read More...