Parts for Kitchenaid KRFF300EBS01: Refrigerator Door Parts

Color: Black

The Whirlpool thimble is an OEM replacement part responsible for providing support and stability to the refrigerator door hinge. It is typically located on the bottom or top of the refrigerator or freezer door, where the hinge attaches to the door frame. The thimble acts as a protective sleeve that helps reduce friction and wear between the hinge and the door, ensuring smooth and effortless opening and closing of the door. It helps to distribute the weight of the door evenly, preventing it from sagging or misaligning over time.

Causes of a bad thimble can include regular wear and tear from the frequent opening and closing of the refrigerator door, or damage due to misalignment or impact. A faulty thimble can lead to difficulty in opening or closing the door and may cause improper sealing.

Symptoms of a bad fridge thimble include:

• Difficulty opening or closing the refrigerator door
• Squeaking or grinding noises when the door is moved
• The door not sealing properly
• Visible wear or damage on the thimble

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement name plate restores the appliance identification label that shows model, serial and regulatory information. It makes it easy to identify the unit for service, warranty and parts ordering. What it does

• Replaces a torn, faded or missing identification label so model and serial info are readable
• Provides the appliance's regulatory and manufacturing details used for service and registration
• Helps technicians during repairs
• Prevents confusion when buying replacement parts or scheduling service

• Disconnect power to the appliance and move any panels aside only as needed to access the original name plate.
• Clean and dry the mounting area before applying; align carefully to ensure full adhesion and legibility.
• If the original was fastened with screws, rivets or brackets, retain and reuse the proper hardware.
• Avoid touching printed surfaces to prevent smudging; handle with care.

The Door Cam is an OEM part for Whirlpool refrigerators. This small but essential component is part of the refrigerator's door hinge mechanism, facilitating the smooth and controlled opening and closing of the door. The door cam works by providing a slight lift when the door is opened and easing it into a closed position, ensuring a tight seal without requiring excessive force.

Over time, door cams can wear down or break due to the constant friction and weight they bear with each door movement.

Symptoms of a bad Door Cam include:

• The refrigerator door feels loose or sags
• Increased difficulty in opening or closing the door
• A noticeable clicking or scraping noise when the door is operated
• The door fails to stay closed or does not seal properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The French Door Bin is an OEM part for Whirlpool refrigerators. This durable bin attaches to the inside of the refrigerator door, offering convenient access to frequently used items such as drinks, condiments, and snacks. 

Causes of a bad French Door Bin can include overloading beyond its weight capacity, impact from items being moved in and out of the refrigerator, or degradation of the material over time due to the cold environment and frequent use.

Symptoms of a malfunctioning French Door Bin include:

• Cracks or breaks in the bin that prevent it from holding items securely
• Difficulty attaching or detaching the bin from the refrigerator door
• The bin sagging or not sitting flush against the door, indicating potential damage or wear

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Black

The lower part of this container is part number W11106787.

Restore clean, convenient storage with this Fresh Ready Bin. It replaces a damaged or missing small bin in the fresh-food compartment, helping you keep grab-and-go items organized, visible, and easy to access.

• Provides dedicated storage space for snacks and produce in the fresh-food section
• Slides/snaps into its designated location for a secure fit
• Helps prevent spills and clutter by keeping small items contained
• Common failure symptoms: cracked plastic, broken tabs, bin won't stay seated, or missing bin

• Remove the old bin by lifting it up and out of its mounts; clear the area of contents first
• Align the new bin with the tabs/rails and press or slide into place until fully seated
• Do not force; allow cold plastic to warm to room temperature to reduce the chance of cracking
• Hand-wash with mild soap and water; dry completely before use

This refrigerator door shelf bin is the shallow-style rack that mounts to the inner door liner to hold smaller items. Replace a cracked or missing bin to restore secure, organized storage and keep condiments and jars from tipping.

• Holds and organizes smaller items on the refrigerator door
• Replaces bins that are cracked, broken, loose, or fall off the door
• Helps reduce spills and tipping when opening/closing the door
• Designed for the shallow bin positions on applicable models

• Lift the old bin up and out; align the new bin's hooks with the door rails and press down until fully seated
• Do not force onto the wrong mounting rails—shallow and deep bins may mount in different positions
• Handle plastic carefully; avoid installing when very cold to reduce risk of cracking

This mullion rail is the trim piece that secures and finishes the gap between refrigerator doors, improving seal alignment and giving the cabinet a clean, finished look. It restores proper door fit and appearance. What it does:

• Holds the mullion/trim in place along the door opening for a consistent seal and appearance
• Helps keep door gaskets aligned to reduce drafts and improve cooling consistency
• Prevents the trim from flexing or separating when doors are opened and closed
• Addresses visible trim damage, loose or missing mullion pieces, and uneven door gaps

• One mullion rail trim piece

• Disconnect power to the appliance before starting work to avoid injury
• Remove any door liners or screws that cover the mullion before replacing the rail
• Handle trim and clips carefully to avoid cracking; small retaining clips or screws may be reused if undamaged

The Bracket is an OEM part for Whirlpool refrigerators. It is designed to provide support and secure various internal components within the refrigerator, ensuring they remain in place and function correctly.

Causes of a bad bracket can include normal wear and tear, physical damage from accidental impacts, or stress fractures due to heavy loads or improper installation.

Symptoms of a bad bracket include:

• Loose or misaligned internal components
• Unusual noises or vibrations from inside the refrigerator
• Visible cracks or damage to the bracket

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Handle Mounting Screw is an OEM part for Whirlpool refrigerators. It secures the door handle to the refrigerator door.

Causes of a bad door handle mounting screw can include wear and tear over time, improper installation, or excessive force applied to the handle. These factors can result in a loose or wobbly handle, compromising the functionality and aesthetics of your refrigerator.

Symptoms of a bad door handle mounting screw may include:

• A loose or unstable handle
• Difficulty in opening or closing the refrigerator door
• The handle becoming detached

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.

Symptoms of a bad Bracket-Door Stop include:

• The door overextending when opened
• Difficulty in maintaining the door's position
• Visible bending, cracking, or damage to the bracket

Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.