Parts for Kitchenaid KBSD706MPS00: Refrigerator Liner Parts

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

This replacement cover is the outer housing piece that protects internal components and provides a finished appearance to the appliance. Replacing a damaged or missing cover restores proper protection and helps prevent debris intrusion. What it does:

• Shields internal components from dust, lint and accidental contact
• Keeps wiring and connectors enclosed to reduce snag and wear risk
• Helps maintain proper airflow paths and cosmetic finish
• Commonly replaced when cracked, warped, broken or missing

• One replacement cover

• Disconnect power to the appliance before starting any repair
• Remove any adjacent panels or fasteners as needed to access the cover
• Handle clips and mounting tabs carefully to avoid breakage during removal/installation

This is a replacement mounting screw used to secure panels and components on compatible Whirlpool appliances. It restores proper fit and prevents parts from becoming loose or rattling during use. What it does:

• Fastens trim, brackets, or panels to appliance chassis
• Helps stop rattling or vibration caused by loose hardware
• Restores secure alignment of removable covers and assemblies
• Suitable when original screw is stripped, missing, or corroded

• One replacement mounting screw

• Disconnect power to the appliance before starting any repair
• Use the matching driver bit and thread engagement; avoid over-tightening
• Inspect surrounding threads and replace if damaged to ensure secure fit

This thermistor is the refrigerator's temperature sensor. It continuously measures compartment temperature and sends resistance signals to the control, helping the system regulate cooling for steady performance and consistent food preservation.

• Senses compartment air temperature through resistance changes
• Reports to the electronic control to regulate cooling components
• Failure can cause temperatures that are too warm or too cold
• May lead to extended run times, short cycling, or erratic temperature swings
• Some models display a sensor/thermistor error code

• Disconnect power before servicing and wear appropriate PPE.
• Match the original sensor location and wire routing; secure any clips or retainers.
• Ensure the connector is fully seated and wires are not pinched.
• Restore power and allow the refrigerator time to stabilize before evaluating temperatures.

This refrigerator air baffle is the internal vane that directs cold airflow from the freezer into the fresh food compartment. Replacing a broken or missing baffle helps restore even cooling and reduce random warm spots or items freezing near the vent.

• Directs and regulates airflow between freezer and refrigerator sections
• Helps maintain stable, even temperatures across shelves
• Diffuses direct cold air to minimize food freezing near the outlet
• Failure symptoms can include uneven cooling, weak airflow, cold spots, or rattling at the vent

• Disconnect power before service and wear cut-resistant gloves
• Access the interior vent/diffuser area; remove the cover or grille as needed
• Note the original baffle's orientation; seat the new baffle securely without obstructing the damper
• Reinstall covers, restore power, and allow temperatures to stabilize

This cover housing protects internal components and keeps the appliance looking finished. It restores a secure enclosure to prevent debris intrusion and minimize exposure to wiring and mechanical parts. What it does:

• Shields internal components and wiring from dust, moisture and physical contact
• Helps reduce noise from loose parts when the appliance is running
• Restores the appliance's finished appearance after service or damage
• Can be replaced if cracked, warped or missing to maintain safe operation

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; keep fasteners organized for reassembly
• Do not force-fit the cover; align tabs and screw holes before tightening
• If mounting points or clips are damaged, replace them to ensure a secure fit

The Thermistor is an OEM replacement part for Whirlpool refrigerators. This temperature-sensitive sensor monitors conditions inside refrigerator and freezer compartments. It provides critical feedback to the electronic control module, regulating cool air temperature in both sections.

Symptoms of a faulty thermistor include:

• Fluctuating temperatures where sections become too warm or cold  
• Frequent cycling of evaporator fans and cooling components
• Defrost issues or Er/Ed error codes shown on displays

Causes can involve regular exposure to changing interior environments over many years. Mineral deposits accumulating may lead to sensor surfaces becoming insulated. Physical stress from overloading could potentially crack the thermistor over time as well. 

This OEM replacement part is compatible with some Kenmore Elite models too.

A genuine replacement screw used to secure appliance panels, brackets, and components so assemblies stay aligned and stable. Installs quickly with a screwdriver or driver bit to restore proper fit and reduce rattling. What it does:

• Secures panels, trim, brackets or internal components to keep parts properly aligned
• Prevents loose or vibrating panels that can cause noise or wear
• Holds mounting points that keep doors, seals, and assemblies operating correctly
• Replaces stripped, missing, or corroded fasteners that compromise fit

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or deform parts
• Keep removed hardware organized and replace like-for-like for best fit