Parts for Whirlpool WRS588FIHB06: Refrigerator Shelf Parts

This refrigerator pan cover assembly forms the shelf surface above a drawer and supports the drawer's movement. Replacing a damaged cover restores a level storage surface and smooth, reliable drawer alignment.

• Forms the flat shelf surface over a refrigerator drawer to securely hold items
• Supports and aligns the drawer so it opens and closes properly
• Restores stability if the original cover is cracked, bowed, or broken

• Disconnect power to the refrigerator before servicing
• Remove food items; slide out and remove the drawer beneath the cover
• Lift/tilt the damaged cover out; transfer any reusable components from the original cover if applicable
• Set the new cover in place and reinstall the drawer; verify smooth operation

This refrigerator pan trim finishes the front edge of the shelf/pan assembly and helps secure the glass above the drawers. Replacing a cracked or missing trim restores a clean look and proper support for everyday use.

• Attaches to the shelf or pan frame to create a finished front edge
• Helps retain and support the glass insert above the drawers
• Can improve drawer alignment when the original trim is cracked or loose
• Common symptoms: broken/cracked trim, loose or missing edge piece, glass not sitting flat

• Disconnect power and remove food items before servicing
• Slide the shelf assembly out and carefully lift out the glass
• Release locking tabs on the old trim; align and snap the new trim into place
• Reinstall the glass and shelf; verify smooth drawer operation

This humidity sensor housing holds and protects the fridge's humidity/control assembly, helping maintain proper humidity-sensing operation and reliable climate control. Designed to replace a cracked or damaged housing to restore proper sensor placement and protection. What it does:

• Secures and shields the humidity sensor and related control components
• Keeps the sensor correctly positioned for accurate humidity detection
• Prevents physical damage and moisture exposure to the sensor assembly
• Helps resolve symptoms like inaccurate humidity readings or loose sensor fit

• Disconnect power to the appliance before starting any repair
• Handle the humidity sensor carefully; remove and reinstall per manufacturer guidance
• Uses basic hand tools; refer to the service manual or OEM instructions for disassembly/reassembly steps
• Replace the affected components rather than reusing damaged parts

This pan cover assembly for the fresh food section forms the shelf above a refrigerator drawer, supporting the glass and guiding the bin so it slides smoothly—restoring strength and organization when the original is cracked or warped.

• Creates the shelf surface above drawer(s) and supports the glass insert
• Provides alignment/rails so drawer(s) open and close correctly
• Helps contain spills and separates the drawer compartment from the shelf area
• Replace if cracked, broken, bowed, or if drawers bind, won't close fully, or the glass won't sit flat

• Disconnect power and remove food from the work area
• Slide out drawer(s) and lift out the glass
• Transfer any reusable trims or controls from the old cover to the new one, if applicable
• Set the new cover level, reinstall the glass and drawer(s), and verify smooth operation

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Axle is an OEM part for Whirlpool refrigerators. It is the mechanism that supports and enables smooth extension of shelves and drawers on sliding tracks.

Causes of a bad slide axle can include normal wear to plastic bushings from constant shelf movement, or damage from sharp or heavy items that cause stress and premature failure.

Symptoms of a faulty slide axle include:

• Shelves or drawers that do not fully extend or retract
• Resistance felt while pulling shelves out
• Squeaking or grinding noises coming from sliding areas
• Shelves that do not stay securely in place once extended

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Crisper Drawer is an OEM replacement part for Whirlpool refrigerators. Used within the fresh food compartment, this crisper creates a specialized storage area for preserving fruits and vegetables longer. Its precise sliding mechanics and vapor-sealed design maintain optimal humidity for crisping foods while preventing moisture build-up.

Causes of a bad crisper drawer include damaged seals, broken rollers inhibiting opening/closing, or cracking reducing humidity control.

Symptoms of a bad crisper drawer include:

• Warped or stuck drawer movement  
• Moisture inside the refrigerator or on stored items
• Dried out or wilted produce due to improper humidity  
• Unpleasant odors from lack of proper sealing

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Kenmore models.

This replacement meat pan restores the refrigerator's deli drawer, giving you a dedicated space for meats and snacks while sliding smoothly on the existing rails. Replace cracked or missing pans to keep contents organized and contained.

• Provides a sliding storage drawer for meats and deli items in the fresh food compartment
• Fits into existing shelf rails for smooth access and organization
• Helps contain spills and prevent items from falling into lower areas
• Replace if the drawer is cracked, broken, warped, missing, or no longer slides/stays on its tracks

• Remove food from the drawer and slide the old pan straight out of the rails
• Inspect/clean the rails and check for bends before installing the new pan
• Transfer any removable trim or accessories from the old drawer, if present
• Align with the rails and slide in until fully seated; do not force

The Trim Panel is an OEM part for Whirlpool refrigerators. It provides an aesthetically pleasing facade that covers exterior refrigeration components and protects the insulation.  

Causes of a bad trim panel can include cracks, dents, or warping due to impacts over time. Normal wear and tear can also cause discoloration, chips, or peeling of protective coatings.

Symptoms of a bad trim panel include:

• Exposed insulation or refrigeration components behind damaged areas   
• Gaps that allow warm air to enter the refrigerator compartment
• Peeling or bubbling of protective coatings
• A trim panel that no longer attaches securely to the refrigerator

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore French door refrigerator models.

The Glass Shelf is an OEM part for Whirlpool refrigerators. The tempered glass shelf is designed to fit on the intended shelf tracks within the refrigerator compartment.

Causes of a bad glass shelf can include cracks or chips on the surface over time due to repeated impact or excess weight loads. The glass shelf could also become loose or unstable if the mounting clips or tracks become worn out.

Symptoms of a bad glass shelf include:

• Cracks, chips, or other visible damage to the glass surface
• The shelf rocking or wobbling excessively on the tracks
• Inability to properly mount or secure the shelf within the refrigerator

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.