Refrigerator Glide Line Mover Start Switch Parts

This replacement rail supports and guides a sliding component inside your appliance, helping drawers, shelves, or racks move smoothly and stay properly aligned. What it does:

• Provides a track for a drawer, shelf, or rack to slide in and out
• Helps keep the sliding component level and correctly aligned
• Reduces friction and binding during operation
• Common failure signs include sticking or uneven movement, tilting on one side, popping off the track, or visible cracks/broken tabs

• 1 rail

• Disconnect power before servicing; wear cut-resistant gloves around metal edges
• Remove the affected drawer/shelf/rack and the damaged rail
• Reuse existing screws/fasteners and transfer any clips or end caps from the old rail if applicable
• Secure firmly; test for smooth travel before reloading

This supporter, holder is the small interior bracket that secures its matching holder/assembly inside your refrigerator. Replace a cracked or missing support to restore a solid, level fit and keep the component from wobbling or dropping.

• Provides structural support for the designated holder/assembly inside the fresh food compartment
• Keeps the component aligned so shelves/covers/bins sit level and operate smoothly
• Direct replacement for a broken, warped, or missing support
• Typical symptoms include: holder won't stay attached, tilting or sagging, rattling when doors close, visible cracks or stripped tabs

• Disconnect power to the refrigerator before servicing
• Remove the item the support holds (such as the related shelf, cover, or bin)
• Release locking tabs and/or remove screws; transfer any reusable hardware
• Align and snap or screw the new support into place, then reinstall the component and verify a secure fit

This slide set replaces the right- and left-hand rails that guide and support a drawer or rack. It restores smooth, aligned movement so the assembly opens and closes easily without sticking, wobbling, or jumping off the track.

• Guides and stabilizes the drawer/rack on both sides for smooth travel
• Maintains alignment to reduce binding, uneven movement, and premature wear
• Replaces worn, bent, or broken slides that affect operation
• Common symptoms: sticking, rough/grinding movement, tilt or sag, popping off track, hard to open/close

• Disconnect power; shut off gas/water. Remove the drawer or rack before servicing.
• Note L/R orientation; remove old slides and reuse existing screws/brackets.
• Install new slides in the same positions; ensure they are fully seated and aligned.
• Test movement several times before returning the appliance to service; wear cut-resistant gloves.

The Refrigerator Door Switch is an essential component designed for your Samsung refrigerator. This genuine OEM part ensures that your fridge accurately detects when the door is open or closed, maintaining optimal temperature control. By reliably triggering the cooling system, it helps prevent energy loss and keeps your food fresh longer. The switch is compatible with a wide range of Samsung refrigerator models, ensuring a perfect fit and easy installation. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements and minimizing downtime for your appliance. Additionally, a properly functioning door switch can enhance the overall efficiency of your refrigerator, contributing to lower energy bills and a more sustainable household. Whether youGÇÖre replacing a faulty switch or upgrading your fridgeGÇÖs components, the Refrigerator Door Switch provides a dependable solution to restore your refrigerator's functionality and ensure a seamless user experience.

This capacitor is an electrical replacement part that helps restore reliable motor/compressor start and operation in compatible appliances. Replacing a failed capacitor can stop intermittent operation and reduce abnormal humming or failure-to-start issues. What it does:

• Provides the stored electrical charge needed for motor or compressor start-up and stable operation
• Commonly linked to symptoms like humming, repeated starting/stopping, slow or failed starts, or loss of function
• Stabilizes voltage to reduce stress on motor circuitry and improve run consistency
• Replaces a worn or failed capacitor to restore normal appliance electrical performance

• Disconnect power at the breaker or unplug the appliance before beginning any service
• Capacitors can hold a charge—discharge carefully
• Observe terminal orientation and wire placement; replace with identical specifications

The Drawer Slide Rail is an OEM part compatible with Whirlpool refrigerators. This rail provides a smooth sliding mechanism that allows access to drawers such as the vegetable or freezer storage drawers. 

Causes of a bad Drawer Slide Rail could include damage or wear over extended use. Drawer components depend on their slide rails functioning properly to open and close smoothly without jamming or catching.

Symptoms of a faulty Drawer Slide Rail include:

• Drawers that are difficult to open and close 
• Drawers that do not fully open or extend out 
• Excessive noise or vibration coming from drawers

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement rail mounts inside your appliance to support or retain a bin, drawer, rack, or shelf. Replacing a cracked or missing rail restores proper alignment, secure fit, and smooth operation.

• Supports and retains the mating bin, drawer, rack, or shelf in the correct position
• Helps keep components level and aligned to prevent binding, popping off, or spills
• Provides stable guidance or stop points so parts move and seat properly
• Typical symptoms: wobble or sagging, difficulty opening/closing, parts falling out, visible cracks or broken tabs on the rail

• Disconnect power before servicing; remove items from the affected area
• Remove the drawer/bin/rack, then release locking tabs or screws to take out the damaged rail
• Transfer any reusable clips or end caps from the old rail, align, and secure the new rail; test movement before reloading

A replacement crisper drawer front panel that restores the appearance and proper closure of the refrigerator crisper compartment. Replaces a cracked, chipped, or damaged front to help the drawer sit and seal correctly. What it does:

• Replaces the damaged or worn front panel on the crisper drawer to restore fit and finish.
• Supports the crisper bin and helps the drawer slide and seat correctly in the cabinet.
• Helps reduce drafts and keeps produce contained when the original front is cracked or warped.
• Restores the refrigerator's interior appearance and eliminates cosmetic damage.

• Always unplug or switch off the refrigerator before beginning any repair.
• Remove food and the crisper drawer before installation; support shelves or components as needed.
• Basic hand tools (screwdriver) may be required; reuse existing screws/clips unless replacement hardware is specified.

This outer drawer slide supports and guides a refrigerator drawer or pantry pan so it opens and closes smoothly. Replacing a worn or cracked slide restores alignment and helps prevent sticking, tipping, or spills.

• Attaches as the outer rail for the sliding drawer assembly
• Provides smooth gliding action and supports the drawer/pan
• Helps keep the drawer level and properly aligned
• Common symptoms: drawer hard to move, tilts or falls, cracked/broken rail, scraping or binding

• Disconnect power; empty and remove the affected drawer
• Remove the shelf/cover if needed to access the slide
• Take out mounting screws/clips; note the slide's orientation
• Install the new slide, ensure rails are parallel, and test drawer travel

This crisper support post mounts to the refrigerator liner and supports the crisper cover/frame so the drawers stay level and slide smoothly. Replacing a broken or missing post restores proper support and alignment for the crisper area.

• Provides structural support for the crisper cover/frame
• Helps keep the cover level to prevent sagging or interference with drawers
• Replace when the post is cracked, loose, or missing
• Symptoms can include drawer binding or scraping, a tilted/uneven cover, or visible damage to the support

• Unplug the refrigerator and clear the crisper area for safe access
• Remove the crisper drawers and cover/frame
• Remove the damaged post and install the new post in the same location and orientation (attachment method varies by model)
• Reinstall the cover and drawers; confirm the cover is level and drawers glide smoothly

Kit was recently redesigned by manufacturer. Instructions included.

This door-activated light switch installs in the refrigerator liner and opens or closes the circuit to the interior lamp as the door moves. It restores reliable, automatic on/off lighting when you open and close the door. What it does:

• Controls the interior light based on door position
• Helps fix a light that won't turn on with the door open
• Helps fix a light that stays on when the door is closed
• On some models, also signals door-ajar/dispenser interlock functions

• 1 light/lamp switch

• Disconnect power to the refrigerator before servicing
• The switch is typically in the door jamb; gently release and pull it out, then transfer wires one at a time to the new switch
• Match wire positions/orientation and seat the switch flush to prevent air leaks
• Test door operation and light before finalizing reassembly

This track pan replaces the damaged or worn snack/deli drawer pan so food stays contained and organized inside the refrigerator. It restores proper sliding and helps prevent spills and food contamination. What it does:

• Provides a shallow sliding pan for deli, snack or small-item storage
• Supports smooth in-and-out sliding of the drawer and helps keep contents contained
• Replaces cracked, warped, or broken pans that cause sticking or spills
• Helps maintain an organized refrigerator interior and makes cleaning easier

• One track pan

• Disconnect power to the appliance before beginning any work
• Empty and remove the existing drawer and pan before installing the replacement
• Slide the new pan into the same track position until it seats; verify smooth operation
• If the track or mounting hardware is damaged, replace those parts as well.

This assembly mounts on the refrigerator compressor and combines the PTC start relay with a thermal overload protector. It helps the compressor start reliably and cuts power if overheating occurs to protect the motor and maintain cooling performance.

• Supplies initial start current to the compressor via the PTC relay
• Opens on overcurrent/overheat to prevent compressor damage
• Common failure symptoms: compressor won't start, repeated clicking/buzzing from compressor area, warm refrigerator/freezer, short cycling
• Useful when the original start device is burned, cracked, or rattles when shaken

• Disconnect power and allow the compressor area to cool before servicing
• Remove the terminal cover, note wire locations, and pull off the old start device
• Push the new start device fully onto the compressor pins and reconnect wires per the wiring diagram
• If your model uses a run capacitor, transfer/reconnect it as directed and reinstall the cover before restoring power

This evaporator fan blade mounts on the fan motor and circulates cold air across the evaporator coils and throughout the compartments. Replacing a cracked, warped, or loose blade restores proper airflow and stable temperatures.

• Moves air across the evaporator to distribute cooled air evenly
• Helps maintain consistent refrigerator and freezer temperatures
• Common symptoms include weak or no airflow, warm spots, frost buildup on the evaporator cover, and rattling/scraping noises
• Replace if the blade is damaged or spins loosely on the motor shaft

• Disconnect power before servicing
• Remove shelves/bins and the rear evaporator cover to access the fan
• Note blade orientation and seating depth; pull the old blade straight off the motor shaft
• Press the new blade on until fully seated; verify free spin and proper clearance before reassembly

This PTC compressor start relay briefly powers the compressor's start winding to get the motor turning, then drops out as it warms. Replacing a weak relay can restore consistent compressor starts and stabilize refrigerator and freezer temperatures.

• Momentarily energizes the compressor's start winding; disengages automatically as the PTC element heats
• Helps protect the compressor by removing the start winding after startup
• Symptoms of failure can include compressor clicking but not running
• Intermittent cooling or warming temperatures between cycles
• Heat discoloration or a burnt odor around the start device

• Disconnect power and remove the rear lower access panel
• Note wire locations; remove the start device cover/retainer and pull the old relay straight off the compressor pins
• Inspect compressor pins; firmly seat the new relay and reconnect wiring
• Reinstall covers/panels, restore power, and verify normal compressor start