Washer Line Hook Line Mover Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10814230
Washer won't agitate or spin after opening the lid? A faulty lid cam prevents the switch from engaging. Easy 15-minute DIY fix restores operation.
Do-It-Yourself Stories from Customers like You
Lid switch was not turning on, washer filled but didn't wash spin etc George J. • Hopewell , IL • March 02, 2020
I replaced the switch, the plunger, plunger guide and the lid cam, but the cam still didn't turn on the switch. Turned out someone had stood on the washer and bent the lid slightly, not enough to notice, but since I had ruled out just about everything else I started looking at the lid itself. I ended up bending it back close to it's original shape and now it works fine. I guess I learned a few things about washing machines though. One lesson is when you pull off the controls, the hose leading...
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Frigidaire part
By: Frigidaire
Part Number: 134629900
Fix a washer that won't start or run because the door won't lock. This door lock assembly secures the door during wash cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Washer door lock and latch James J. • Ararat , VA • March 12, 2016
Ordered new parts from appliancepartspris.com
Read more
More
$112.63
- Compare At:
-
$134.03
- You Save:
-
$21.40
Genuine Frigidaire part
By: Frigidaire
Part Number: 137353300
Washer won't start or shows door lock error? This door lock assembly secures the lid and signals the control. Most DIYers replace in under 20 minutes.
Do-It-Yourself Stories from Customers like You
Our washer was randomly stopping, in some not all cycles with weight on the lid some cycles could finish. Michael H. • Reading , PA • March 28, 2022
Replacing the cycle switch and the lid switch, resolved the issues! Our washer operates like new again. From receipt of the parts to the first wash. The replacement of the parts took less than 20 minutes! Savings over the purchase of a new washer dryer combo: $1700-2200!
Read more
More
$79.95
- Compare At:
-
$95.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003804
Washer won't spin or stops mid-cycle? A faulty lid switch prevents operation when the lid is bumped or opened. Simple snap-in replacement restores cycles.
Do-It-Yourself Stories from Customers like You
Washer didn't spin during spin cycle Ronney S. • Miami , FL • February 09, 2017
I had removed three screws behind the control board cover of the washer, to access the old lid switch. I checked the continuety of the of the switch with a multimeter and it obviously failed the the test by displaying infinity of <1, rather than being 0. I removed the old switch with a flathead screw driver, I tested the new one and installed it in no time. Problem solved!!!
Read more
More
$52.95
- Compare At:
-
$63.01
- You Save:
-
$10.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10184148
Washer only fills with hot water or stops mid-cycle? The water temperature switch controls incoming water temps for proper cycle selection. DIY repair.
Do-It-Yourself Stories from Customers like You
Washer would not let cold water into the machine. Jim J. • Prosser , WA • March 12, 2014
I tested the Atc. mid level switch, with my multi tester and found it was not sending enough current to the cold water inlet valve, so it would not open and let cold water in. I replaced the switch, (it was a snap) literally it snapped in place. replace the front face and turned the water back on and plugged in the washer, and turned it on. It worked perfect and has been since. good and easy repair even for a novice like me..
Read more
More
$79.95
- Compare At:
-
$95.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285518
Fix a washer that won't advance through cycles or gets stuck between wash and rinse. This cycle switch controls your wash sequence. DIY repair.
Do-It-Yourself Stories from Customers like You
Only hot water no matter what setting Jane D. • Newport , RI • June 23, 2025
Ordered the right part, took the back off the top control panel, and popped it in.
Read more
More
$77.71
- Compare At:
-
$92.47
- You Save:
-
$14.76
Genuine Frigidaire part
By: Frigidaire
Part Number: 134936800
If your washer won't start or the lid won't unlock, the lid lock switch may have failed. This DIY repair typically takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
The locking mechanism would not release the lid had to break it to open Dennis H. • Bridgeton , NC • January 10, 2015
1) Ordered part.
2) Removed front panel by loosening the two screws at the bottom front.
3) Removed old Safety Switch/Lid Lock by disconnecting wires (plug and 2 female disconnects)
4) Reconnected all wires and reinstalled switch.
5) Replaced front panel.
6) Tested Unit.
7) FYI - I found that the locking mechanism stays locked until cycle completely finishes on its own. DO NOT force the cycle to end. Lid will NOT unlock.
Read more
More
$76.95
- Compare At:
-
$92.34
- You Save:
-
$15.39
Genuine Samsung part
By: Samsung
Part Number: DC96-01703B
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Samsung washer was getting stuck on 7 minutes and making lots of noise while spinning. Chris C. • Rocky Point , NY • September 01, 2017
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub.
Read more
More
$81.95
- Compare At:
-
$97.52
- You Save:
-
$15.57
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600
Dryer won't start or stops mid-cycle? This door switch signals when the door is closed, restoring reliable starts. Moderate DIY repair with video guide.
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006900
Pedestal drawer won't stay closed? This door strike engages the latch to keep the drawer securely shut. Simple DIY fix takes about 15 minutes to install.
Do-It-Yourself Stories from Customers like You
The electrolux pedestal drawer would not latch and stay closed. Paul N. • Dover , MA • December 08, 2017
Went on line to Appliance Parts Pros Brought up the parts diagram located the new latch and prong for the drawer.
My new parts arrived in 2 days installed the parts put the drawer assembly back together closed the drawer all all is fine.
I have another pedestal drawer under the washer all the same age so I ordered a spare fully knowing I will need it sooner or later.
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Speedqueen part
By: Speedqueen
Part Number: 203573
Fix a washer lid that won't latch or lock during cycles with this lid lock catch assembly. Simple DIY repair requiring basic tools and screwdriver.
Do-It-Yourself Stories from Customers like You
The top of my speed queen had rushed really badly it was staining my clothes Sue T. • Wilmington , NC • February 28, 2026
My son-in -law replaced the entire lid and top along with the lid lock and safety lock on the lid. He has pictures of the process
Read more
More
$22.06
- Compare At:
-
$23.45
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820051
Fix washer overfilling or won't fill issues with a new water level pressure switch. Prevents flooding and restores proper fill cycles. 10-minute DIY repair.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overflowed and flooded the basement Tyler H. • Gardner , KS • February 27, 2016
Replaced the water-level switch and hose. Washer works again, no overflowing since!
Read more
More
$103.50
- Compare At:
-
$123.16
- You Save:
-
$19.66
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339334
Fix a washer that won't fill properly or overfills with this pressure switch. Controls water level sensing. DIY-friendly repair, about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Switch control water volume from small medium high was not function get stuck and not able to turn Ty L. • Gaithersburg , MD • August 10, 2014
After the part arrives, I was double check to make sure I got the right part. Importantly, unplug the electrical power first before do anything, also turn off the water hose for safety.
Then removed 4 screw out side panel and 2 screw in side to get lose.
After all, replaced a new part and put all panel and screw back together.
Finally, plug in electrical power then a water hose and test a new part just installed.
So far so good, seem like everything was function OK.
Again, thanks for your web...
Read more
More
$120.32
- Compare At:
-
$144.38
- You Save:
-
$24.06
Genuine Whirlpool part
By: Whirlpool
Part Number: W11252738
Fix a washer that won't spin or start due to a faulty door strike. This latch component ensures secure lid closure for proper operation. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Would not spin Heather G. • Morganton , NC • December 03, 2018
Replaced Latch
Read more
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002754
Fix a washer that won't start when the lid is closed with this lid switch plunger. Simple DIY repair—just remove two screws and realign. Video included.
Do-It-Yourself Stories from Customers like You
Lid switch was not turning on, washer filled but didn't wash spin etc George J. • Hopewell , IL • March 02, 2020
I replaced the switch, the plunger, plunger guide and the lid cam, but the cam still didn't turn on the switch. Turned out someone had stood on the washer and bent the lid slightly, not enough to notice, but since I had ruled out just about everything else I started looking at the lid itself. I ended up bending it back close to it's original shape and now it works fine. I guess I learned a few things about washing machines though. One lesson is when you pull off the controls, the hose leading...
Read more
More
$11.95
- Compare At:
-
$13.16
- You Save:
-
$1.21
Genuine Ge part
By: Ge
Part Number: WH12X10141
Fix a washer that won't agitate or spin with this lid switch. This safety part detects if the lid is closed. Easy DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
Washing machine would agitate but not spin Kevin T. • Overland Park , KS • January 27, 2020
Replaced lid switch and capacitor
Read more
More
$39.63
- Compare At:
-
$47.16
- You Save:
-
$7.53