Washer Cold Pump Hose Parts

This drain pump assembly removes wastewater from the tub during the drain and spin cycles, helping your washer empty quickly and complete cycles reliably. Replace a failing pump to fix standing water, aborted cycles, or drain-related error codes. What it does:

• Pumps water from the tub to the household drain during drain and spin
• Restores proper draining so cycles can finish as intended
• Common failure symptoms: no or slow draining, water left in tub, loud humming/grinding from the pump area, small leaks near the pump, or drain fault errors
• 100–127V, 60 Hz "yellow" variant per OEM specification

• One drain pump assembly

• Disconnect power and turn off water supply before servicing
• Expect residual water; place towels or a pan to catch spills
• Note hose and wire positions; transfer any mounting hardware from the old pump
• Inspect and clear the drain hose and tub-to-pump hose for blockages before testing for leaks

This replacement hose routes liquid or air between internal components, maintaining a secure, leak-resistant path. Replace a brittle, cracked, or clogged hose to prevent leaks and restore proper flow and sensing performance.

• Provides a sealed pathway between components such as the pump, tub, valve, drain path, or pressure system
• Helps maintain correct water flow or pressure/level sensing
• Common symptoms: leaks, kinks/cracks, standing water, slow/failed drain or fill, related error codes
• Restores reliable connections when used with properly seated clamps

• Disconnect power and shut off water supply before servicing; allow hot parts to cool
• Place towels or a shallow pan to catch residual water
• Note routing and clamp locations; transfer or replace clamps as needed and seat the hose fully on fittings
• Test for leaks with a short cycle and re-check all connections

This tub-to-pump hose connects the washer's outer tub to the drain pump, channeling water out during the drain cycle. Replacing a worn hose helps stop leaks and restore consistent draining when the original is cracked or deteriorated.

• Provides a sealed path from the outer tub to the drain pump during draining
• Helps the washer remove water at the end of wash and rinse cycles
• Common failure symptoms: water leaking at the front/bottom, puddles after a cycle, or slow/no drain
• Visual clues: cracks, splits, swelling, or soft spots in the hose rubber

• Unplug the washer and turn off water supply; expect residual water—use a pan/towels
• Access the hose per your model (often behind the lower front/service panel); note routing/orientation before removal
• Transfer and reuse the existing clamps; seat the hose fully on both fittings and secure evenly
• After reassembly, run a brief fill/drain test while watching for leaks

This drain hose extension kit increases the reach of your appliance's drain line so it can connect to a farther standpipe or sink, supporting proper drainage and reducing stress on fittings that can lead to leaks. What it does:

• Extends the existing drain hose to accommodate installations where the drain connection is farther away
• Helps maintain a secure, leak-resistant connection when routed correctly
• Useful when relocating the appliance, changing cabinetry, or updating plumbing
• Common signs you may need it: hose won't reach, kinks when stretched, or occasional water near the drain line

• One drain hose extension kit

• Disconnect power and shut off the water supply; have a towel or pan ready for residual water
• Join the extension to the existing drain hose with the proper coupling/clamps; tighten securely and avoid kinks or sharp bends
• Route and support the drain line per your model's installation guide and observe any maximum total hose length
• Run a short test cycle and check all joints for leaks

This drain pump assembly moves water out of the appliance during the drain portion of the cycle. Replacing a weak or failed pump restores proper draining and helps prevent standing water, odors, or repeated drain attempts.

• Actively pumps wastewater through the drain hose to household plumbing
• Engages during the drain step to clear the tub/sump between and after cycles
• Typical failure symptoms: won't drain or drains slowly; water left in the bottom; loud humming/grinding during drain; leaks around the pump area
• May fail due to worn motor, damaged impeller, or debris lodged inside the pump

• Disconnect power and turn off water supply; bail or wet-vac any standing water before starting
• Keep towels or a shallow pan ready; clamp or plug hoses to control residual water
• Transfer hose connections and any mounting hardware from the original pump; ensure seals and clamps are seated firmly
• After installation, run a short cycle to check for leaks

Size: 90 inches long. To order hose extension use 12001585. To order siphon break use 76660.

This drain hose carries wastewater from the washer's drain pump to your home standpipe or sink, ensuring proper draining and helping prevent leaks or backflow. Replace a cracked, kinked, or clogged hose to restore reliable draining.

• Provides a sealed path for wastewater from the drain pump to the household drain
• A damaged or clogged hose can cause leaks, slow draining, or drain-related error codes
• Kinks, splits, or pinholes may allow water to escape during drain cycles
• Loose or worn hose ends can lead to drips at the pump or rear connection

• Disconnect power and water supply; pull the appliance forward to access the hose
• Expect residual water—use towels or a shallow pan and clamp off the old hose if needed
• Note hose routing and clamp locations; reuse existing clamps and secure connections firmly
• Route the new hose without kinks and set the discharge height per your installation guide to prevent siphoning

This washer drain hose carries used water from the tub to your home drain. Replacing a cracked, clogged, or kinked hose helps restore proper draining and prevents leaks during the drain/spin portion of the cycle.

• Routes wastewater from the washer to the household standpipe or laundry sink
• Damage or blockage can cause leaks, slow or no draining, or water on the floor
• Replace if you see cracks, splits, bulges, or persistent leaking at the back of the washer
• A pinched or flattened hose can also lead to standing water after a cycle

• Unplug the washer and turn off water; place towels or a pan to catch residual water
• Note the routing; loosen clamps and remove the old hose from the washer outlet and drain connection
• Install the new hose and secure with clamps; avoid kinks or sharp bends
• Verify correct drain height/air gap to prevent siphoning, then run a drain/spin to check for leaks

This replacement hose routes water within your washer. Replacing a cracked, worn, or leaking hose restores a secure, watertight path so the machine can move water properly without puddles or performance issues.

• Transfers water between internal components during wash cycles
• Maintains a sealed flow path to help prevent leaks
• Damage may present as water on the floor, moisture under the unit, or related fill/drain errors
• Cracks, swelling, abrasion, or loose connections are common failure signs

• Unplug the washer and turn off water supply; have towels or a pan ready for residual water
• Note hose routing and clamp positions before removal; photos can help
• Transfer or replace clamps as needed; seat connections fully and secure firmly
• Run a test cycle and check all connections for leaks

This drain pump assembly removes wastewater from the washer during the drain and spin portions of the cycle. Replacing a weak or failed pump helps the washer finish cycles without standing water, odors, or error interruptions.

• Pumps water from the tub to the household drain during drain/spin
• Wet clothes at cycle end, or humming/grinding noises from the pump area
• Leaking around the pump or connections can indicate a cracked housing

• Disconnect power and shut off water supply before servicing
• Expect some water release; place towels or a shallow pan under the pump
• Transfer wires and hoses to the new pump in the same orientation; reuse existing clamps
• Inspect hoses/filters for obstructions and run a quick drain test to check for leaks

This flume hose kit replaces the flexible hose that routes water from the dispenser/fill flume into the washer tub. Restoring a tight, unobstructed hose helps prevent leaks and ensures detergents, bleach, and softener are carried into the wash.

• Directs fill/dispenser water from the flume to the tub during wash and rinse
• Restores proper flow so dispenser compartments empty correctly
• Helps prevent leaks caused by splits, brittleness, or loose connections
• Typical symptoms: water on the floor, dispenser not draining, weak flow into tub, musty odor near dispenser

• Disconnect power and shut off water supply before servicing
• Access the dispenser/flume area by removing the top or control panel per your model
• Note hose routing; transfer and secure clamps; avoid kinks and rub points
• Run a quick fill/rinse to check for leaks at both connections after installation

This inlet hose channels household water to the appliance's fill system. Replacing a worn or leaking hose restores proper water flow and helps protect floors and internal components from water damage.

• Directs water from the household supply to the unit's inlet/fill assembly
• Maintains a watertight path to prevent drips and leaks
• Replaces hoses that are cracked, swollen, kinked, or mineral-fouled
• Common symptoms: leaks at fittings or beneath the unit, slow or no fill, intermittent filling, or water-related error messages

• Disconnect power and turn off the water supply before servicing
• Place a towel or pan to catch residual water and relieve line pressure slowly
• Route the hose without kinks; ensure sealing surfaces and/or washers are clean and properly seated
• Secure connections per the OEM design (compression fitting or clamp); restore water and check carefully for leaks on the first run

This is the flexible drain hose that carries used water from the washer's pump to the household drain. Replacing a cracked or kinked hose helps prevent leaks and restores proper draining performance.

• Routes discharge water from the drain pump to the standpipe or laundry sink
• Leaks, cracks, bulges, or kinks can cause water on the floor or slow/no draining
• Loose connections at the hose ends may lead to intermittent leaks
• A collapsed or internally blocked hose can trigger drain errors or extended drain times

• Unplug the washer and turn off water; have towels or a pan ready for residual water
• Access the pump and hose; note routing before removal
• Transfer clamps and fittings from the old hose if required; ensure secure, leak-free connections
• Route the hose without sharp bends;

The Drain Pump is an OEM part for Frigidaire washing machines, crucial for removing used water from the machine at the end of each wash cycle. This pump ensures that water is efficiently expelled, allowing clothes to move to the spin cycle properly dried.  

Causes of a bad part can stem from blockages by small garments, coins, or debris within the pump or the drain hose, mechanical failure within the pump itself, or electrical issues preventing the pump from operating.  

Symptoms of a bad Drain Pump include:

• The washer not draining water, leaving clothes soaking wet after the cycle.
• A humming sound when the machine reaches the drain cycle, indicating the pump might be powered but blocked.
• Error codes displayed on the washer that signify draining issues.
• Water leakage from the bottom of the washer if the pump or its hoses are damaged.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Washer Filter Assembly is designed to maintain your Samsung washer's optimal performance. This genuine OEM part effectively traps debris and lint, preventing blockages and ensuring smooth water flow during wash cycles. By replacing your old or damaged filter with this assembly, you enhance your washerGÇÖs efficiency and extend its lifespan. Easy to install, the Washer Filter Assembly guarantees a secure fit and reliable operation. Compatible with a wide range of Samsung washer models, this genuine OEM part provides peace of mind knowing you are using a high-quality, manufacturer-approved component. Keep your laundry routine running smoothly with this essential replacement part.

The Washer Filter Assembly is an essential component for maintaining your Samsung washer's optimal performance. This genuine OEM part ensures a perfect fit and reliable functionality, specifically designed for Samsung washing machines. By effectively trapping lint, debris, and other particles, the filter assembly helps prevent blockages and enhances the efficiency of your washer. Installing this filter assembly is straightforward, allowing you to quickly restore your appliance's performance without hassle. Regular replacement with this genuine OEM part can extend the lifespan of your washer, reducing the need for costly repairs. Additionally, maintaining a clean filter assembly contributes to cleaner laundry results, providing a better washing experience. Compatible with a wide range of Samsung washer models, this washer filter assembly offers both quality and peace of mind. Choose the Washer Filter Assembly to ensure your Samsung washer operates smoothly and efficiently for years to come.