Washer Liquid Valve Parts
Genuine Lg part
By: Lg
Part Number: 5220FR2006H
The Water Inlet Valve Assembly is an OEM replacement part for LG washing machines, designed to control the flow of water into the laundry tub. This part is responsible for opening and closing to allow water into the wash drum at the appropriate times during the wash cycle, providing the correct water level and temperature.
Causes of a bad Water Inlet Valve Assembly can include mineral deposits blocking the valve, electrical failure preventing the valve from opening or closing properly, or physical damage to the valve mechanism itself.
Symptoms of a bad Water Inlet Valve Assembly include:
- Inadequate filling of the washer drum
- Water entering the drum when the washer is off
- Unusual noises during the fill cycle
- Water that is too hot or too cold, indicating a failure in valve operation that controls temperature
This OEM LG part can also be used on Kenmore/Sears appliances.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
-
Shuts off too soon
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg Bruce S. • Van Nuys , CA • December 13, 2015
Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward;
requires : 1 phillips screwdriver ~#2
1 needlenose plier, medium size
1 channel lock plier, medium size
1 marker pen
1 - cold water valve assembly # AP4445613
1 - hot water valve assembly #AP4441935
1 - water level pressure switch #AP4440713
an old towel or two for absorbing small amounts of water
a cellphone / camera for making sure you have the...
Read more
More
$48.44
- Compare At:
-
$59.79
- You Save:
-
$11.35
Genuine Whirlpool part
By: Whirlpool
Part Number: W11165546
The Valve is an OEM part for Whirlpool washing machines. This component controls the flow of water into the washing machine during the fill cycle, ensuring that the proper amount of water enters the machine based on the selected settings. The valve is crucial for regulating water levels and maintaining the efficiency and effectiveness of the washing process.
You should replace the valve if it becomes faulty or malfunctions. Causes of a bad valve can include regular wear and tear from frequent use, mineral buildup from hard water, or damage from electrical issues or surges. These problems can lead to the valve not opening or closing properly, which affects the machine's ability to fill with water.
Symptoms of a bad valve include:
- Washing machine not filling with water or filling slowly
- Washer overfilling or water leaking from the machine
- Inconsistent water levels during wash cycles
- Strange noises during the fill cycle
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The washer was not filling and displaying lf ("long fill") error code Kalen D. • Valparaiso , IN • February 08, 2019
I removed the top of the washer, disconnected the existing inlet valve assembly, and replaced it with the part I bought from AppliancePartsPros.com. If it hadn't taken me 30 minutes to figure out how to remove the top of the washer (not the entire top, just the cover over the control panel area), this would have been a 5 minute repair.
Read more
More
$66.30
- Compare At:
-
$79.88
- You Save:
-
$13.58
Genuine Whirlpool part
By: Whirlpool
Part Number: 285805
The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of hot and cold water into the washer. This component is crucial for starting the wash cycle, as it opens to allow water to enter and closes to stop the flow once the appropriate level is reached, ensuring efficient wash performance.
Causes of a bad Water Inlet Valve can include mineral deposits and sediment build-up, which can obstruct the flow of water, or mechanical failure such as a broken solenoid that prevents the valve from opening or closing properly.
Symptoms of a bad Water Inlet Valve include:
- Water not filling the tub at the beginning of the cycle
- Water leaking from the valve
- Washer not starting due to inability to fill
- Unusual noises from the valve area during operation
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
No hot or cold water
-
Will not stop filling with water
-
Will not fill with water
-
Fills and drains at the same time
See more...
Do-It-Yourself Stories from Customers like You
Water would leak into the tub after a wash load was finished also the hot water valve would make a loud buzzing noise before it turned on the water Robert B. • Robins , IA • January 23, 2015
I watched the how-to video on your website to learn how to get at the valve to replace it. Before watching the video, I did not know how to take the washer cabinet apart to replace the valve.
I searched on your website for my washer model, but the exact model number was not listed. I chose a very similar model number and looked up the info for that machine's replacement valve . It looked like it would work in my washing machine so I decided to take a chance and order the valve.
I placed my...
Read more
More
$31.37
- Compare At:
-
$37.64
- You Save:
-
$6.27
Genuine Ge part
By: Ge
Part Number: WH13X26637
The Water Inlet Valve is an OEM part for GE washing machines. It is responsible for controlling the entry of hot and cold water into the washing machine. This valve opens and closes at the appropriate times during the wash cycle to allow water to enter based on the selected temperature and wash settings.
Causes of a bad water inlet valve include mineral deposits from hard water, which can block the valve, and wear and tear from regular use, which can cause the valve to fail mechanically or electronically. Additionally, if the screens that filter the water before it enters the valve become clogged, water flow can be restricted, affecting the washing machine’s performance.
Symptoms of a malfunctioning water inlet valve include:
- The machine not filling with water.
- Water entering the machine slowly.
- Water leaking around the valve area.
- A noisy valve during operation.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water inlet shut off assembly Tim B. • Benton , PA • February 01, 2021
So this is a good one - a tale of outstanding technical and customer support, mingled with some ridiculous shipping fiascoes - read on! I called the tech team, who helped me to correctly diagnose that my constantly running cold water was caused by the shut-off assembly and not the board - great, as that is cheaper. Sincere thanks to the tech people! So I ordered the part, with expedited shipping. Amazingly it arrived the next day! But it was damaged in shipping as the warehouse has just stuffed...
Read more
More
$51.79
- Compare At:
-
$61.63
- You Save:
-
$9.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10144820
Water inlet valve assembly includes: Hot and cold inlet valves, thermistor, vacuum break and wiring harness.
The Water Inlet Valve Assembly is an OEM part for Whirlpool washing machines, designed to control the flow of hot and cold water into the washer. This component ensures that water enters the washing machine at the correct times during the wash cycle, filling the tub to the appropriate levels for efficient cleaning.
Causes for a Water Inlet Valve Assembly to fail include sediment buildup from hard water, which can block the valves, wear and tear on the solenoids over time, and electrical failures that prevent the valves from opening or closing properly.
Symptoms of a bad Water Inlet Valve Assembly include:
- The washing machine does not fill with water, or it fills very slowly.
- Water continues to drip into the tub even when the washer is off
- The washer fills with the wrong temperature of water
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Will not stop filling with water
-
No hot or cold water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Cold water wasn't coming into machine and cycle stalled when it reached "rinse " Barbara J. • Ronan , MT • July 23, 2018
Replacing the water inlet valve fixed the problem. For many months we noticed cold water was just dribbling into the washer during the rinse cycle, and "warm" washes were hot not warm. It seemed like the cold water wasn't able to enter the machine. Then one day the cycle just stopped when it reached "rinse" and wouldn't go any further.
I first tried solving it by cleaning the filter where the cold water hose enters the machine at the back. It was coated in sediment (the water comes from a...
Read more
More
$57.95
- Compare At:
-
$69.49
- You Save:
-
$11.54
Genuine Whirlpool part
By: Whirlpool
Part Number: W11210459
The Washer Water Inlet Valve is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer, opening and closing to allow the correct amount of hot and cold water into the machine during different stages of the wash cycle.
Causes of a bad water inlet valve can include wear and tear over time, sediment build-up, or damage from high water pressure. These issues can cause the valve to malfunction, leading to improper water levels or no water entering the machine at all.
Symptoms of a bad water inlet valve include:
- Washer not filling with water
- Slow fill or no water flow
- Water leaking from the valve area
- Inconsistent water temperature during cycles
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Lleaking hot water solenoid valve David G. • Decatur , GA • August 13, 2018
Replaced solenoid valve assembly. Easy repair.
Read more
More
$62.95
- Compare At:
-
$79.88
- You Save:
-
$16.93
Genuine Lg part
By: Lg
Part Number: AJU75152601
The Water Inlet Valve is an OEM replacement part specific to LG washing machines. It is an electronic solenoid valve located near the water supply inlet ports that controls the flow of water into the washer tub. The inlet valve precisely regulates water levels during different phases like filling, washing, rinsing, and spinning cycles.
Causes of a bad water inlet valve can include worn or faulty electronic components, mineral buildup obstructing valve movement, or damage to seals and diaphragms.
Symptoms of a bad water inlet valve include:
- Inability to properly fill the washer tub during cycles
- Water leaking or flooding from the valve area
- Erratic water temperature or varying fill levels between loads
- Cycles failing to advance due to inadequate or unregulated water flow
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Will not fill with water
-
Shuts off too soon
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
LG washing machine would not shut off cold water during rinse cycle Richard W. • Denton , TX • May 22, 2018
Conducted research on web, and via direct contact with AppliancePros where a diagnosis of replacing the water inlet valve and cleaning the sensor tube would "most probably" (80%) handle the issue. The remaining uncertainty would reside in the electronic board circuitry. The price of replacing the water inlet valve was half of a local repair call just to diagnose the issue so I decided to have faith in the odds presented to me. The part arrived on time, and using AppliancePros advice and...
Read more
More
$146.73
- Compare At:
-
$173.14
- You Save:
-
$26.41
Genuine Ge part
By: Ge
Part Number: WH13X26535
The Water Inlet Valve is an OEM part for GE washing machines. This crucial component is responsible for controlling the flow of water into the washer. It operates via electrical solenoids that open and close to admit hot and cold water based on the selected wash temperature and cycle.
Symptoms of a failing water inlet valve include:
- Washer not filling with water at the start of a cycle
- Water entering the machine very slowly or intermittently
- Water leakage around the valve area
Causes of water inlet valve failure typically include mineral deposits that can block the valve, wear and tear on the solenoids leading to malfunction, and leaks due to faulty seals or connections.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Washer was dripping water into the tub even when off Dennis T. • Kingwood , TX • January 24, 2026
After a few internet searches, it became clear that the most common fix for this issue is replacing the water inlet valve. My washer is about five years old, which aligns with the typical lifespan of these valves. I ordered the OEM parts for this washer, as this is not something you want failing and potentially flooding your home while you’re away.
The thermistor is installed directly into the valve and uses an O-ring that is known to degrade and leak over time. Since the thermistor has to be...
Read more
More
$31.95
- Compare At:
-
$38.36
- You Save:
-
$6.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182862
The Water Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer during the fill cycles, ensuring that the machine gets the correct amount of hot and cold water for washing and rinsing clothes. This valve is essential for the proper functioning of the washing machine.
You should replace the water valve if it becomes faulty. Causes of a bad water valve can include mineral buildup from hard water, electrical issues, or wear and tear from regular use. A malfunctioning valve can lead to issues such as inadequate water flow, leaking, or the washer not filling properly.
Symptoms of a bad water valve include:
- The washer not filling with water or filling slowly
- Water leaks around the valve area
- Inconsistent water temperature during fill cycles
- The washer not advancing through cycles due to improper water levels
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
No hot or cold water
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
F20 error code on whirlpool duet wfw9200sq00 Jason P. • Hercules , CA • May 13, 2017
I replaced the supply lines and mesh in-line filters. I made sure incoming water pressure was strong. I also cleared some debris from the internal drain filter down below. The F20 persisted.
My plan was to start swapping out parts from the inlet on. I ordered the valve and got it in a day.
Thanks to the schematics and videos on appliancepartspros.com, I was comfortable with the repair, and had confidence in my plan.
The actual valve replacement took about 10 minutes. Bingo bango...
Read more
More
$53.27
- Compare At:
-
$66.89
- You Save:
-
$13.62
Genuine Whirlpool part
By: Whirlpool
Part Number: W11220230
The Water Inlet Valve is an OEM component compatible with Whirlpool washing machines. This valve controls water flow into the tub by opening at predetermined points in the cycle. Proper water regulation is necessary for optimum cleaning performance.
Symptoms of a bad water inlet valve include:
- Slow or inconsistent filling during initial cycle phases
- Premature displays of out-of-balance errors due to low water levels
- Inoperable cycles missing crucial wash or rinse stages
Causes stem from mineral buildup obstructing valve ports over time. Mechanical failure could also prevent actuation from electrical commands sent by the control board.
This Whirlpool replacement valve restores accurate flow control. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking water Nick L. • Steubenville , OH • November 15, 2019
I had an authorized Whirlpool service tech come to look at problem diagnosed problem as water inlet valve leaking ordered the part. After 11 days I was told part was on backorder from Whirlpool. I ordered the part from you and received the next day and I installed it in approximately 20 minutes.
Read more
More
$93.22
- Compare At:
-
$110.00
- You Save:
-
$16.78
Genuine Ge part
By: Ge
Part Number: WH13X26534
The Water Inlet Valve Assembly is an OEM part for GE washing machines. It is responsible for regulating the flow of water into the washing machine during designated cycles. The water inlet valve opens and closes to allow water to enter the tub at the correct times and pressures. It works in coordination with other components to fill and drain the tub as needed.
Causes of a bad water inlet valve include corrosion, mineral buildup, or a malfunctioning solenoid or electronic component that controls the opening and closing mechanism.
Symptoms of a bad water inlet valve include:
- Inability to fill the tub with water
- Slow or delayed filling
- Leaks from the water supply area
- Intermittent or inconsistent water flow
- High water pressure readings
This GE part is also compatible with some Hotpoint, RCA, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water inlet valve had a steady leak, apparently had failed some time ago. James T. • Lady Lake , FL • March 07, 2021
Ordered new valve assembly, part arrived 2-3 days, installed part same day it arrived. Some difficulty getting to the two screws holding it in due to small area to work. Once that was figured out, reinstall went very smoothly, total time about one hour. Probably saved a couple of hundred if I had to hire a plumber to fix it, plus the parts. Very satisfied with the service.
Read more
More
$32.41
- Compare At:
-
$38.24
- You Save:
-
$5.83
Genuine Ge part
By: Ge
Part Number: WH23X10030
The Drain Pump is an OEM part for GE washing machines. It is responsible for removing water from the washer's tub at the end of each wash cycle, ensuring that your laundry is properly drained before the spin cycle. This pump helps to prevent water from sitting in the tub, which can lead to mold and mildew.
Symptoms of a bad Drain Pump include:
- Water not draining out of the washer, leading to stagnant water pooling in the tub.
- Unusual noises during the drain cycle, indicating a struggle or failure to operate.
- The washing machine stopping abruptly before or during the drain phase.
Causes of a bad drain pump can include blockages from small garments or debris, mechanical failure from wear and tear, or electrical issues that affect the pump's power supply.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water pump on washer went bad Joshua B. • Morrow , OH • March 19, 2017
I ordered a new pump on this website. They provided me with written directions as well as a video to follow along with on how to change the pump. As always it wasn't as easy as the video, but that was the mechanic no the tool! Great job on the service. Will order parts from here again.
Read more
More
$55.66
- Compare At:
-
$82.48
- You Save:
-
$26.82
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10683603
The Water Inlet Valve is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer, allowing it to fill with the correct amount of water during the wash and rinse cycles.
Over time, the water inlet valve can become clogged with debris, develop electrical issues, or wear out, leading to problems with the water flow. Causes of a bad water inlet valve include mineral buildup from hard water, internal component failure, or damage to the valve body.
Symptoms of a bad water inlet valve include:
- The washing machine not filling with water
- Slow or insufficient water flow into the washer
- The washer filling with water when it should not
- Unusual noises during the filling process
- Leaks around the valve area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The cold water side of the water valve on the washer was leaking into the tub after the machine had shut down Carlos P. • Okeechobee , FL • November 17, 2014
Ordered the valve body from Appliance Parts Pro. It was very easy to find the part on their website. Ordering was simple. The part actually got here the next day. I received an email about 2 hours after I received the part that contained the tracking number. That is what is known as quick and reliable service. Part was a little hard to replace since I have big hands. There are 2 metal screws that hold the valve body to the washer that are in a small confined area. Unless you want to dismantle...
Read more
More
$68.36
- Compare At:
-
$81.35
- You Save:
-
$12.99
Genuine Lg part
By: Lg
Part Number: 5220FR2008F
The Inlet Valve Assembly is an OEM part for LG washing machines. It controls the flow of water into the washing machine during different cycles, ensuring the correct amount of water enters the tub for optimal washing performance. The assembly includes solenoids that open and close the valve based on signals from the washing machine’s control board.
You should replace this inlet valve assembly if it becomes faulty or damaged. Causes of a bad inlet valve assembly can include mineral buildup from hard water, electrical faults, or wear and tear from regular use. A malfunctioning valve can lead to issues with water flow, affecting the machine’s washing efficiency.
Symptoms of a bad inlet valve assembly include:
- No water entering the washing machine
- Water entering too slowly or at an inconsistent rate
- The washing machine not filling properly
- Water leaks from the valve area
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg Bruce S. • Van Nuys , CA • December 13, 2015
Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward;
requires : 1 phillips screwdriver ~#2
1 needlenose plier, medium size
1 channel lock plier, medium size
1 marker pen
1 - cold water valve assembly # AP4445613
1 - hot water valve assembly #AP4441935
1 - water level pressure switch #AP4440713
an old towel or two for absorbing small amounts of water
a cellphone / camera for making sure you have the...
Read more
More
$118.30
- Compare At:
-
$140.78
- You Save:
-
$22.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181694
The Inlet Valve is an OEM part for Whirlpool washing machines. This valve is critical for controlling the flow of water into the washing machine, ensuring that the right amount of water is supplied for various washing cycles. It consists of solenoids that open and close to allow hot and cold water to enter the wash tub at the appropriate times, according to the selected wash settings.
Symptoms of a failing Inlet Valve include:
- The washing machine not filling with water at the start of a cycle
- Water entering the machine slowly or intermittently
- The machine overfilling or underfilling
- Unusual noises coming from the valve area during the filling stage
- Leakage around the valve
Causes of a bad inlet valve can include mineral deposits from hard water which can clog or block the valve, wear and tear on the solenoids over time leading to failure to open or close properly, and electrical failures that affect the operation of the solenoids.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
No hot or cold water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Hot water slowly dripped into washer tub (1 gallon in a couple of days) Robert M. • Northridge , CA • July 28, 2014
I unplugged the machine. I removed the two fill hoses. I removed the top of the washer case by removing 3 tamper proof screws from the back ( I used my set of "star" head drivers), sliding the top back 1 inch and lifting the top off. I marked the 4 wires with 1 thru 4 stripes with a marker for ID, then pulled the 4 wires off the landing terminals. I removed the mounting screw and lifted the valve up as far as the hose permitted to get a better grip on the valve and hose. I removed the...
Read more
More
$57.22
- Compare At:
-
$67.52
- You Save:
-
$10.30
Genuine Samsung part
By: Samsung
Part Number: DC97-15459G
The Washing Machine Water Inlet Valve is essential for regulating the water flow into your Samsung washer. This genuine OEM part ensures precise control, allowing your appliance to fill with the exact amount of water needed for each wash cycle. Designed specifically for Samsung washing machines, it guarantees a perfect fit and reliable performance. The durable construction of this water inlet valve provides long-lasting use, minimizing the need for frequent replacements and saving you time and money. By replacing a faulty valve with the Washing Machine Water Inlet Valve , you can resolve common issues such as water not filling, leaking, or inconsistent water levels. Easy to install, this part helps restore your washerGÇÖs functionality quickly, ensuring your laundry runs smoothly and efficiently. Trust in the quality and compatibility of this genuine OEM part to maintain your Samsung washerGÇÖs optimal performance and enhance your overall washing experience.
Do-It-Yourself Stories from Customers like You
Error code nf not filling Gerald E. • Edmond , OK • June 20, 2016
Researched error code and symptoms on Internet. Disassembled washer back to get right part #, be careful they are different!
Googled part # for OEM part, found AppliancePartsPros with competitive pricing and fast delivery, placed order on Wednesday, had it on Friday for a few bucks more.
Got the part as expected, replaced, tested and success! No error code, fast wash cycle, happy better half!
Read more
More
$115.64
- Compare At:
-
$136.46
- You Save:
-
$20.82