Jb900wd1ww Screw Ap2633430 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Ge part
By: Ge
Part Number: WB44T10011
The Bake Element is an OEM part for GE ovens, designed to provide the heat necessary for baking. This element is located at the bottom of the oven cavity and heats up when electricity is applied, converting electrical energy into heat to cook food evenly.
Over time, however, the bake element can wear out or become damaged.
Symptoms of a bad Bake Element include:
- Visible signs of wear or damage, such as blistering, cracks, or breaks in the element.
- A burnt out element that no longer glows red or heats up.
- Food not baking evenly or thoroughly.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Oven bake element malfunction Fred H. • Dacula , GA • March 19, 2014
Watched AppliancePartsPros.com instruction video.
Ordered new oven bake element, which arrived a couple days later.
Removed old oven bake elelment.
Installed new oven bake element.
I am very appreciative of the instructional video. It's a very handy way for me to figure out if it's a do-it-yourself repair or not. In this case, another key thing it pointed out was the fact that the two wires that attach to the oven bake element have a tendency to slip back into the insulation behind the...
Read more
More
$53.80
- Compare At:
-
$83.29
- You Save:
-
$29.49
Genuine Ge part
By: Ge
Part Number: WB21X22134
The Oven Temperature Sensor Assembly is an OEM replacement part for GE electric wall ovens. It is responsible for accurately reading the oven's internal temperature to provide precise temperature control and safe operation. Consistent and precise temperature readings are necessary for repeatable cooking results.
Symptoms of a bad temperature sensor include:
- Inability to reach or maintain set cooking temperatures
- Fluctuating temperatures causing inconsistent results
- Error codes or fault messages related to temperature regulation
- Potential safety concerns if temperatures run too high or low
Causes of a faulty sensor can be due to failures over extended usage, exposure to high heat cycles, or impedance changes due to dirt or mineral deposits. Precise temperature readings allow for confident cooking.
This OEM GE replacement sensor is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models.
This part fixes the following symptoms
-
Oven is too hot
-
Won't start
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Oven would not come to full temperature; unreliable heating; heating elements apparently ok. Stewart W. • Silver Spring , MD • May 07, 2022
My mother's GE range was not coming up to full heat (very far from it), and I was hearing a lot of relay-clicking coming from the control board. The heating elements seemed good. I suspected the control board was faulty, but there was a chance that it might be the (*much* less expensive) temperature sensor, so I ordered both from AppliancePartsPros.com (which got the parts to me very fast) so I could try the T-sensor first. After removing the doors and the back panel of the oven, and taking out...
Read more
More
$15.26
- Compare At:
-
$21.22
- You Save:
-
$5.96
Genuine Ge part
By: Ge
Part Number: PM10X310
Cerama Bryte Cooktop Cleaner is a special cleaner designed specifically for ceramic glass and smooth-top cooking surfaces. It easily removes cooked-on foods, spills, or grease while leaving your cooktop looking like new. This product contains no abrasives or harsh chemicals, so it won’t scratch or damage your delicate cooktop surface.
To use the cleaner effectively, all you need to do is spray it onto the surface and then scrub it with a clean damp cloth. Use circular motions for best results. The product can also be used to remove baked-on foods from grates and drip pans on your stovetop. For tougher stains, let the cleaner sit for a few minutes before wiping it away.
Do-It-Yourself Stories from Customers like You
Cooktop on my kitchenaid slide in range shattered word to wise don't place your pot tops face don on the stove the top formed a vacuum with the top and as the top cooled the vacuum increased to th Marc L. • North Branford , CT • May 16, 2016
VERY simple fix- you do not even have to pull the range out.. I ordered a new cooktop from Appliance parts Pros. The customer sales rep Alphonso was great and walked me through the general process. I could find no explicit instructions for the repair but I muddled my way through. The fix is simple on Kitchenaid/Whirpool slide in ranges. 1. Open the oven door and remove the two phillips head screws directly below the control panel that hold the panel down.2. Lift the control panel upward and...
Read more
More
$14.78
- Compare At:
-
$17.44
- You Save:
-
$2.66
Genuine Ge part
By: Ge
Part Number: WB30T10099
The Radiant Element is an OEM part for GE ranges and cooktops. This part provides efficient and even heating for cooking. This part uses electricity to heat up and transfer warmth directly to the cookware. The radiant element is encased under the glass surface of the cooktop, offering a sleek and easy-to-clean cooking area while ensuring optimal heat distribution and cooking performance.
Causes of failure might include a burnt-out heating coil, damage to the element's electrical connections, or a malfunction within the control system that regulates power to the element.
Symptoms of a bad Radiant Element include:
- The element not heating up, leading to insufficient cooking temperatures.
- Uneven heating, causing inconsistent cooking results.
- The cooktop surface not responding or only partially heating, indicating a possible failure in the element's circuit.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Large dual burner Frederick E. • Athens , AL • September 19, 2014
Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails.
My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because...
Read more
More
$109.46
- Compare At:
-
$142.70
- You Save:
-
$33.24
Genuine Ge part
By: Ge
Part Number: WB04T10022
The Oven Door Seal is an OEM part for GE ovens. This seal prevents heat from escaping during cooking, ensuring that the oven maintains a consistent temperature for efficient and even cooking.
A compromised Oven Door Seal can result from several factors, including normal wear and tear from regular use, exposure to high temperatures that degrade the material over time, or accidental damage such as tears or cuts.
Symptoms of a failing Oven Door Seal include:
- Visible wear or damage to the seal
- Heat escaping from the oven door during use
- An increase in cooking times or uneven cooking results
- A noticeable increase in energy consumption as the oven works harder to maintain temperatures
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Fire in oven and had to change the gasket on the door Sandra G. • Traverse City , MI • April 18, 2015
Looked at YouTube, took it off and figured out which one it was and ordered one from AppliancePartsPros.com. It was very easy. Just tucked the ends in with a screwdriver. Delivery from Appliance Parts was easy and fast.
Read more
More
$69.95
- Compare At:
-
$82.54
- You Save:
-
$12.59
Genuine Ge part
By: Ge
Part Number: WB36X192
The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.
Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.
Symptoms of a bad Oven Light Lens include:
- Diminished light output, making it hard to see inside the oven
- Cracks or damage to the lens itself
- Discoloration or cloudiness that cannot be cleaned off
- The lens becoming loose or falling off
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service...
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Ge part
By: Ge
Part Number: WB07X42948
The Bottom Trim Channel is an OEM part for GE electric ranges. As an essential cosmetic component, it works to cover and seamlessly conceal the area along the bottom perimeter of the range.
Causes of a faulty trim channel can include damage from impact or abrasion, degradation of material finishes from repeated cleaning, or loose fittings from normal stresses of use over time.
Symptoms include:
- Gaps visible between the channel and appliance bottom
- Scuffs, cracks, or breaks in the trim piece surface
- Loose or improper positioning of channel attachment clips
Color: White
This GE replacement restores a sleek, professional look while protecting internal components from spills and debris ingress. Compatible with Hotpoint, RCA, and select Kenmore models as well, it prevents future repairs from minor aesthetic issues. Keep your range looking its best!
Do-It-Yourself Stories from Customers like You
Shattered oven door glass Martin D. • Newton , NJ • September 21, 2014
With the help of Ms.Kelly Hunt, AppliancePartsPros.com, I was able to locate the correct parts.
It took approx. 30 minutes to remove the door and replace the shattered glass and bottom door trim. I wouldn`t hesitate to use this service for future use.The staff is friendly, helpful , knowledgeable and delivery is very fast.
Thank you
Martin Dobbins
Read more
More
$14.72
- Compare At:
-
$17.52
- You Save:
-
$2.80
Genuine Ge part
By: Ge
Part Number: WB02X33180
The Rear Door Support is an OEM replacement part for GE ranges. Located at the base of the range, this bracket provides weight-bearing support for the lower oven drawer. It facilitates smooth extension and retraction of the drawer.
Causes of faulty support can include cracks or fractures developing over extended use, worn joints unable to sustain drawer weight, or misalignment from repeated opening/closing stress.
Symptoms of a bad support include:
- Loose or sagging lower oven drawer
- Grinding or binding noises when operating the drawer
- Difficulty fully extending or retracting the drawer
- The drawer not sitting securely in a closed position
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges.
Do-It-Yourself Stories from Customers like You
Rear supports missing from bottom stove storage drawer Tim H. • West Boylston , MA • September 18, 2015
So, in the process of a kitchen remodel my GC managed to lose *both* of the rear plastic supports for my GE stove! The drawer was totally unsupported without the brackets. I managed to find them on your site and see that they were a new and better design (rear mount with screw vs side mount and no firm mounting). The install was a snap and the brackets work excellent. I wish I knew that there was a new design years ago or I would have bought them much sooner! Thanks!!
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB44T10053
The Element Convx is an OEM part for GE ovens. This convection element is designed to provide consistent and even heat distribution within the oven, ensuring optimal cooking and baking results. It typically works in conjunction with the convection fan to circulate hot air evenly throughout the oven cavity.
Causes of a bad convection element can include regular wear and tear, electrical surges, or damage from physical impact. A malfunctioning element can lead to uneven cooking, longer preheating times, and overall reduced oven performance.
Symptoms of a bad convection element include:
- Uneven cooking or baking results
- The oven not reaching the set temperature
- Longer than usual preheating times
- The convection fan operating without generating heat
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Convection oven did not heat Wilbur G. • Apple Valley , CA • June 10, 2016
I visited Appliance Pros website and indicated the problem we were having etc. Found the suspected part (heating element), went on YouTube and found out how to remove the part from the oven and test it with a multi-meter. Keep in mind I have never used a multi-meter before or made repairs to an oven before. However, I have used Appliance Pros before to fix a refrigerator problem just a month earlier and after watching their video it was a very easy repair. Anyway, I tested the old convection...
Read more
More
$72.39
- Compare At:
-
$86.14
- You Save:
-
$13.75
Genuine Ge part
By: Ge
Part Number: WB24T10063
The Infinite Control Switch is an OEM replacement part for GE electric stoves. This component acts as the main selector switch for a Dual Coil Element stove to function in different modes and settings.
Symptoms of a bad infinite control switch include:
- Difficulty selecting or functioning in certain cooking modes or programs
- Stove burners or ovens not igniting or heating as selected
- Controls flickering, blinking, or becoming unresponsive
Causes of a bad control switch can be normal wear from frequent use over time, loose connections from vibration, or potential spills that cause internal damage.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore electric stove models.
Do-It-Yourself Stories from Customers like You
Burner only worked on high setting Alejandro G. • East Meadow , NY • February 15, 2016
Ordered recommended part for GE appliance. Change was very simple. Followed instructions on video and removed one wire at a time. Very easy to change 5 to 10 minutes.
Read more
More
$80.95
- Compare At:
-
$95.52
- You Save:
-
$14.57
Genuine Ge part
By: Ge
Part Number: WB55T10067
The Oven Door Window Pack Assembly is an OEM part for GE ovens. This assembly includes the glass window and necessary components to ensure a clear view into the oven while maintaining the internal temperature and providing insulation. The glass measures 19" x 12".
Causes of a bad window pack can include thermal stress from repeated heating and cooling cycles, physical impacts causing cracks or breaks, or seal failure leading to fogging or heat loss.
Symptoms of a bad window pack assembly include:
- Visible cracks or chips in the glass
- Fogging or condensation between glass layers
- Heat escaping from the oven door
- Difficulty seeing into the oven during cooking
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Inner glass broken on stove Wayne M. • Gulfport , MS • October 19, 2014
The glass was easily replaced. Just a few screws to remove cover then remove bad glass then i dropped in the replacement glass then reinstalled cover. Ithen put the door back in the stove. 15 minute job!!! I was so surprised to see how easy it was!!! Thanks! Part fit perfectly!!!
Read more
More
$220.60
- Compare At:
-
$262.51
- You Save:
-
$41.91
Genuine Ge part
By: Ge
Part Number: WB08T10026
The Receptacle Push-In is an OEM replacement part for GE ranges. This component securely holds the electrical receptacle/plug in place on the back of the range. Proper functioning of the receptacle push-in allows for a stable electrical connection and safe cord positioning.
Causes of a bad receptacle push-in include normal wear over time, bending/stress on the receptacle area, or damage affecting its securing ability.
Symptoms of a bad receptacle push-in are:
- Loose or wobbly electrical plug connection
- Exposed wiring or fragile cord positioning
- Tripped breakers or recurring electrical issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Wire connecting from strove to light fixture sparked out Joanne C. • Hudson , FL • October 30, 2015
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now.
Would definitely call again if I needed assistance.
Read more
More
$7.45
- Compare At:
-
$8.36
- You Save:
-
$0.91
Genuine Ge part
By: Ge
Part Number: WB30X44826
The Medium Haliant Element is an OEM part for GE cooktops. This radiant heating element is located beneath the ceramic cooktop surface and provides a medium-sized heating area for cooking various dishes. This element measures 6 Inches.
Causes of a bad haliant element can include electrical issues such as short circuits, wear and tear from regular use, or physical damage from impacts or overheating.
Symptoms of a bad medium haliant element include:
- The element not heating up or only heating partially
- Inconsistent or uneven heating
- The cooktop displaying error codes related to the heating element
- Visible damage or discoloration on the element
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The coil on the small burner was damaged. Elimate would not work. Dorothy T. • New Madrid , MO • March 17, 2014
We ordered a new elimate, which was shipped the same day. Very good.
Read more
More
$118.46
- Compare At:
-
$139.78
- You Save:
-
$21.32
Genuine Ge part
By: Ge
Part Number: WH02X10002
The Screw is an OEM part for GE appliances, commonly used in washing machines, dryers, and other household appliances. This screw is designed to secure various components, ensuring they remain properly aligned and fastened during operation. Its precise design and durable construction are tailored to meet the specific requirements of GE appliances.
Over time, screws can become damaged or lost due to regular use, vibration, or during maintenance and repair activities. A missing or damaged screw can lead to loose parts, affecting the overall functionality and safety of the appliance.
Symptoms of a bad or missing screw include:
- Loose or rattling components
- Misalignment of parts
- Noise during operation
- Parts or panels not staying securely in place
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Had to replace drain hose on he washer Tom F. • Lovington , IL • January 14, 2020
Put new hose on. It was the kind that pushed in and had a flange on it with two screws.
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB10T10007
This replacement door hinge supports and controls the oven door's movement so it opens smoothly and closes securely against the gasket. Replacing a worn hinge restores proper alignment and sealing to help maintain consistent temperatures and safe operation. What it does:
- Provides the pivot and spring tension for controlled door motion
- Helps the door close fully to maintain a proper seal
- Promotes smooth, balanced opening to prevent slamming or binding
- Common symptoms: door won't close fully, sits uneven, drops open, or feels loose/noisy
What's included:
Install notes:
- Disconnect power and allow the appliance to cool completely before servicing
- Remove the door per your model's instructions; support the door and engage hinge locks if equipped
- Replace the hinge using existing mounting hardware; inspect hinge receivers for wear
- Reinstall the door and verify alignment and gasket contact; replacing both hinges together can help maintain even tension
Do-It-Yourself Stories from Customers like You
Oven door stuck Delores W. • Troutville , VA • January 02, 2016
We had to pry the door open with a crow bar. We then ordered a replacement hinge from your company. We were able to find the part by looking at your diagram of our oven. We ordered it and it came in two days. My husband put it on and the door now works beautifully.
Read more
More
$71.30
- Compare At:
-
$84.85
- You Save:
-
$13.55