Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Illuminates the microwave interior for visibility during cooking. Replace when burnt out or dim. Confirm fit with your model number before ordering.
Removed the Microwave from the wall, then had to almost completely disassemble the sheet metal surrounding the microwave unit itself. Lots of screws and wires to work around. Takes 2 people to remove the microwave and set it on a stand outside of the wall unit. Once you get to the light bulb, the replacement is easy, just very challenging to get to the light bulb. Read more
Replace your microwave's broken or cracked glass turntable tray. This circular rotating plate sits on the cavity floor to hold food during cooking.
This was a very easy replacement of the broken glass turntable. What stood out most for me on this was the great experience I had with ApplicancePartsPros.com. I rarely, if ever, write reviews but this experience deserves notice. I found a couple other sites that had a slightly lower price, but AppliancePartsPros.com made it easier for me to verify that I was ordering the right part. On checkout, I selected standard shipping but the part arrived the next day. It was very well packaged (glass... Read more
Microwave won't start or shows door error? This door switch signals when the door is closed so power flows to the magnetron. Moderate DIY repair, 30-45 min.
I'm a 56 year old divorced woman. I started doing these kinds of repairs to save some money and honestly, to see if I could. So yes, if I can do it, it's not that tough to do. My microwave is built in above the stove - getting it down and back up was the hardest part of the job. An extra pair of strong hands really helps-for anybody, not just a 56 year old woman. The actual repair was pretty easy. Most likely problem was pretty obvious after a little research. Easy to take off cover, get... Read more
Fix sparking or melted plastic in your microwave. This waveguide cover protects the magnetron opening. Easy DIY replacement—just pry off and snap in.
Ordered this part for my KA SS microwave and it was a perfect match. Removing the old cover was not that easy. It snaps in tight and I did not want to damage the SS top. The two fixed tabs go toward the back of the microwave and the two tabs with pinch pins go toward the door. You have to lower the end of the cover far enough to push something into the center arm of the tabs and release the pinch pins allowing the cover to drop down, then you pull toward the door and pull the tabs in the... Read more
Support ring sits beneath the glass turntable and allows smooth rotation during cooking. Replace if cracked, worn, or causing tray wobble or binding.
I removed the Shaft by just pulling up on it. I noticed the flat sided hole on the bottom of the Shaft was damaged and a small piece of it was missing. By using a mirror and a pair of tweezers, I was able to remove the small broken off piece of plastic from the hole in the middle of the bottom of the oven. The Shaft still would not turn the plate because of the damage. I ordered the new part and installed it, and everything now works fine. I decided to replace the Ring as well because the... Read more
Microwave not heating but runs? The magnetron generates microwave energy for cooking. Intermediate repair requiring discharge of capacitor first.
Replacing a magnetron in my particular 9-year-old microwave (a microwave/hood combination) was not a simple “plug & play” operation. That is why I am placing this in the slightly difficult area. First, it takes 2 people to remove the microwave from the top of the stove. Next the main outer panel need to be removed. After that, 2 sheet metal panels need to be removed in order to expose the high voltage components for testing. Always discharge the high voltage capacitor first before doing... Read more
Microwave not heating or making loud humming noise? The diode converts AC to DC power for the magnetron. Moderate difficulty repair, 1-2 hours.
Replaced Magnetron and diode. Fixed problem and microwave workso again. Very time consuming because of microwave/oven built-in combo. Not easy to get to parts that needed to be replaced. Still cheaper to repair than to replace. Read more
Microwave turntable won't rotate or stops under load? This turntable motor restores even heating. Accessed from the bottom with basic tools.
Removed bottom cover plate and unscrewed motor housing Read more
Microwave won't start or shows door error? A blown line fuse is often the culprit. This fuse protects against power surges and is a common DIY fix.
Tested the High Voltage Capacitor which showing no capacitance and no resistance. Replaced it together with the diode and the line fuse no longer blew and the microwave is back in service. Read more
Microwave not heating or making loud humming noise? The high-voltage capacitor supplies power to the magnetron. DIY repair in under an hour.
I ordered a new magnetron and a new capacitor and after they arrived I set to work. I took plenty of pictures with my phone to remind me how the components came apart but it was pretty straight forward. Once the new parts were in and everything was reassembled the microwave worked good as new. The repair was less than a third the cost of replacement and no special tools are required. Just be careful to discharge the capacitor. This website is a great resource. Read more
Microwave door won't open when you press the button? This release rod connects the button to the latch mechanism, restoring smooth door operation.
Fix a microwave with a non-responsive display, missing clock segments, or buttons that don't work. This control board manages timing and power functions.
Replaced display device. Read more
Fix a microwave turntable that won't spin with this drive shaft. Connects the motor to the coupler and glass tray. DIY repair in under 30 minutes.
Turned oven up on it side to get to bottom and removed bottom cover(5 screws), then 2 screws holding the small motor in place. Extracted the bad coupling that connects the motor to the hub that turns the turntable. Inserted the new coupling, remounted the motor, then installed the bottom cover, turned oven back upright, plugged it in and turntable operates normally. Read more
Microwave won't start when door closes? This door interlock assembly restores the safety switch mechanism. Requires panel removal to install.
Microwave turntable not rotating or making grinding noise? This coupler connects the motor to the tray for smooth rotation. Simple DIY fix in minutes.
Microwave won't heat or has no power? A damaged fuse block can prevent electrical flow. This holder secures the fuse to restore safe operation.