Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replace your dim or burnt-out microwave light bulb to restore interior illumination. Easy screw-in installation. Confirm fit with your model number.
After extremely poor support from WhirlpooI and researching numerous U-Tube videos, I fully troubleshot potential failed components and connections. All appeared to function properly, so I reassembled the unit and experienced the same problem as before. I then narrowed down the problem to either the Touchpad ($57+$8 shipping) or the control board ($295+shipping). If those did not work, then a new Microwave of better quality, reliability and support than original microwave, Unfortunately,... Read more
Microwave displays 'close door' message or won't start? The door interlock switch is likely failed. Moderate DIY repair—replace all 3 switches together.
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get... Read more
If your microwave turntable won't spin, makes grinding noises, or jerks while running, this motor is likely the fix. Simple 10-minute DIY replacement.
It was a really simple fix, and I kick myself for waiting so long to attempt the repair. Following the YouTube video, I had the old motor out and the new one in in approximately 10 minutes. I even felt the satisfaction of having completed a repair project. Read more
Metal screw for mounting microwaves to upper cabinets. Replace if lost, stripped, or damaged during installation. Installs with screwdriver.
Installed mounting bracket. Redrilled top screw holes. No template for hole locates but plenty of options to make sure you get a stud. Very easy to install. Read more
Replacement vent grille cover for microwave exterior ventilation opening. Needed when original grille is cracked, broken, or has tabs snapped off.
Ordered part from appliance part pros. 3 days later part arrived. Replaced the broken vent all is well. Great company!!!! Read more
Microwave has no power or won't heat? A blown thermal fuse is often the cause. This safety part protects against overheating. DIY repair in 30 minutes.
It is difficult (if not impossible) to remove the electronic switches from the hard plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed. Read more
Supports and seals the turntable motor in your microwave. Replace if cracked, worn, or missing to maintain proper motor alignment and protection.
Very easy fix. Unplugged microwave, then lowered bottom panel, removed the two leads to the turntable motor, removed two screws attached to motor, removed old motor, put new spacer on motor stem, installed motor with same two screws, reattached the two wires, reattached panel ( after cleaning all the grease that built up over the last 6 years), plugged microwave in and good as new! Took me twenty minutes. Note: the two screws holding the motor were not Phillips like those holding the panel. So... Read more
Fix a wobbly or noisy turntable with this microwave support ring. Replaces cracked or missing rings causing bumping sounds. Easy DIY install.
I have used appliance parts pros before, their website is easy to use. I typed in the model and serial numbers, of course the number I have is rare, It did not show up on the list of models. It made me a little hesitant to submit the order. All three products came in the same box and on the same date it was promised. Just after opening the package I put everything in the microwave and I was relieved when everything fit perfectly. Read more
Microwave won't start or shows door error? This door switch signals when the door is closed so power flows to the magnetron. Moderate DIY repair, 30-45 min.
I'm a 56 year old divorced woman. I started doing these kinds of repairs to save some money and honestly, to see if I could. So yes, if I can do it, it's not that tough to do. My microwave is built in above the stove - getting it down and back up was the hardest part of the job. An extra pair of strong hands really helps-for anybody, not just a 56 year old woman. The actual repair was pretty easy. Most likely problem was pretty obvious after a little research. Easy to take off cover, get... Read more
Air damper assembly for over-the-range microwaves. Installs at top exhaust opening to control airflow direction. Replace if cracked, missing, or broken.
Bought a new home with microwave venting into kitchen. Ordered damper assembly needed to vent through the wall to the outside. Removed microwave, followed directions in original installation instructions, turned fan over, cut hole in wall, installed wall cap and replaced oven. Problem solved. Read more
Microwave won't heat but hums loudly? The diode regulates power to the magnetron. Test with multimeter—reads one direction only. Moderate DIY repair.
Replacing a magnetron in my particular 9-year-old microwave (a microwave/hood combination) was not a simple “plug & play” operation. That is why I am placing this in the slightly difficult area. First, it takes 2 people to remove the microwave from the top of the stove. Next the main outer panel need to be removed. After that, 2 sheet metal panels need to be removed in order to expose the high voltage components for testing. Always discharge the high voltage capacitor first before doing... Read more
Traps grease particles under your microwave to maintain cleanliness and efficiency. Replace when clogged or discolored. Verify fit with your model number.
I started by watching the video posted by couple of people on youtube on how to replace a microwave handle. After taking out the liner, I hit a roadblock with unscrewing the handle screw. The grip on the front side had basically melted causing it to be loose, so the screw and the plastic part would rotate together. After trying several things, I gave up and took it to Ace hardware to find an extractor of some sort. Luckily, the guys there used several tools and managed to get the screw out.... Read more
Microwave says 'close door' when already closed? Door switch failure is the likely cause. Most DIYers replace all three switches together in 30-60 minutes.
Connects the two halves of your microwave cooking tray together. Replace if cracked, broken, or melted. Essential for proper turntable function.
Obtained the replacement motor and tray coupler from Appliance Parts Pro. Video of the typical replacement was very helpful to show what to expect and how to replace the motor and coupler. The removal of the bottom plate was held in place by several phillips screws. The motor was attached with two torx screws. The electric connection clips to the motor required needle nose pliers to pull them off. The tray coupler was simple to install after the motor was secured and bottom plate was replaced.. Read more
Microwave turntable won't rotate or makes rattling noise? This motor drives the glass tray for even heating. Easy 10-minute DIY fix with basic tools.
Hardware kit for mounting over-the-range microwaves to wall and cabinet. Includes screws and brackets needed for installation. Replaces missing hardware.
We found the parts on this website. Thanks to your search bar, we could see if the parts would work on our model microwave. Read more