Maytag Cwe5800ace Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (373)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Temperature Sensor Kit

4.9 (155)

By: Whirlpool

Part Number: 12001656

The Oven Temperature Sensor Kit is an OEM part for Whirlpool ovens. This sensor is essential for monitoring the oven's internal temperature, ensuring that it reaches and maintains the correct temperature for baking and cooking. The sensor is approximately 7 inches long.

Over time, the oven temperature sensor can fail due to repeated heating and cooling cycles, exposure to spills or grease, or electrical issues. When the sensor malfunctions, it can result in inaccurate temperature readings, affecting cooking performance and food quality.

Symptoms of a bad oven temperature sensor include:

The oven not reaching the set temperature
Food cooking unevenly or not fully
The oven overheating or underheating
Error codes related to temperature issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Oven is too hot
Little to no heat when baking
Won't start
Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. Joe D. • New Berlin , WI • March 20, 2019

First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on... Read more

$41.95

Compare At:: $49.92
You Save:: $7.97

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Terminal Block

4.8 (36)

By: Whirlpool

Part Number: WPW10245259

The Terminal Block is an OEM part for Whirlpool ranges. It serves as a crucial connection point for the range’s electrical wiring, ensuring a safe and reliable transfer of power to the appliance.

Over time, terminal blocks can deteriorate due to factors such as heat exposure, electrical surges, or wear and tear. When the terminal block becomes damaged or corroded, it can lead to poor electrical connections or potential safety hazards.

Symptoms of a bad terminal block include:

Burnt or scorched connections
Intermittent power loss to the range
Difficulty in the range heating up properly
Visible damage or corrosion on the terminal block

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Won't start
Element will not heat
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Oven would only heat up to 347° f in bake mode Chris M. • Scottsdale , AZ • October 25, 2021

I determined the hidden bake element below the oven cavity was not working, because the bottom of the oven was cold during normal use. If you have a built-in microwave + oven combination (mine is KitchenAid Model No. KEMS308SSS05), this is a difficult repair. The engineer who designed this oven should be invited to succeed elsewhere. It is impossible to access the bake element from the inside of the oven, so the How To video associated with this part will not help you. I had to remove the... Read more

$26.95

Compare At:: $32.07
You Save:: $5.12

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Bake Element Kit

5.0 (101)

By: Whirlpool

Part Number: WPY04000066

The Range Element Kit is an OEM part for Whirlpool ranges. This kit typically includes elements used for heating the oven or stovetop, ensuring efficient and even cooking or baking. The element measures 16" wide and 16" from the mounting plate to the other side. The terminal depth is 3", and the total element length is 19". It is rated at 2100 watts and 240 Volts.

Over time, heating elements can become worn out or damaged due to repeated use, exposure to high temperatures, or electrical issues. A malfunctioning element can lead to uneven cooking, longer cooking times, or the range not heating up at all.

Symptoms of a bad Range Element include:

The element not heating up
Uneven cooking or baking results
Visible damage such as burns or breaks in the element
Sparks or electrical issues when the element is turned on

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Oven not heating evenly
Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You Oven heating element burned out. Andrew M. • Odessa , MO • February 06, 2021

The top part of our double wall oven quit working a couple years ago. We asked an appliance repair guy if he could find a replacement heating element and after a few days, he told us he couldn't. We switched to using the bottom and recently I started looking to purchase a new oven. On a whim, I decided to check the Interwebs and found several sites claiming to have the part that the appliance repair guy said didn't exist. I ordered from Appliance Parts Pros and a few days later the... Read more

$46.95

Compare At:: $66.32
You Save:: $19.37

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Spray Paint

4.9 (35)

By: Whirlpool

Part Number: 350930

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.

Symptoms needing for Appliance Spray Paint include:

Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
A desire to refresh or update the appearance of the appliance without the need for complete replacement
Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

$24.95

Compare At:: $29.94
You Save:: $4.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Touchup Paint

4.9 (33)

By: Whirlpool

Part Number: 72017

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

Visible scratches or chips on the appliance surface
Areas of exposed metal prone to rust
Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Chipped paint Thomas S. • Middletown , DE • September 03, 2014

Touch up paint Read more

$12.55

Compare At:: $15.06
You Save:: $2.51

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.6 (7)

By: Whirlpool

Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

Loose or wobbly components within the appliance
Panels or parts that are not securely attached
Rattling or unusual noises due to loose parts
Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Broil Element (3000W, 4-Pass)

5.0 (8)

By: Whirlpool

Part Number: WP7406P203-60

This 3000-watt, 4-pass broil element provides the intense top heat your oven needs for searing and browning. Replace a burned-out top element to restore consistent broil performance.

Supplies direct, high heat from the top of the oven during Broil
Common fix for no heat in Broil mode
Helps resolve weak or uneven browning from the top
Replace if the element is blistered, cracked, or arcing

What's included: Broil element only Installation notes:

Disconnect power at the breaker and allow the oven to cool completely before servicing
Remove mounting screws, gently pull the element forward to access wires, and transfer connections one at a time
Support the element and avoid flexing it; ensure terminal insulators/boots are intact
Reinstall with existing hardware, secure connections, and test the broil cycle

Do-It-Yourself Stories from Customers like You Broiler and baking element no longer heated Eva T. • Auburn , CA • February 02, 2018

Replaced the elements with new ones ordered through Appliance Parts Pros. I wanted to tell you how pleased I am that I ordered the baking and broiler elements for my Maytag oven from you. Your website diagrams for my model of oven helped immensely in figuring out what parts I needed. Your order process was easy and the parts arrived within two days just as stated. Best part of all, the new elements work perfectly! I will bookmark your site for future appliance part needs and I look forward to... Read more

$87.95

Compare At:: $103.78
You Save:: $15.83

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Temperature Sensor

4.8 (12)

By: Whirlpool

Part Number: WP7430P044-60

This oven temperature sensor monitors heat inside the oven and sends that signal to the control to regulate the heating elements. Replacing a faulty sensor restores accurate preheat and steadier baking performance. What it does:

Continuously measures actual oven-cavity temperature and reports it to the control
Lets the control board cycle bake and broil elements to maintain the set temperature
Common symptoms of failure: won't reach set temperature, runs too hot or too cold, extended preheat, or sensor-related error codes on the display
If the sensor reads open/shorted, many controls will disable heat as a safety

Includes:

1 oven temperature sensor

Install notes:

Disconnect power at the breaker; allow the oven to cool completely
Sensor is typically mounted to the rear oven wall; remove mounting screws and gently pull the sensor forward to access the connector (some models require rear-panel access)
Disconnect the 2-wire plug carefully to avoid losing the connector into the insulation
Route wiring as original, seat the connector fully, secure the sensor, restore power, and test operation

Do-It-Yourself Stories from Customers like You Oven acting erratically flashing bake indication shut down during cooking checked control panel diagnostics per service sheet in back of oven code indicated sensor open circuit detected Jay G. • Columbia , SC • July 19, 2014

I replaced the sensor. Turn off power, be sure oven is cold Remove oven door (put in broil position, pull straight up, set door aside, carefully release tension on arms and gently park them against the door frame - do not let them smack into the steel or it will crack the ceramic coating) Remove oven rack Remove 2 screws holding sensor to back of oven cavity wall Gently pull leads forward to find connector, it is supposed to be able to be pulled out from the front. However, my connector got... Read more

$100.77

Compare At:: $119.92
You Save:: $19.15

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Broil Pan Set

5.0 (17)

By: Whirlpool

Part Number: 4396923

The Broil Pan Set is an OEM part for Whirlpool ovens. This set includes a broil pan and an insert, designed to catch drippings and ensure even heat distribution during broiling, allowing for perfectly cooked and crisp results.

Causes of a bad broil pan set can include prolonged exposure to high temperatures, which may lead to warping or distortion of the pan. Additionally, frequent use without proper cleaning can result in rusting, chipping, or buildup of residues that compromise the pan's functionality and safety.

Symptoms of a bad broil pan set include:

Warping or bending of the pan
Presence of rust or corrosion
Surface chipping or flaking
Difficulty in achieving even cooking results

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You There was no problem Harry M. • Olivebranch , MS • March 10, 2015

I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more

$46.95

Compare At:: $55.40
You Save:: $8.45

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Upper Oven Door Hinge

5.0 (9)

By: Whirlpool

Part Number: 74001984

The Door Hinge is an OEM part for Whirlpool ovens. This hinge attaches the oven door to the frame, allowing it to open and close smoothly while maintaining a secure seal when shut.

Causes of a bad door hinge can include normal wear and tear over time, damage from applying too much force when opening or closing the door, or corrosion due to exposure to high temperatures and moisture.

Symptoms of a bad door hinge include:

The oven door not closing properly or staying ajar
Difficulty in opening or closing the oven door
A misaligned oven door
Unusual noises or stiffness when moving the door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Hinges on upper oven in double wall oven needed to be replaced. Michael B. • Las Cruces , NM • February 07, 2022

Purchased proper hinges. Lifted oven doors off the hinges. Removed screws securing the oven to the cabinet, then slid out the unit from the cabinet far enough to access the hinges. Then removed trim to better access the hinges. Then removed the screws holding the hinges. Then installed the new hinges, secured them with the screws, then reinstalled the trim, then slid the unit back into the cabinet, and secured it in place with the screws. Finally, I placed the oven doors back on my hinges. ... Read more

$87.38

Compare At:: $104.86
You Save:: $17.48

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Light Assembly

4.9 (15)

By: Whirlpool

Part Number: WP74011278

The Oven Light Assembly is an OEM part for Whirlpool ranges. This part lights up the interior of the oven, allowing you to monitor the cooking process without opening the oven door.

Over time, the oven light assembly can fail due to normal wear and tear, exposure to extreme heat, or electrical issues.

Symptoms of a bad oven light assembly include:

The light not turning on when the oven door is opened or when the light switch is activated
Flickering or dim lighting inside the oven
A broken or missing protective cover

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Light bulbs kept blowing went through about six bulbs inabout four weeks F. Leo V. • Hillsborough , NC • October 18, 2015

I ordered the replacement light module and install it. I was able to install the module without removing the walloven from the cabinet. Thank you for quick delivery of the module. Read more

$80.21

Compare At:: $94.65
You Save:: $14.44

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Door Seal (Horizontal, Top/Bottom)

4.9 (16)

By: Whirlpool

Part Number: WP7212P006-60

This horizontal oven door seal lines the top and bottom edges of the door opening to keep heat contained inside the cavity. Replacing a worn seal restores stable temperatures, more efficient preheating, and consistent baking results.

Seals the oven opening along the top and bottom edges to reduce heat loss
Helps maintain set temperature and overall cooking performance
Replaces cracked, frayed, flattened, or brittle horizontal gasket
Common signs include visible gaps, heat escaping around the door, longer preheat times, and temperature fluctuations

What's included: One horizontal door seal. Install notes:

Disconnect power and allow the oven to cool completely before servicing
Open the door and carefully pull the old seal straight out of the retainer
Note clip/retainer positions as you remove the old seal and reuse them as designed
Press the new seal evenly into place without stretching; ensure corners are fully seated for a uniform seal

Do-It-Yourself Stories from Customers like You Oven would not heat up past 100 degrees and the light switch was broken Gary B. • Redondo Beach , CA • August 28, 2015

A new ignitor was installed, and a new light switch was installed Read more

$56.95

Compare At:: $67.77
You Save:: $10.82

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

5.0 (3)

By: Whirlpool

Part Number: WP4159193

Size: 10-24X5/16-NI

Do-It-Yourself Stories from Customers like You Hinges were weak Don M. • Colchester , VT • December 31, 2016

Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more

$8.95

Compare At:: $10.56
You Save:: $1.61

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Indicator Light Assembly (Snap-In)

4.6 (7)

By: Whirlpool

Part Number: WP7407P182-60

This snap-in indicator light assembly mounts in the control panel and illuminates when a function is active. Replace a failed or damaged indicator to restore clear status feedback on your range or wall oven.

Provides visual indication that a selected function is active
Restores at-a-glance status on the control panel
Common symptoms: indicator won't light, flickers, stays on constantly, or the lens/housing is damaged
Direct replacement for the original snap-in lamp assembly

What's included: 1 snap-in indicator light assembly Install notes:

Disconnect power at the breaker or unplug the appliance before servicing
Access the rear of the control panel; note wire locations or take a photo
Depress the retaining tabs to release the old light; transfer wires to the new assembly and snap it fully into place
Restore power and verify indicator operation

Do-It-Yourself Stories from Customers like You F3 error code and light socket burnt out Amanda A. • Gaston , IN • December 31, 2016

After researching on the internet I found I needed a new oven temperature sensor, and this site had the fastest delivery and a great price! I also like the videos telling you how to do the repair. My husband is the handyman, but has too many projects on his plate and the repairs looked simple. I did the temperature sensor all by myself when he wasn't even home, and the light socket replacement I only had trouble taking the old part out, so my husband pulled it out for me, but I did all the... Read more

$48.95

Compare At:: $58.25
You Save:: $9.30

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Maytag Cwe5800ace Parts

Appliance Light Bulb

Oven Temperature Sensor Kit

Terminal Block

Bake Element Kit

Appliance Spray Paint

Appliance Touchup Paint

Screw

Broil Element (3000W, 4-Pass)

Oven Temperature Sensor

Broil Pan Set

Upper Oven Door Hinge

Oven Light Assembly

Oven Door Seal (Horizontal, Top/Bottom)

Screw, 1 Piece

Screw

Indicator Light Assembly (Snap-In)