Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a washer that won't drain or shows ND error code. This drain pump assembly removes water during drain cycles. DIY repair in 30 minutes with video.
I looked up the error code on the internet and determined that the drain pump had failed. I watched the Appliance Parts Pros repair video on how to replace this part, ordered a new pump and installed it myself in less than 30 minutes. This was an easy job that saved me the price of a service call, at least one hour of labor, and perhaps a markup on the part--probably around $200.00 total. I do this kind of work around the house a lot and win points with my wife. I still haven't received my... Read more
Secures washing machine hoses to prevent leaks in the water system. Replace if damaged, corroded, or connections are loose. Verify fit by part number.
We ordered parts from appliance parts pros and I fixed it. Read more
Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.
First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more
Rubber inlet hose that connects your washer to the water supply. Replace if cracked, leaking, or worn. Standard 5-foot length with included washers.
Replaced flow meter and control valve Read more
Secures hoses to fittings and prevents leaks in your washer. Replace if worn, loose, or missing to stop drips and keep water connections tight. Confirm fit.
I ordered the required parts from your website, the parts required were easily identified from the website tub blowup. The parts were delivered within 2 days and installed within 15 minutes Read more
Small metal clip that secures panels, brackets, or tubing in place inside appliances. Replace if bent, fatigued, or missing to restore secure mounting.
Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more
8-16 x 3/8 inch screw fastener for dryers. Secures baffles to drum and various internal components. Replace if missing, stripped, or damaged.
Plastic retainer clip that secures the top cabinet panel to the washer chassis. Replace if cracked, broken, or missing to restore alignment and prevent rattling.
I replaced the fill valve assembly with a new one. Had to look carefully at the parts diagrams to make sure I ordered the right one since the serial number break old vs. new didn't seem to match the number on my machine. On this particular machine you don't need to pull it out too far from the wall-leave the hoses connected to the valve, remove the screw holding the valve bracket, and pull into the washing machine where you can easily access the hose ends. A putty knife is needed to open... Read more
Fix washer control issues with this switch mounting screw. Secures cycle selector switch in console for reliable function. Simple DIY fix in minutes.
I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart. Read more
Replace your washer's O-ring seal to stop leaks at connection points. This rubber gasket creates a watertight seal. Confirm fit with your model number.
Secures panels and components in place. Replace this fastener if stripped, corroded, or missing to restore proper alignment and eliminate rattling.
Ordered boot watched video had no trouble finding ,parts easily entered part num,no problems at all Read more
Filters debris and sediment from incoming water before it reaches the inlet valve. Replace if clogged or missing to restore proper fill flow. Confirm fit.
The machine would not run a full cycle before it cut off and had the code "FE" and water was too high. The water inlet valve needed to be replaced since it was letting in too much water at time. The repair was easy. Unplug machine and turn off cold water. Remove cold water line and drain water into bucket. Remove back two braces located at the top on each end of machine This will allow you to move top cove back about one inch. Pull back top cover about 1 inch then lift off cover. Remove... Read more
Usually ships within 4 - 14 days
Replace your washer hinge bushing to restore smooth, quiet lid movement and proper alignment. Fixes squeaky or misaligned lids. Confirm fit with your model.
Replaced lid safety switch, actuator and plunger. Read more
Washer won't spin or makes clicking noise during spin cycle? A worn clutch assembly prevents proper drum rotation. Moderate DIY repair restores spin function.
Actually the 2nd time to replace clutch, first one about 8 years ago. Priced clutch at appliance/repair shop near where I live. Price for part around $235.00 at shop, then I looked at Appliance part pros and same OEM part was around $175.00. Use flat scraper to release the two clips holding the top down, then a nut driver, 5/16 I think, to remove two top clips and front of machine lifts off. Lean machine against wall for bottom access to remove nut holding on clutch. reverse process and your... Read more
Creates a watertight seal at the tub outlet to prevent leaks and water pooling. Replace if you notice water escaping around the drain connection. Confirm fit with your model number.
Power cord supplies electrical power to your washer. Replace if your cord is damaged, frayed, or worn to restore safe operation. Ships neatly coiled.