Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Connects the detergent dispenser to the wash tub in your washer. Replace if cracked, leaking, or causing water damage to other components during cycles.
First of all, I want to say that this is not the first time that I have used AppliancePartsPros. They give you everything you need in the most simplified manner to repair your appliances at home. I ran my washer until I started to see the leak coming from underneath. After verifying that the intake hoses, drain hose and pump were not leaking, I opened up the washer from the top by unscrewing the two screws on the back brackets and lifting up and out. Because the leak was displaying at the... Read more
Seals washer tub halves to prevent leaks between drum sections. Replace if leaking onto floor or between shell halves. Confirm fit with model number.
Took the machine apart and found 2 leaks. Drum was leaking and a hose had a hole in it . Read more
Fix a broken or missing detergent dispenser cover that's cracked or won't guide proper detergent placement. Simple 5-minute replacement repair.
After examining it, 2 of the 4 retainer clips had broken off. My wife grabbed her tablet, found Appliance Parts Pros website, saw 2 videos featuring our exact model of washer and ordered the 3 parts to replace broken and soon to fail parts ! Shipping was extremely fast ! Took out old assembly, replaced with new assembly in about 15-30 second, wife was happy, therefore I was happy ! Thx for being there ! Read more
Secures the drum baffle (lifter vane) to your washer drum. Replace missing, stripped, or loose screws to keep baffles firmly attached and prevent rattling.
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy Read more
Fix E53 errors, no spin, or drum not moving. This motor control board restores washer operation. DIY repair in 45 minutes with our installation video.
After taking the top off the washer I found the Tech Data Sheet ( for repair person ) The E53 code was listed as Low Voltage to the motor board and referred me to test #15. Which stated to check the "drum water NTC" ( Negative Temperature Coefficient or Thermistor). What was misleading was that there are 2 NTC's. If your washer has a "Sanitize" feature , then there is a drum water NTC as well as one on the fill valve body. IF you have the sanitize feature then you need to replace the drum water... Read more
Seals hot and cold water connections to your washer's dispenser. Replace if you notice leaking at the inlet assembly. Confirm fit with your model number.
Water was accumulating in the drawer pedestal, it was leaking from the front of the washer so I thought it was the front door seal. I also noticed it would leak even when the washer was not being used so I doubted it was the door seal. I googled the leak problems and watched a few videos which gave me confidence on washer disassembly. With the top panel off I noticed the leak coming from the water inlet assembly. Appliance Parts Pro’s had the part and replacement video and I replaced the part... Read more
Fix a washer that won't drain or makes buzzing sounds during drain cycle. This pump assembly removes water from the tub. DIY-friendly repair restores draining.
Replaced Drain pump. Read more
Replaces a cracked, broken, or missing washer drum baffle. Mounts inside the drum to lift and tumble clothes during the wash cycle. Easy installation.
Had to bend down the retaining tabs (on the drum) a little to allow the paddle to slide on. Placed the paddle with the tabs in all of the grooved slots, pushing down with one hand, I used my palm to firmly push/tap it into its locked position. I purchased new vane screws (Part #: AP2106572 "131302800") and used a Phillips driver to screw them in (one each paddle). It's that simple! Read more
Washer won't spin or makes loud noises? A faulty drive motor is often the cause. Moderate DIY repair with video guide. Fixes E58 error codes.
Tested the resistance of the motor windings. They showed around 2.5 ohms. This proved that the motor was bad. The new motor showed around 3.5 ohms. I installed it back in place and the washing machine worked fine. Read more
Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.
New hose and clamp. Read more
Fix washer filling when off or showing E11 error with this water inlet valve. Controls hot and cold water flow. Moderate DIY repair, 1-2 hours.
Replaced manifold Read more
10-inch heating element for washers. Mounts on the back of the outer tub assembly under the spinner. Replace if cracked, burned out, or corroded.
Replaced old element with new element took all of about 20 minutes to do the entire project I would recommend watching it on YouTube a couple times to get it in your head what has to be done, then get it done, Bill. Read more
Replaces stripped, rusted, or missing #10-16 screws that secure cabinet panels, brackets, and internal components in washers and dryers.
I replaced the part and instructed users to be very delicate and gentle when closing the door. Read more
Replacement mounting screw for washers and laundry centers. Secures components like pulleys, brackets, and panels. Replace if missing, stripped, or damaged.
New parts ordered and installed. Hooked everything back up and she's running like a stealth bomber over North Korea.. completely silent Read more
Machine screw secures panels, brackets, and internal components in washers. Replace missing, rusted, or stripped screws to restore proper fit and alignment.
I ordered new latch and 2 new screws ( imagine not having the screws). I put latch in place and with a phillips screw driver attached 2 screws. Tada works like new. If the owner would have just done this herself, I wouldnt have a new set of infinity front loaders for under $300. So thrilled that I can get replacement parts for my appliances. Read more
Manages airflow and routes air through the washer. Replace if damaged or missing to maintain performance and reduce heat and moisture buildup. Confirm fit.
Easy fix with screwdriver. Quick shipping Read more