Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Plastic bracket that secures door shelves in place. Replace when cracked, broken, or clips are damaged. Easy snap-in installation. Video guide available.
Easy to replace with the shield and paddle assembly. Steps are: 1. use a flat head screwdriver to push the tabs at the base of the control panel. remove the wire connectors by gently prying them straight off. 2. remove the 4 phillips screws holding in the old assembly. 3. Install the new assembly by carefully putting the paddle behind the water pipe that sticks out. You may have to push the paddle one way to get it around the pipe and then back into place. 4. reinstall the screws. 5. reconnect... Read more
White plastic bar that secures bottles and jars on your refrigerator door shelf. Replace if cracked, broken, or missing. May require cutting to fit.
I replaced the bar and rack support. It was fairly easy. I measured the shelf and cut the bar to size. Then I inserted the bar into the shelf support and the inserted the bar and supports into the slots on the left and right. Thanks Appliance Pros for the fast delivery and the exact items that were ordered. Read more
Ice maker stopped working or leaking water? This ice maker kit replaces failed units in about 10 minutes. Includes adaptor harness for compatibility.
After about three months of returning to my youth, filling ice cube trays, I decided to venture into the freezer and yank the old ice maker from its mounting. Since this was the third time this very ice maker had decided to stop functioning, it was time to get a replacement. I suspected the heating element was open and the motor was screaming trying to push the little frozen blocks of ice from their form, with distortion occurring. I ordered a replacement from this very company, received it... Read more
Refrigerator door hinge bearing provides smooth pivot action for proper door operation. Replace if door sags, sticks, or pops open. Confirm fit with your model number.
I put a piece of two-by-four, (2"x4") about 10-inches long on edge under the door to support the door. I removed the 3-bolts attaching the door hinge at the bottom corner. I then slid the washer onto the post and placed the bracket back in place with the 3-bolts. That did the trick. I used a 3/8-inch socket with extension and a ratchet. Read more
Plastic support bracket that secures shelves inside your refrigerator door. Replace if cracked, broken, or missing to restore stable storage for bottles.
Refrigerator not cooling properly? A broken condenser fan blade prevents heat removal from coils. Easy DIY fix—just pull off and press on. Video included.
No local refrigeration house had one. APP did! I got it in 2 days. Everything is A OK. Read more
Protective washer that sits between the door hinge and frame. Replaces worn or missing washers that cause door sagging, dragging, or poor seal contact.
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
Frost buildup on freezer wall? Defrost thermostat monitors evaporator temperature to prevent ice buildup. DIYers report 15-minute installation fixes issue.
My Frigidaire side by side refrigerator/freezer suffered a catastrophic failure. The symptoms were as follows: 1) Frig not cold 2) No Ice being made in the freezer section 3) Items at the back of the freezer were frozen but items on the door shelves would not freeze. The back of the freezer was cold but the closer you got to the door the warmer it got. After removing everything from the unit I saw that there was substantial ice buildup on back of the freeze, specifically around the vents,... Read more
Seals refrigerator door to keep cold air in and prevent warm air leaks. Replace if torn, cracked, or causing gaps. Confirm fit with your model number.
My co-worker bought a house to flip and gave me the refrigerator. I'd been looking for a garage refrigerator to store water, cola, etc in. Fridge was essentially fine but I sanded and painted one side which had rust spots. Turned out like new. The door seal was moldy and didn't seal properly. The only advice I can lend is to take the door off the hinges and lay it down flat. So much easier. With this seal you basically just take out all the screws, peel off old seal and set the new one... Read more
Replace your refrigerator light socket when bulbs won't illuminate or burn out quickly. Provides secure bulb connection and prevents overheating. Verify fit.
Went to the Internet, entered the make and model number, read possible causes, viewed videos on fixes and determined it was probably the socket. Viewed the schematic to determine the correct part number. Ordered a new socket. Received it within three days and in less than 5 minutes replaced the light socket. Problem solved and the light now works. Appreciated the videos, ease in ordering and quick delivery. Read more
Plastic mounting block that anchors the refrigerator door handle assembly. Replace if cracked, broken, or causing a loose handle from repeated use.
No problem, 1 min to fix Read more
Wire shelf for refrigerator storage compartment. Replace cracked, broken, or missing shelves to restore organized storage space for food and containers.
Ordered parts from appliance part pros Read more
Fix squealing freezer noise or warm fridge temps? Your evaporator fan motor may have failed. Most DIYers replace this in 10-15 minutes with basic tools.
Once I purchased the correct motor it literally took less that 10 minutes from start to finish to replace the motor. After unplugging the refrigerator, I unscrewed two machine screws to remove the cover and unscrewed two machine screws to remove the motor. I removed the old motor from the housing, installed the new motor, reattached the motor to the refrigerator, replaced the cover, and plugged in the refrigerator. Installation was quick and simple. AppliancePartsPros service was excellent... Read more
Screw secures handles and components on freezers and refrigerators. Replace if stripped, broken, or missing. 10-16 x 0.500 threading fits most models.
Refrigerator warm but freezer cold? A failed evaporator fan motor stops air circulation. This motor replacement restores cooling in 30-60 minutes.
I replaced the defrost thermostat and the fan motor. Very impressed with service. Ordered the parts Thursday night and they where on my porch Saturday morning. Read more
Lower hinge bracket secures the refrigerator door at the bottom, allowing smooth pivoting. Replace if bent, cracked, or causing door misalignment and sagging.