Gdf52opsj Parts

The Water Inlet Valve is an OEM part for GE dishwashers. This part controls the flow of water into the dishwasher. It opens and closes to allow water from the home's supply to enter the dishwasher at the correct times during the washing cycle.

Causes of a bad water inlet valve include wear and tear from regular use, sediment buildup from hard water, or mechanical failure of the valve components.

Symptoms of a bad Water Inlet Valve include:

• Dishwasher not filling with water
• Water filling too slowly or not stopping once the dishwasher is full
• Leaks detected around the valve area
• Unusual noises coming from the valve during the fill cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Circulation Pump is an OEM part for GE dishwashers. It is responsible for circulating water throughout the dishwasher. It pumps water from the bottom of the dishwasher and directs it to the spray arms, allowing for distribution of water and detergent to the dishes.

A bad Circulation Pump Kit can occur due to wear and tear over time, clogs or blockages in the pump, or electrical malfunctions. 

Symptoms of a bad Circulation Pump include:

• Inadequate cleaning results.
• Noisy operation or unusual sounds.
• Water not properly reaching the dishes.
• Leaks or flooding within the dishwasher.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Detergent Module is an OEM replacement part for GE dishwashers. It is designed to dispense the correct amount of detergent at the appropriate times during the wash cycle, ensuring that dishes are cleaned effectively. The module holds the detergent and releases it into the dishwasher when needed, contributing to the overall performance and efficiency of the appliance.

Causes of a bad detergent module can include buildup of detergent residues, which can clog the dispenser mechanism, or damage to the module's door or latch, preventing it from opening correctly. Additionally, electrical faults or wear and tear over time can impair the module's functionality, leading to ineffective detergent dispensing.

Symptoms of a bad detergent module include:

• The detergent not dispensing or remaining in the compartment after the wash cycle
• Dishes not being cleaned properly due to insufficient detergent use
• The module door not opening or closing correctly
• Leaks or drips from the detergent module area
• Error codes related to the dispensing system

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Electronic Control Board is an OEM part for GE dishwashers. As the central processing unit, it monitors and orchestrates all washing functions including temperature, spray arms, and the precise dishwasher cycles.

Causes can be moisture damage, power surges over the years, or natural degradation. Replace it with this genuine GE control board to restore optimized cleaning and sanitization along with long-term reliability.

Symptoms of a bad control board include:

• Failure to start or complete cycles
• Unusual noises or rattling sounds mid-cycle
• Inability to select different wash options
• Erratic temperature or inconsistent water levels

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
 

The Rail End Cap is an OEM part for GE dishwashers. This part is designed to fit on the end of the dishwasher rack rails, preventing the racks from sliding off the rails when they are pulled out for loading or unloading dishes. The end cap plays a role in the smooth operation of the dishwasher rack system, ensuring the stability and security of the racks as they move in and out of the dishwasher.

Causes of damage to the rail end cap often include normal wear and tear, accidental breakage during rack movement, or deterioration over time due to exposure to high temperatures and moisture typical in dishwashers.  

Symptoms of a bad Rail End Cap include:

• Dishwasher racks slipping off the rails 
• Difficulty in pulling out or pushing in the racks smoothly 
• Visible damage or wear on the end cap 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.

Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.

Symptoms of a bad door latch strike include:

• The dishwasher door not latching securely
• The dishwasher not starting or stopping mid-cycle
• Leaks around the door during operation
• Difficulty in closing the door properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Middle Conduit Assembly is an OEM part for GE dishwashers, designed to facilitate the proper routing and distribution of water during the wash cycle. This part ensures that water is evenly distributed to the middle spray arm, providing effective and efficient cleaning of dishes placed on the middle rack. 

Causes of a bad middle conduit assembly can include clogs from food debris, mineral buildup from hard water, and physical damage due to regular use or improper loading of dishes. These issues can impede water flow, reducing the dishwasher’s cleaning efficiency.

Symptoms of a bad Middle Conduit Assembly include:

• Poor cleaning performance, especially with dishes on the middle rack
• Water not reaching the middle spray arm
• Unusual noise during the wash cycle, indicating a disruption in water flow

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Vent Seal is an OEM part for GE dishwashers. Located within the front dishwasher door, it functions to control moist air circulation and maintain humidity levels inside the wash chamber.

Causes of a bad door vent seal can include cracking of the flexible seal material. Mineral or soap deposits may also compromise sealing integrity.

Symptoms of a bad vent seal include:

• Excess condensation buildup within the door interior
• Water leaks detected around door ventilation openings
• Drying and sanitization issues related to inconsistent humidity levels

This GE OEM replacement part is also compatible with Hotpoint, RCA, and select Kenmore-branded dishwashers.

The Mounting Bracket is an OEM replacement part for GE dishwashers. This bracket secures the dishwasher in place underneath the kitchen countertop. 

Causes of failure relate to stresses of a heavy dishwasher pushing down against the countertop edges combined with constant machine vibration over extended service life. 

Symptoms of a cracked or damaged mounting bracket include:

• Excessive movement play or sloshing of the installed dishwasher  
• Strange noises when the dishwasher is running
• Difficulty removing or installing the dishwasher   
• Visible bending of bracket components out of intended position

This genuine GE bracket is compatible with Hotpoint and RCA dishwashers.

The 4.1 Amp Control Board Fuse is an OEM replacement part for GE dishwashers. This fuse is integrated into the control board, acting as a safety device that protects the dishwasher's electronic components from potential overcurrent situations. Blowing or breaking the circuit during electrical surges prevents damage to the control board and other sensitive components.

Causes of a blown fuse include power fluctuations or component failures causing excessive current draw. Over time, fuses may degrade from continued cycling.

Symptoms of a bad fuse include:

• Lack of power to control board and components it supplies
• The inability of the dishwasher to turn on or progress through cycles
• Potential electrical issues if surge currents are not limited

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Sump Gasket is an OEM part for GE dishwashers. It forms a watertight seal around the sump area, preventing leaks and ensuring proper water circulation within the dishwasher.

Causes of a bad sump gasket include exposure to high temperatures, general wear and tear over time, and damage from cleaning chemicals.

Symptoms of a bad sump gasket include:

• Water leaking from the bottom of the dishwasher
• Poor cleaning performance due to improper water circulation
• Visible cracks or deterioration in the gasket material
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Cable is an OEM part for GE dishwashers, designed to support and assist in the smooth and controlled opening and closing of the dishwasher door. This cable connects the door to the spring mechanism, providing the necessary tension to balance the door's weight during operation. 

Signs that you might need to replace the Door Cable include the door suddenly dropping open or being difficult to raise, indicating a break or excessive wear.  

Symptoms of a bad Door Cable include:

• The dishwasher door slamming open or requiring extra force to close.
• Unusual noises when opening or closing the door, suggesting the cable is not running smoothly.
• Difficulty in keeping the door partially open, affecting loading and unloading dishes.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Tube is an OEM part for GE dishwashers. This tube is responsible for carrying wastewater from the dishwasher to the household drain, ensuring efficient and effective removal of dirty water during and after the wash cycle. The drain tube helps maintain the dishwasher's performance by preventing water from pooling inside the appliance.

Over time, drain tubes can become clogged, cracked, or worn out due to regular use or debris buildup. Common causes of a bad drain tube include blockages from food particles, mineral deposits, wear and tear from frequent use, or damage from improper installation or handling.

Symptoms of a bad drain tube include:

• Water not draining from the dishwasher
• Leaks around the dishwasher area
• Unpleasant odors due to standing water
• Visible cracks, splits, or kinks in the tube

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Flood Switch is an OEM part for GE dishwashers. This critical component detects and prevents potential overflows by monitoring water levels within the dishwasher. When excessive water is detected, the flood switch signals the dishwasher to shut off water flow, preventing leaks and potential water damage.

Causes of a bad flood switch can include electrical failures, physical damage from debris, or wear and tear from repeated use. If the flood switch malfunctions, it may not properly detect water levels, leading to possible overflows or improper operation of the dishwasher.

Symptoms of a bad flood switch include:

• The dishwasher stopping mid-cycle
• Water not filling or overfilling the dishwasher
• Error codes related to water level issues
• Leaks around the dishwasher

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Electronic Control Board Jumper Wire is an OEM replacement part for GE dishwashers.

Causes of a faulty jumper wire include fracturing of internal interconnects from normal circuit board flexing during door closes. Overly aggressive cleaning solvents may also damage wire insulation over time.

Symptoms of a problematic jumper wire include:

• Intermittent or unreliable operation of wash cycle features
• Unresponsive touch controls and inability to start cycles
• Error codes displayed and failure to detect cycle outputs

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Silverware Basket is an OEM replacement part for GE dishwashers. Located on the lower rack, it provides designated storage for silverware during wash cycles. This basket helps prevent tangling and scratches on flatware.

Causes of needing a replacement basket include broken or worn prongs that no longer separate pieces properly. Loose or missing basket attachment clips can also result in the basket sliding around excessively during the wash.

Symptoms of a faulty basket include:

• Silverware tangling together or rubbing against other items
• Scratches developing on knives or tines of forks due to movement
• The basket detaching entirely from the lower rack during spinning

This is a genuine OEM part that works for some models of GE, and Hotpoint models.