Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the drum baffle (lifter vane) to your washer drum. Replace missing, stripped, or loose screws to keep baffles firmly attached and prevent rattling.
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy Read more
Washer won't spin or makes loud whining noise? The drive motor powers drum rotation. Moderately difficult repair, takes 30-60 minutes. Video guide available.
I watched videos on the website and took it apart. Put new motor on, also I put new belt even though the original belt was still ok, but I saw a little sign of shredding ...and there! !! It works like brand new washing machine. . Thanks to appliancepartspros.com...It made save a lot of money by doing it myself.. Read more
Seals washer tub halves to prevent leaks between drum sections. Replace if leaking onto floor or between shell halves. Confirm fit with model number.
Took the machine apart and found 2 leaks. Drum was leaking and a hose had a hole in it . Read more
Washer won't start, shows error codes, or cycles randomly? The main control board manages all wash functions. Moderate DIY repair with careful handling.
After first doing a Google/YouTube search, There was only one "hit" on my search results. Next I went to an appliance message board forum but after almost a week and more than a dozen views, no response was received. This is unusual. I've been on this board before with positive results. They also changed the "rules" for DIYers which could explain why I didn't have a lot of response from the experts. I attempted to get the unit into diagnostics mode. I was unable to clear the E90 "general... Read more
Seals hot and cold water connections to your washer's dispenser. Replace if you notice leaking at the inlet assembly. Confirm fit with your model number.
Water was accumulating in the drawer pedestal, it was leaking from the front of the washer so I thought it was the front door seal. I also noticed it would leak even when the washer was not being used so I doubted it was the door seal. I googled the leak problems and watched a few videos which gave me confidence on washer disassembly. With the top panel off I noticed the leak coming from the water inlet assembly. Appliance Parts Pro’s had the part and replacement video and I replaced the part... Read more
Carries wastewater from your washer's drain pump to the standpipe or sink. Replace if cracked, kinked, clogged, or leaking to restore proper drainage.
Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible... Read more
Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.
New hose and clamp. Read more
Washer won't start, stops mid-cycle, or shows error codes? The control board manages all functions. Moderate DIY repair restores full operation.
Hi, it's me again. So I learned a valuable appliance repair lesson when trying to fix this washing machine: don't fix something until you figure out why it broke in the first place! The first speed control board died (fixed with my last story on year) and I assumed it was just a cheap part of something, but I was in fact proved wrong when, to my dismay, the new board died a week or so later. Being the self-appointed washing machine expert I became after the last repair, I got right into the... Read more
Fix E32 error codes or washer stopping during fill with this water level pressure switch. Senses water level and controls fill cycles. DIY-friendly repair.
The E32 diagnostic code that the Frigidaire washer was throwing after a quick water fill attempt was not in the supplied Data Sheet that came with the washer and Frigidaire would not provide and updated Data Sheet because, "it's a liabiliity issue" was their statement, but they did tell me that the problem was in the Fill Pressure Sensor/Wire Harness or the Main Control Board (the display board). I ordered the Pressure Sensor and Main Control Board from AppliancePartsPros after checking... Read more
Shipping bolt kit secures washer tub and suspension during transport. Install before moving to prevent internal damage, then remove before use.
Ordered a shipping support kit from AppliancePartsPro.com, got it shipped next day, and installed the kit in less than 5 minutes to prep front loading washer for immediate moving. Read more
Washer drum baffle mounts inside the tub to lift and tumble laundry. Replace if cracked, broken, or missing to prevent snags and restore quiet operation.
Removed old baffle. Had to cut it out with a multi-purpose tool. Replaced with new one. Job was not too bad, and only took about 15-20 minutes. The best part was the fast delivery time for the part. Ordered the PM of one day, and had it in the early morning of the next day. (OUTSTANDING!!!) Read more
Replaces stripped, rusted, or missing #10-16 screws that secure cabinet panels, brackets, and internal components in washers and dryers.
Ordered parts from appliancepartspros.com then saw the video they made on replacing door. Then completed door within 30 minutes. Very easy and fast thanks to parts pros video! Read more
Fix a washer that won't fill, leaks when off, or has no cold water with this water inlet valve. Controls hot and cold water flow to the tub. DIY-friendly.
I put in a new water valve Read more
Replace your cracked, rusted, or missing front access panel. Installs at the bottom front of the washer to cover internal wiring and components.
Watched the video a few times for door boot seal replacement. It was a lot of help! The spring is the hardest to replace and I did enlist the help of my wife. Everything went back on great. If you have to replace the front panel (with the buttons) be mindful that the buttons are spring loaded and will come out. I did not lose any and it went back together just fine. A little touch up paint on the washer and it all looks brand new and works great. And the parts came in quicker than... Read more
Replacement mounting screw for washers and laundry centers. Secures components like pulleys, brackets, and panels. Replace if missing, stripped, or damaged.
New parts ordered and installed. Hooked everything back up and she's running like a stealth bomber over North Korea.. completely silent Read more
Machine screw secures panels, brackets, and internal components in washers. Replace missing, rusted, or stripped screws to restore proper fit and alignment.
I ordered new latch and 2 new screws ( imagine not having the screws). I put latch in place and with a phillips screw driver attached 2 screws. Tada works like new. If the owner would have just done this herself, I wouldnt have a new set of infinity front loaders for under $300. So thrilled that I can get replacement parts for my appliances. Read more