Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Torsion Spring is an OEM part for GE refrigerators. It is essential for maintaining the proper tension and operation of the refrigerator door. This spring ensures the door closes smoothly and stays securely shut, preventing cold air from escaping and maintaining the appliance’s efficiency.
Causes of a bad torsion spring can include metal fatigue from regular use, corrosion from exposure to moisture, or damage due to excessive force or mishandling. Over time, these factors can weaken the spring, affecting the door’s performance.
Symptoms of a bad Torsion Spring include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced springs, flapper assembly and ice door retainer as described in videos and it was easy. So far so good..water dispenses. Read more
The Refrigerator Damper and Gasket Assembly is an OEM replacement part for GE refrigerators. It includes a moving damper plate that regulates airflow through vents, as well as its surrounding sealing gasket. Symptoms of a bad assembly include:
Causes of a bad assembly can be worn over extended use, cracks forming in the damper component itself, or a degraded gasket failing to seal properly. This genuine GE replacement is compatible with additional GE refrigerator brands including Hotpoint and RCA.
Replaced the damper and gasket assembly and the refrigerator is working like a charm. The package was shipped and I received it in a day and a half! Great service; I will definitely use again if the need arises. Read more
The Dispenser Drip Tray is an OEM part for GE refrigerators. It's placed beneath the water and ice dispenser to catch drips and spills, preventing water from running down the front of the refrigerator or onto the floor. This part not only helps in keeping the dispensing area clean but also minimizes the risk of slip hazards caused by wet floors.
Over time, the dispenser drip tray can become stained, cracked, or warped, affecting its appearance and functionality.
Symptoms of a bad Dispenser Drip Tray include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Was an easy swap. Ordered the pieces, got them withing two days. Didn't realize a hair dryer would melt so much of the plastic pieces that I couldn't even see while trying to defrost the water line in the door. Next time it happens I will just empty the freezer and leave the door open for a few hours. Will save me from making this mistake again. Thankfully easy to replace the parts myself and not too expensive. Read more
The Front Roller Assembly is an OEM part for GE refrigerators. It's designed to support the front part of the refrigerator, allowing for smooth and easy movement when you need to shift the appliance for cleaning, maintenance, or repositioning. This roller assembly ensures the weight of the refrigerator is evenly distributed, reducing strain on the floor and making it easier to move the refrigerator without damaging the flooring or the appliance itself.
Causes of a bad Front Roller Assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or corrosion over time.
Symptoms of a bad Front Roller Assembly include:
Replacing the roller assembly corrected the problem. The key to replacing the roller assembly is elevating the refrigerator high enough to remove the roller assembly. (1) Raise and secure the refrigerator, (2) remove the metal bar across the bottom of the refrigerator to provide adequate access to the roller assembly (2-screws), (3) remove the roller assembly adjustment screw, (4) pry the roller pivot pin out, (5) pull the roller assembly toward the front of the refrigerator to remove, (6)... Read more
Ordered the new shelf from Appliance Parts Pros, which was a genuine OEM part and much less expensive than the GE Store. Lifted the old shelf out, popped the new one in and it was done. two minutes. Read more
First I ordered a new ice door seal, spring, and crank, figuring the condensation in freezer and door was caused by ice door not sealing. Turns out the solenoid for the ice door was completely rusted and was the primary cause, if it had been replaced early, it would have saved the dispenser board. What then happened was the moisture in the freezer door damaged the control board rendering dispenser controls inoperative as well as the heater around the dispenser. Now the freezer door is dripping... Read more
I ordered the upper and lower cam riser, replaced them, and adjusted the door and the door works great. I've bought many parts in the last 10 years from AppliancePartsPros for this 20-year-old side-by-side refrig. Still works great. Thanks, ED Read more
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more
Replaced Ice maker very easy. Read more
Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly. Read more
Color: white. It measures about 16.5 inches wide by 4 inches high by 5.5 inches deep.
Replaced shelves Read more
I had 2 parts that were cracked, so after changing the cracked parts as well as the dispenser switch, it was back to working normally. Simple to make the needed repairs and the videos provided on your website really helped in being prepared. Read more
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward. Read more
This is the front rail for a freezer door shelf. It replaces a cracked or missing retainer so items stay securely on the door, restoring usable storage and helping prevent jars and packages from sliding out.
Color: White
I had to disassemble the ice bucket, there were three screws to remove the cover, one screw and a tension spring that holds the bar in place that controls ice cubes from crushed ice. The hardest part was removing the plastic chamber where the ice crushing blades are attached to the auger, I had to use a couple of butter knives to spread the outer ice bucket away from the inner ice chamber because they had those funky plastic lock-in tabs that lock the ice chamber in place to the ice bucket. I... Read more
Pulled broke one out replaced with new one. Read more