Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Burner won't stay at set temperature or jumps to high? The infinite switch controls power to heating elements. Easy DIY repair, takes under 30 minutes.
Swapped old with new. dead easy and fast delivery of part helped: good service, thank you . Read more
Range clock or timer not working? This control board restores display and cooking time functions. DIY-friendly with video guide. Fits electric and gas ranges.
Removed the front off the back panel, unplugged the old unit. Then using a blow dryer heated the old timer to peel the face /cover off and applied to the new clock. Plugged in the replacement clock. Replaced the front of the range. The only complaint I have is we were not informed that a new face would not be included and the old one would have to be removed and applied to the replacement clock. The face that was on the orginal clock has the buttons to set the clock and timer reversed from... Read more
Chrome drip pan installs under range burners to catch spills and splatters. Replace when rusty, discolored, or worn to restore kitchen appearance.
Slipped the old ones out, slid the new ones in. So simple, even my husband could do it! Read more
Burner not heating or heating unevenly? This 6-inch surface coil element restores consistent heat to your range's small burner. Simple plug-in install.
Ordered new heating coils for stove Read more
Broiler won't heat or stays cold? This range broil element restores high-heat broiling. DIY-friendly repair, typically takes 20 minutes to replace.
I ordered a broiler element, watched the video and replaced the element when it arrived. I turned off the electrical breaker to the stove/oven. I then removed the oven door from the hinges and removed the 1/4" square head screws that secured the element in place,( the video showed phillip head screws ), removed the element wires from the old element. Replaced the element wires to the new element and reattached the element to the oven with the hex head screws. I then put the oven door back on... Read more
Catches spills and crumbs under electric range burners. Replace if rusted, discolored, warped, or cracked to restore your cooktop's appearance.
Plastic support guide that mounts to the rear of your range storage drawer. Replace if cracked, broken, or missing to keep drawer aligned and gliding smoothly.
It was so easy to fix just undo the screw place and put the screw back on. Read more
Indicator light that illuminates when burners or oven are active. Replace if it stays on constantly or fails to light. Verify fit with your model number.
Insulation wrap installs around the oven cavity to maintain heat and protect cabinetry. Replace if damaged, contaminated by pests, or missing sections.
Removed stove top then removed burner pan. Took out insulation on the top and sides of the oven. Cleaned top of oven well and replaced old insulation with the new blanket purchased from applianceParts pros. Read more
Right-side drawer glide supports and guides your range's lower drawer for smooth operation. Replace if broken, cracked, or worn to restore alignment.
Ordered the part, unscrewed the one screw holding it on. Screwed the new one on. It took less than 5 minutes. Bought the left side too because I figured that one would probably break soon Read more
Fix a burner that won't heat with this range surface burner element. Simple plug-in installation takes minutes. Compatible with multiple models.
Ordered the burner and it arrived and I simply plugged into the receptical and mission accomplished Read more
Black trim piece that installs at the bottom edge of your range oven door. Replace if cracked, rusted, broken, or missing to restore appearance.
I lifted up the door and removed it. Next, I laid out newspaper on the floor. I placed the door on the newspaper upside down. With my socket driver, I removed the bottom door trim. I then used a pocket knife to remove the remaining glass in the top groove. I then slid in the new glass and reinstalled the trim. It took 30 minutes to replace the glass and clean up the glass fragments from the previous door glass. I looked up a video on how to replace it Utube. Personal safety equipment - Safety... Read more
Burner won't heat or overheats? This infinite switch controls surface element temperature. Easy DIY repair in under an hour for 6-inch burners.
Talked to a representative at your company they said it was probably the infinite switch. I purchased all four switches, replaced all four burner switches. Very easy to do. In less than an hour to replace all four. Read more
Hex head mounting screw for ranges and ovens. Secures elements, panels, and internal components. Replace if stripped, missing, or damaged during repairs.
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy. Read more
Replace your oven door gasket when it becomes brittle, cracked, or no longer seals properly. Restores heat containment and energy efficiency. Confirm fit.
Remove the 2 screws that connects oven incert to frame. Slide incert outf .5 inch. Removed old seal and replaced it with new seal. Pushed incert back into frame. Screwed the 2 screws back into place. Read more
Replaces cracked, shattered, or heat-damaged inner glass pane in your range oven door. Restores insulation, visibility, and protects from spills.
We were renting a vacation house on the bay and discovered that the oven door inner glass was broken. (There are two glasses inside the glass oven door. Only one was broken.) AppliancePartsPro tech support was fast and efficient on the phone; part arrived via FedEx and on time. The oven door glass replacement was easy. I needed a T-25 screw driver for the screws inside the door. I used a stainless steel scrub pad to clean the existing glass - no scratches. Looks like BRAND NEW! Thank you... Read more