Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Adjustable leveling leg that stabilizes and balances your range. Replace if cracked, broken, bent, or threads are stripped from wear or impact damage.
The problem was partly caused because the original legs were at full extension. The replacement legs were longer than the originals and were more secure at the needed length. One difficulty was that the threaded base plate where the legs screwed in had been damaged and had to be reshaped, I was able to reshape the sockets with some effort, to allow the legs to thread in, though one remained slightly angled. (A metal tool of some type which could be threaded in and used to bend the socket area... Read more
Left-side oven door hinge that supports and controls door movement. Replace if hinge is cracked, broken, or door won't close flush, allowing heat to escape.
The replacement hinge unit arrived in just two days. The JennAire (Maytag) oven door is fairly typical in that it easily lifts off of the hinge bars. Once the door is off then removing two screws is all that's required to remove the hinge unit from the oven. The new hinge slides up into place and while you hold it up inside of its location putting the old screws back in is very easy. After sliding the door back down onto the hinge bars the oven is as good as new Read more
Replacement mounting screw for washer drum baffles. Secures baffles to drum interior. Order if original screw is stripped, lost, or corroded during repair.
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more
Burner head mounts on your cooktop to distribute gas evenly for a steady flame. Replace if cracked, worn, or damaged to restore proper flame pattern.
In an attempt to clean the range from the grease-gunk build-up, I had to remove the burner heads. Unfortunately, the 2 most used burner heads had immovable screws that locked them into the orifices underneath. After numerous hours in attempts to salvage the old burner heads and orifices attempting to remove the immovable screws, I gave up. Checked Maytag's website for parts and found nothing. Turned to AppliancePartsPros.com and found the correct parts for reasonable price in a matter of... Read more
Burner head for gas ranges and cooktops. Distributes gas evenly to create a proper flame. Replace if cracked, damaged, or clogged with buildup.
Replacement mounting screw for securing range panels, brackets, and internal components. Replace missing, stripped, or rusted screws to restore fit.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.
Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more
Chrome oven rack measuring 21 inches wide by 17 inches deep. Replace your cracked, rusted, worn, or missing rack. Installs in upper oven cavity.
No work needed. Read more
Auxiliary burner head for gas ranges and cooktops. Mounts over the orifice to distribute gas through precision ports. Replace if clogged or damaged.
Double-sided foam tape seals oven door glass on gas ranges. Replace when reinstalling door glass or if seal is worn. Verify fit with your model number.
I ordered a new door glass from appliancepartspro.com it came within two days, but I forgot to order the 8 pieces of foam tape, assuming it would also be included in with the order, it wasn't, so after waiting for that to arrive, it was fairly easy, job after watching the video. However, the video doesn't tell you the painted side goes on the inside, or that the single sided foam tape goes on the top, and the double sided foam tape goes on the sides, I figured that out from the diagram on my... Read more
Fixes weak flame or ignition failure on 12K burners. This orifice holder restores proper gas flow when clogged or damaged. Moderate DIY repair.
The top had to be removed but with the unit being 14 years old, galvanic corrosion had seized the screws holding the Burner Heads to the Orifices. I carefully drilled out the heads of the screws until the Burner heads could be pulled free. I removed the two screws that held the Burner control assembly with all the gas valves in place. If you open the top oven, there are two last screws that thread straight up into the top. So 14 screws in all. I ordered 10 new screws along with the Orifices... Read more
Burner won't ignite or flame is weak? This orifice holder aligns the burner orifice and electrode for reliable ignition. Moderate DIY, 30-60 minutes.
Anti-tip bracket bolts to the floor behind your range to prevent tipping. Replace if missing, bent, or damaged during moving or installation.
Part arrived quickly and was an easy install1 Read more
Burner won't spark or ignite? This surface burner ignition switch triggers the spark module when you turn the knob. 45-minute DIY repair for ranges.
Replaced switch assembly Read more
Factory black screw that secures panels, trim, or brackets on your oven. Replace missing, stripped, or damaged fasteners to restore secure fit.
Turned off breaker,unscrewed (2 screws) element,pulled element out from back of oven,unplugged 2 wires, attached wires to new element, pushed back in, installed retaining screws Read more
Restores a tight seal between your oven door and frame to prevent heat loss and maintain accurate cooking temperatures. Replace if worn or damaged.
Replaced the gasket. Very easy and only a few minutes. Read more