Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Water Inlet Valve is an OEM part for LG dishwashers. This part regulates the flow of water into the dishwasher tub during the fill cycle, ensuring the proper water level for effective cleaning.
Causes of a bad part can include sediment or mineral buildup obstructing the valve, physical damage from water pressure or impact, or electrical malfunctions preventing the valve from opening and closing correctly.
Symptoms of a bad Water Inlet Valve include:
This OEM LG part is also compatible with some Kenmore models.
The insulation in my old Ohio house is terrible, and the Valve Assy, Inlet part under my dishwasher must have froze and burst when the temperature outside got below 0. I ordered this part here, and literally got it the next day. Awesome. The how-to video on the site was perfect. Not only did I replace the part in about an hour, but I saved ~$200 by canceling my LG service repair appointment. Read more
This door gasket forms the airtight, watertight seal around the dishwasher tub opening. A fresh, pliable seal helps prevent leaks, reduce noise, and ensure proper wash performance by keeping water and steam inside the cabinet.
Replaced tub gasket around interior of washer tub. Read more
The Check Valve is an OEM part for LG dishwashers. It prevents the backflow of water into the dishwasher, ensuring that water only flows in the intended direction. This helps maintain the efficiency of the washing cycle and prevents contamination of clean dishes.
The check valve can fail due to reasons such as wear and tear, blockage from debris or hard water deposits, or damage from high water pressure. Over time, the internal components can degrade, leading to improper sealing.
Symptoms of a bad check valve include:
This OEM LG part is also compatible with certain models of Kenmore dishwashers.
So all of a sudden the dishwasher stops working, "0E error"on the panel. Did some google searches and found that it might be the filter, which I did not know needed to be changed, or worse, the motor. Took the filter off per online tutorial (easy) and mopped up all the stagnant water. Poking around, I find the small rubber check valve that has broken. Had to fish it out with tweezers. Long story short, it was not the motor and I doubt it was the filter. It was this $1.87 rubber drainage... Read more
Detergent and rinse aid dispenser
The Float Assembly is an OEM replacement part for LG dishwashers. It is a sensor located inside the dishwasher that monitors water levels during wash cycles. The float assembly precisely indicates water levels to the control system to determine adequate water is available throughout the cleaning and rinsing functions. Proper water level detection is crucial for achieving sparkling clean dishes. Causes of a faulty float include mineral buildup on sensors overtime, cracks or leaks developing, and damage to electrical wiring from impacts. Symptoms of a bad float assembly include:
This OEM LG part is also compatible with some Sears/Kenmore models.
I bought a new controller first and installed it. The exact replacement controller was no longer available and I had to modify two AC connectors that changed from 3 pins with two wires to two pins with two wires. This was not expected but I made it work just fine by getting the three pin connectors on the cable to fit the two pin by breaking out the center web in the board two pin and then shaving off the raised key plastic on the wires. Then on power up, I found that the wash motor did not... Read more
The Upper Spray Arm is an OEM part for LG dishwashers. This part is located at the top of the dishwasher tub, responsible for spraying water and detergent onto the upper rack of dishes during the wash cycle.
Causes of a bad Upper Spray Arm can include mineral buildup or debris clogging the spray holes, physical damage from impact or foreign objects, or wear and tear over time.
Symptoms of a faulty Upper Spray Arm include:
I replaced the upper nozzle guide, nozzle shaft and upper spray arm. I also replaced the pump gasket for good measure. Top rack dishes had not been cleaning properly. I first removed the filter assembly to inspect the main pump from above. It was clogged but after cleaning and reassembly I observed that while middle and bottom spray arms were changing position, the upper spray arm was not. I confirmed that water was flowing through the upper spray arm by placing some empty yogurt pots on a... Read more
Incudes latch and safety switches.
The Check Valve is an OEM part for LG dishwashers. This component plays a crucial role in preventing backflow of water into the dishwasher, ensuring proper drainage and efficient operation during the washing cycle.
Causes of a bad check valve can include clogging due to food particles or debris, wear and tear over time, or damage from exposure to harsh chemicals or high water pressure. These factors can compromise the valve's ability to function correctly, leading to issues with water flow.
Symptoms of a bad Check Valve include:
This OEM LG part is also compatible with Sears/Kenmore.
First determined drain discharge hose was clear. Turned of power to dishwasher. I did not find it necessary to remove the dishwasher. I simply removed the lower service panel at the floor and was able to easily remove the defective pump, unplug it, replace the small rubber check valve flapper before the pump inlet and reinstall the new pump assembly. The dishwasher surprisingly cleans and runs quietly like new again although I found no excuse for the pump failure as it is well designed. Never... Read more
This door hinge spring counterbalances the dishwasher door so it opens smoothly and stays where you set it. Replace a weakened or broken spring to restore proper door tension and prevent the door from dropping or slamming.
I did not know which part broke, but it was very obvious once I moved the Dishwasher out of the cabinet. The "cable" is nylon cord, so I imagine this would be sacrificial part on every machine. Read more
The Noise Filter Assembly is an OEM part for LG dishwashers. It is designed to reduce electrical noise and interference that can affect the dishwasher's operation. The noise filter helps ensure that the electronic components function smoothly and without disruption, contributing to the overall efficiency and reliability of the appliance.
Causes of a bad noise filter assembly can include electrical surges, wear and tear over time, or damage due to moisture or physical impact.
Symptoms of a bad noise filter assembly include:
Replaced noise filter. Read more
The Upper Spray Arm Pivot Shaft is an OEM part for LG dishwashers. This part allows the upper spray arm to rotate and distribute water evenly throughout the upper rack during the washing cycle.
Causes of a bad part can include wear and tear over time, damage from foreign objects, or improper installation or alignment.
Symptoms of a bad Upper Spray Arm Pivot Shaft include:
This door-mounted assembly stores detergent and rinse aid and releases them at the proper time in the wash cycle. Replace a cracked or non-dispensing unit to restore consistent detergent release and overall wash performance. What it does:
I ordered a new vario motor and a soap dispenser. I turned off the water and the breaker, disconnected the water line and the power at the front base of the unit, disconnected the drain hose from the garbage dispenser, and pulled out the dishwasher and laid it on a blanket on its face. I unscrewed and removed the plainly visible vario motor on the bottom of the machine and removed the cam from the shaft. I then used a needle nose plier to carefully turn the D-shaft on the new motor to exactly... Read more
The Rack Holder is an OEM part for LG dishwashers. This component is designed to fit on the dishrack and functions as an attachment point for the roller wheels. It facilitates smooth movement of the dishrack in and out of the dishwasher.
Over time, the rack holder can wear out or become damaged due to regular use, heavy loads, or accidental impact. Corrosion from moisture exposure or broken clips can also affect the holder's performance.
Symptoms of a bad rack holder include:
Causes of a bad rack holder can include wear and tear from regular use, physical damage due to heavy or improperly loaded racks, and corrosion or rust from prolonged moisture exposure.
This OEM LG part is also compatible with Sears/Kenmore models.
Phillips head screwdriver was all I needed. Saw a few videos on youtube. Read more
This lower spray arm (nozzle assembly) mounts at the bottom of the tub and spins to deliver pressurized wash water across dishes. Replacing a cracked or clogged arm restores even spray coverage and helps resolve poor cleaning results.
Replaced the parts per my order Read more
This nozzle assembly directs high-pressure wash water through its jets for even cleaning inside the dishwasher. Replacing it restores consistent spray coverage and wash performance. What it does:
These top mounting brackets secure the dishwasher to the underside of the countertop to prevent shifting or tipping during use. Replace bent or missing brackets to maintain a stable, safe installation.
I ordered new brackets to replace the broken ones. With the new brackets the instructions also showed me how I could also secure the dishwasher to the counter from each side. I replaced the brackets and secured the dishwasher to each side of the cabinets. The dishwasher is more secure now then ever. Read more