Lghb2867pe Parts

The User Interface is an OEM part for Frigidaire refrigerators. This control panel allows users to select and adjust settings, monitor the refrigerator’s status, and receive feedback on its operation. The user interface is crucial for managing various functions such as temperature control, ice and water dispensing, and other customizable settings.

You should replace the user interface if it becomes unresponsive or damaged. Causes of a bad user interface can include regular wear and tear from frequent use, exposure to moisture or electrical surges, or physical damage from impacts or mishandling. These issues can lead to the control panel malfunctioning or becoming completely unresponsive.

Symptoms of a bad user interface include:

• Buttons or touch controls not responding
• Display not showing correctly or remaining blank
• Inconsistent or incorrect temperature readings
• Error codes or malfunction messages appearing frequently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Door Gasket Clips are OEM parts for Frigidaire refrigerators. These clips secure the door gasket in place, ensuring a tight seal to maintain the internal temperature and prevent cold air from escaping. This pack contains 40 clips, which secure the interior trim pieces and hold the gasket and liner to the freezer lid.

Over time, the gasket clips can become damaged or worn out due to frequent opening and closing of the refrigerator door, exposure to moisture, or accidental impacts. If the clips fail, the door gasket may not stay in place, compromising the refrigerator's efficiency.

Symptoms of bad refrigerator door gasket clips include:

• The door gasket not staying securely in place
• Visible damage or wear on the clips
• Cold air escaping from around the door
• Increased energy consumption due to poor sealing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Rail, Crisper Cover, LH Side is an OEM part for Frigidaire refrigerators. This rail supports the left-hand side of the crisper cover, allowing it to slide in and out smoothly. It helps maintain the stability and functionality of the crisper drawer, ensuring easy access to stored fruits and vegetables. Wheel not included, use part number AP6230456

Causes of a bad crisper cover rail can include regular wear and tear, heavy loads causing stress on the rail, or accidental damage from removing or inserting the crisper drawer. A damaged rail can lead to difficulties in opening or closing the crisper drawer properly.

Symptoms of a bad crisper cover rail include:

• The crisper drawer not sliding smoothly or getting stuck
• The crisper cover being unstable or misaligned
• Visible cracks or damage to the rail
• The crisper drawer falling out of place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Handle Screw is an OEM part for Frigidaire refrigerators. This screw secures the door handle to the refrigerator door, ensuring a firm and stable grip for opening and closing the door.

Causes of a bad door handle screw can include regular wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or stripping. A faulty screw can lead to a loose or wobbly door handle, making it difficult to operate the refrigerator.

Symptoms of a bad door handle screw include:

• The door handle feeling loose or coming off
• Difficulty in securely tightening the handle
• Visible rust or corrosion on the screw
• Stripped threads on the screw or handle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Solenoid and Yoke Assembly is an OEM part for Frigidaire refrigerators. It is used in the ice dispensing system to control the movement of the ice chute, allowing ice to be dispensed from the refrigerator door.

Causes of a bad solenoid and yoke assembly can include electrical issues such as a burnt-out solenoid, wear and tear from regular use, or physical damage due to mishandling or impact.

Symptoms of a bad solenoid and yoke assembly include:

• Ice not dispensing or dispensing intermittently
• Strange noises when attempting to dispense ice
• The ice chute not opening or closing properly
• Error codes related to the ice dispensing system

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Ice Maker is an OEM part for Frigidaire freezers. It is responsible for producing ice within the freezer compartment, providing a steady supply of ice cubes.

Causes of a bad ice maker can include wear and tear over time, issues with the water supply line, or electrical problems affecting the ice-making cycle.

Symptoms of a bad ice maker include:

• The ice maker not producing ice
• Ice cubes being smaller or misshapen
• Unusual noises coming from the ice maker
• Water leaks around the ice maker area

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Defrost Thermostat is an OEM part for Frigidaire refrigerators. This component monitors the temperature of the evaporator coil and triggers the defrost cycle when necessary. By ensuring that the evaporator coil is kept free of ice buildup, the defrost thermostat helps maintain efficient cooling performance and prevents frost accumulation inside the refrigerator.

Over time, the defrost thermostat can fail due to electrical issues, wear and tear, or temperature fluctuations. A malfunctioning thermostat can lead to excessive frost buildup, reduced cooling efficiency, and potential damage to the refrigerator's components.

Symptoms of a bad defrost thermostat include:

• Excessive frost buildup in the freezer
• The refrigerator not cooling properly
• The defrost cycle not activating
• The refrigerator running continuously without cycling off

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Defrost Heater is an OEM part for Frigidaire refrigerators. This component is responsible for melting away frost and ice that accumulate on the evaporator coils during the refrigerator's cooling cycle. The defrost heater activates periodically, ensuring that air flow remains unrestricted and the refrigerator can efficiently maintain its set temperature. 

Causes for replacement can include a burnt-out heater element, damage to the wiring, or a malfunctioning thermostat that fails to initiate the defrost cycle. These issues can lead to reduced cooling efficiency, increased energy consumption, and potential spoilage of stored food due to fluctuating temperatures.

Symptoms of a bad Defrost Heater include:

• Frost and ice accumulation on the evaporator coils beyond normal levels.
• The refrigerator or freezer sections are too warm due to blocked air flow.
• The refrigerator is cycling on more frequently or for longer durations

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Evaporator Fan Motor is an OEM part for Frigidaire refrigerators. It circulates air over the evaporator coils and throughout the refrigerator and freezer compartments, ensuring even cooling and maintaining the desired temperatures.

Causes of a bad evaporator fan motor can include general wear and tear over time, electrical failures such as shorts or blown fuses, or physical damage from ice buildup or debris.

Symptoms of a bad evaporator fan motor include:

• Refrigerator or freezer not cooling properly
• Unusual noises coming from the freezer compartment
• Frost buildup on the evaporator coils
• Inconsistent temperatures within the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Maker is an OEM replacement part for Frigidaire French doors and side-by-side refrigerators. It automatically produces batches of fresh ice for daily use.

Symptoms of an issue include:

• Reduced or discontinued ice production
• Ice cubes fused or stuck together
• Water or moisture inside the refrigerator

Causes can be mineral or scale buildup inhibiting parts, or damage from opening the refrigerator door before harvest is complete. Other causes involve mold growth or freezing of internal components over time.

Compatible with Gibson and Electrolux refrigerator models as well, it maintains a constant ice supply.

The Control Board is an OEM replacement part for Frigidaire refrigerators. This component serves as the brain of the appliance, managing and coordinating various functions such as temperature control, defrost cycles, and the operation of fans and compressors. A functional control board ensures the refrigerator maintains optimal performance and energy efficiency.

Control boards can fail due to power surges, electrical issues, or normal wear over time. A malfunctioning board can disrupt the refrigerator's functionality and impact its ability to preserve food effectively.

Symptoms of a bad control board include:

• Inconsistent or incorrect temperatures in the refrigerator or freezer
• Unresponsive controls or display panel issues
• The refrigerator not cooling or running continuously
• Error codes or unusual noises during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Crisper Cover Rail is an OEM replacement part for Frigidaire refrigerators. Located inside the fresh food compartment, this plastic rail securely guides and supports the right side of the crisper drawer's hinged cover.

Causes can be breakage from repetitive drawer movements over years of use. Normal wear may also cause loss of the rail's stabilizing function.

Symptoms of a faulty rail include:

• The crisper cover becoming loose or misaligned when opening/closing
• Difficulty fully closing or fastening the cover securely
• Damage to the adjacent cover frames from improper rail alignment

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore ranges.

The Dispenser Auger Motor is an OEM part for Frigidaire refrigerators. It powers the auger that dispenses ice from the ice maker through the dispenser chute, ensuring smooth and efficient delivery of ice to the user.

Causes of a bad auger motor can include electrical issues, wear and tear from regular use, or mechanical failure. A malfunctioning auger motor can prevent ice from dispensing properly, impacting the overall functionality of the ice maker.

Symptoms of a bad dispenser auger motor include:

• The ice dispenser not dispensing ice
• The auger not turning or making unusual noises
• The dispenser motor not responding when activated
• Ice jams or blockages in the dispenser chute

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Ice Maker Cooling Fan and Gasket Kit is an OEM part for Frigidaire refrigerators. This kit includes both the cooling fan and the necessary gasket, which work together to ensure the ice maker operates efficiently. 

Causes of a bad cooling fan can include electrical issues, wear and tear from continuous use, and blockages or debris impeding the fan's operation. 

Symptoms of a bad ice maker cooling fan and gasket include:

• Reduced ice production or no ice being made
• Ice melting or clumping together
• Unusual noises coming from the ice maker area
• Visible wear, cracks, or gaps in the gasket

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This part number contains one (1) screw.

The Bin is an OEM part for Frigidaire refrigerators. This bin is designed to fit inside the refrigerator door, providing a convenient storage space for items such as beverages, condiments, and smaller food items.

Causes of a bad bin can include cracks or breaks due to heavy use, accidental dropping, or overloading with heavy items. Over time, plastic bins can also become brittle and prone to damage.

Symptoms of a bad bin include:

• Cracks or fractures in the bin
• Difficulty in fitting the bin securely in its designated place
• The bin not holding items properly or sagging under weight
• Visible wear or warping of the plastic

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.