Magicchef Hmbr350 Parts

This replacement support is the small bracket that holds and positions its mating component so it stays aligned and operates smoothly. Replacing a cracked or missing support restores proper fit, reduces rattling, and helps prevent premature wear. What it does:

• Secures an attached part in the correct position
• Maintains alignment and spacing to prevent rubbing or binding
• Helps reduce vibration, looseness, and noise from misaligned components
• Typical signs of failure: broken tabs, missing piece, loose or sagging part

• 1 support

• Disconnect power; shut off water supply if applicable
• Note the original orientation and location before removal; install the new support the same way
• Handle sharp panels and delicate plastic tabs with care to avoid damage
• Verify smooth operation of the supported component after reassembly

This replacement lamp restores illumination so you can clearly see inside your appliance. Replace a burned-out or damaged bulb to bring back visibility when the light switch is pressed or the door opens, depending on design.

• Provides interior illumination in the appliance compartment
• Activates with the door switch or dedicated light control, as designed
• Helps you see contents and monitor progress at a glance
• Common signs of failure: no light when activated, intermittent/flickering light, blackened glass, or a broken filament

• Disconnect power at the breaker or unplug the appliance before servicing
• Allow the bulb and surrounding area to cool before handling
• Handle the glass with clean gloves or a cloth to avoid oils that can shorten bulb life
• Use only the bulb type and wattage specified for your model; do not overtighten during installation

The Switch is an OEM component specifically designed for Bosch microwaves. It controls critical heating elements and fan functions through the direct user interface. Seamless button response allows convenient operation.

Symptoms of a faulty switch involve non-responsiveness or inaccurate reaction to control presses. Opening from wear over extended usage risks compromised performance warranting replacement. 

Causes of a bad switch include normal degradation inhibiting smooth movements. Exposure to moisture-increasing interior corrosion necessitates a change to restore full functionality.

Symptoms of a bad switch include: 

• Microwave fails to start or prematurely stops cooking cycles  
• Inaccurate power levels result in uneven heating
• Inoperative special features like popcorn do not engage

This OEM Bosch part is also compatible with some Thermador, Blomberg, and Miele microwaves. Replace to maintain dependable command of essential microwave functions.
 

This electrical switch restores reliable on/off signaling for a specific function in your appliance. Replacing a worn or burned switch helps ensure consistent activation and dependable operation of the affected feature. What it does

• Opens and closes an electrical circuit when actuated to start/stop a function
• Sends a clear signal to the control or power circuit for the selected operation
• Failure symptoms include the function not engaging, intermittent operation, or no response when actuated
• Visual clues can include darkened, melted, or loose terminals and an inconsistent click/feel

• 1 switch

• Disconnect power to the appliance before servicing; shut off water or gas if applicable
• Note wire positions and transfer connectors one at a time to the correct terminals
• Seat terminals fully and secure the switch without overtightening; avoid bending the actuator
• Test operation before final reassembly to ensure proper engagement

This switch is an electrical component that opens or closes a circuit inside your appliance. Replacing a worn or failed switch restores proper signaling to the control so the selected function responds reliably when actuated.

• Opens/closes an electrical circuit to send an on/off signal to the appliance's control or motor
• Enables the appliance to start, stop, or register a user input as designed
• Common symptoms: no response when pressed/activated, intermittent operation, feature stuck on/off, or error codes referencing a switch
• Resolves issues caused by heat, wear, moisture, or mechanical fatigue of the original switch

• Disconnect power at the breaker before servicing; verify power is off
• Note wire locations and take a photo; move connectors over one at a time to the new switch
• Do not force or bend terminals; replace any loose or heat-damaged connectors
• Restore power and test the function before final reassembly

This high-voltage transformer steps household power up to energize the magnetron, enabling proper heating in your microwave. Replace it if the unit powers on but doesn't heat, hums loudly, or intermittently blows a fuse.

• Supplies the high voltage needed for magnetron operation
• Common symptoms when failing: runs but no heat
• May cause loud humming, burning odor, or tripped breaker/fuse
• Visible overheating or damage on the transformer can indicate failure

• Unplug the appliance; the high-voltage capacitor can retain a dangerous charge
• Document wire locations and transformer orientation before removal
• Reuse original mounting hardware/brackets and secure all connections firmly

The Cooking Tray is an OEM part for Bosch microwaves. As the centerpiece of the microwave, the cooking tray ensures even cooking by rotating food items during the cooking cycle. It supports dishes and rotates continuously to evenly distribute microwave energy throughout recipes.

Causes of a bad cooking tray can include wear and tear due to extended use over time. Food splatter or spills left inside the microwave may damage or corrode the tray. Accidental dropping or cracking of heavier dishes placed on the tray can also cause issues.

Symptoms of a bad cooking tray include:

• The tray not spinning or rotating properly during cooking
• Unevenly or partially cooked food
• Loud grinding or scraping noises coming from the tray
• Cracks or breaks visible in the plastic surface

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This micro switch is a small, fast-acting on/off switch tripped by a mechanical lever or float to send a signal to the control. Replacing a worn microswitch restores accurate sensing so the appliance starts, stops, and runs when it should. What it does

• Senses the position of a linked mechanism (lever, float, latch) and opens/closes an electrical circuit
• Helps the control enable or disable functions only when conditions are correct
• Failure symptoms include intermittent operation, cycles that won't start, or a unit that keeps running until power is removed

• Disconnect power and, if applicable, shut off water before servicing
• Access the switch and note actuator orientation and terminal layout
• Move wires to the new switch one at a time to maintain correct placement; ensure tight connections
• Manually actuate the mechanism to ensure a positive "click" and proper operation before reassembly

This replacement cover closes and protects a designated opening or component in your appliance. It restores a secure fit and proper protection when the original cover is cracked, missing, or warped, helping maintain safe, reliable operation.

• Shields internal parts from debris and accidental contact
• Helps maintain the designed enclosure for correct performance
• Can reduce vibration or rattling caused by a loose or damaged cover
• Common symptoms: visible cracks, broken/missing tabs, loose fit, or the area left exposed

• Disconnect power and, if applicable, turn off water before servicing
• Access and fastener style vary by model; refer to your parts diagram
• Reuse original screws, clips, or seals unless you are replacing them
• Seat the cover evenly; ensure all tabs engage and avoid overtightening fasteners

The Frequency Filter is an OEM replacement part for Bosch microwave ovens. Located inside the control panel casing, it prevents electromagnetic interference between electronic circuits. The frequency filter ensures precise cooking settings by filtering out radio waves and high-frequency noise.

Symptoms of a faulty frequency filter include:

• Settings appearing arbitrarily changed or unresponsive  
• Error codes signaling control malfunctions
• Microwave failing to heat or function as anticipated
• Buzzing, crackling, or whining noises emitting from inside

Causes of a bad frequency filter typically involve failures over extended usage. Repeated filtering can degrade or displace sensitive parts interfering with operations. 

Replacing your frequency filter restores reliable cooking and cabinet protection. This genuine Bosch component prevents future issues. Compatible with Thermador, Gaggenau, and select Kenmore microwaves.

The Thermal Relay is an OEM part for Bosch wall ovens and microwaves. It automatically disconnects electrical power in response to high temperatures, protecting against potential fires. 

Causes can be standard wear over time, repeated excessive temperature exposure, or damage from liquid intrusion. Periodically testing relay response helps ensure proper safety shutdown.

Symptoms of a faulty thermal relay include:

• Oven/range failing to power on or off as intended
• Electrical burning smells coming from internal components
• Oven heating elements remaining continuously energized
• Tripped circuit breakers during normal appliance use

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This high-voltage capacitor stores and releases energy in the microwave's high-voltage circuit that powers the magnetron. Replacing a failed capacitor can help restore heating performance and reduce humming or breaker trips caused by HV faults. What it does:

• Works with the high-voltage transformer and diode to supply the voltage the magnetron needs for heating
• A weak or shorted capacitor may cause the microwave to run but not heat
• May lead to loud humming/buzzing, a blown internal fuse, or tripped circuit breaker
• Bulging, leaking, or burn marks on the capacitor indicate it should be replaced

• Includes 1 high-voltage capacitor

• Disconnect power by unplugging the unit or switching off the dedicated breaker before service
• High-voltage capacitors can retain a dangerous charge even when unplugged; discharge properly and follow safety procedures
• Document wire routing and terminal orientation before removal; transfer any brackets or clips from the original part
• After installation, ensure no voltage remains on the terminals before reassembly and testing

The Magnetron is an OEM part for Bosch microwaves. The magnetron generates microwaves used for cooking and heating food. It contains a magnet and vacuum tube that work together with a high-frequency electrical field to produce electromagnetic waves.

Symptoms of a bad magnetron include:

• Microwave not heating or heating unevenly/inconsistently
• Smell of burning within the microwave
• Tripping of electrical breakers when microwave is operated
• Buzzing or crackling noises emanating from inside the unit

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This door opening lever is the replacement release lever that lets the appliance door latch open and close smoothly, restoring reliable door-opening action and making everyday use easier. What it does:

• Replaces a worn, broken, or cracked lever that releases the door latch.
• Lets the door latch release properly so the door opens without excessive force or sticking.
• Works with the latch assembly to help ensure the door closes securely and operates smoothly.
• Addresses common symptoms such as a loose or unresponsive door handle, difficulty opening the door, or a lever that snaps.

• Disconnect power (and water, if applicable) before attempting any repair.
• Access may require removing the door trim or outer panel; basic hand tools are typically needed.
• Inspect surrounding latch components while replacing the lever and replace any damaged hardware.

This turntable ring supports the microwave's glass tray so it turns smoothly for even heating and prevents wobble. Durable rollers reduce friction and keep the tray centered for quiet, reliable operation. What it does:

• Supports and guides the glass turntable so it rotates evenly.
• Replaces worn or broken roller rings that cause the tray to wobble or bind.
• Reduces grinding or scraping noises from a misaligned turntable.
• Helps restore proper tray movement for consistent heating.

• Always unplug the appliance before servicing to avoid electric shock.
• Remove the glass tray, lift out the old ring, place the new ring on the turntable support, then replace the glass tray.
• Handle the glass tray carefully to avoid chipping or cracking; no special tools usually required.

This replacement cover protects internal components and restores the proper fit and finish of the original assembly. It secures nearby parts and helps prevent debris from entering sensitive areas. What it does:

• Covers and shields internal components from dirt and loose debris
• Secures the assembly and helps reduce vibration or rattling
• Replaces cracked, broken or missing covers that cause poor fit or unsecured parts
• Restores original appearance where the factory cover is damaged or lost

• Power off and unplug the appliance (or shut off circuit) before starting work
• Remove necessary access panels or screws to reach the cover; retain hardware for reassembly
• Align cover before fastening; do not force or over-tighten screws to avoid damage