Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Rubber inlet hose that connects your washer to the water supply. Replace if cracked, leaking, or worn. Standard 5-foot length with included washers.
Replaced flow meter and control valve Read more
Replace your cracked or missing timer knob cap to restore control panel appearance. Simple 5-minute DIY fix. Chrome finish includes locking pin design.
Watched the video and in 5 mins I was all done, very easy. Read more
Washer won't start or spin? A cracked plunger guide tube prevents the lid switch from engaging. This tube realigns the plunger for reliable operation.
I replaced the switch, the plunger, plunger guide and the lid cam, but the cam still didn't turn on the switch. Turned out someone had stood on the washer and bent the lid slightly, not enough to notice, but since I had ruled out just about everything else I started looking at the lid itself. I ended up bending it back close to it's original shape and now it works fine. I guess I learned a few things about washing machines though. One lesson is when you pull off the controls, the hose leading... Read more
Replace your washer's drain hose if cracked, kinked, or leaking. This 90-inch hose connects the washer tub to your home's drain system. Sold individually.
Model# MAV7257AWW Maytag Atlantis Washing Machine. Repairs were fairly easy along with the videos appliancepartspros offers on their website. Parts also came with instructions on how to install. Other videos were available on You Tube. The only part difficult to install was Thrust bearing kit - make sure when installing to pull down on shaft so washer and e-clip will fit. Another note, you can get a pulley for your replacement motor pulley on eBay and Maytag.com. Just pay close attention to... Read more
Replace a worn or broken rear self-leveling leg to restore stability. This foot supports the back of your washer and automatically adjusts to uneven floors.
I followed the Appliance Parts Pro's advice videos for the Maytag MAV6451AWW Atlantis washer on replacing the snubber ring and the suspension springs. Everything went just fine except replacing the two rear most suspension springs. None of the videos illustrated REINSTALLING the REAR springs which is extremely difficult because you can't get enough leverage with your arm extended. Observing my frustration, my wife recommended taking off the back side. You can't simply take off the back,... Read more
Fix a washer that won't advance cycles, stops mid-cycle, or hums but won't spin. This mechanical timer controls wash sequences. DIY-friendly repair.
Appliance Parts Pros I've used in the past and will continue to use, now they have a video showing step by step how to change the part your going to purchase, video also explains what the part does and symptoms of bad existing parts like mine. Washer machine was dripping water into tank when not in use, it was the water inlet valve. I purchased on a Sunday and it arrived with our mailman on Wednesday. I watched the repair video one more time and changed it out. When you unhook hoses to remove... Read more
Fix water leaking into the tub when your washer is off. This inlet valve controls water flow and stops leaks from failed solenoids. DIY-friendly repair.
Replaced the solenoid controlled water valve. Read more
White plastic hinge pin installs in the back corner of your washer lid. Replace if cracked, broken, or keeps dislodging causing the lid to malfunction.
Witha replacement part that took less than a minute to install Read more
Replacement screw secures panels, brackets, and internal assemblies. Needed when original hardware is stripped, corroded, or missing to keep parts tight.
Connects suspension spring to washer frame to support the tub. Replace if hook is broken, worn, or missing to restore proper tub suspension and alignment.
Inlet hose strainer and washer kit for washers. Replace if you notice leaks at hose connections or reduced water flow. Confirm fit with your model.
Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more
Small metal clip that secures panels, brackets, or tubing in place inside appliances. Replace if bent, fatigued, or missing to restore secure mounting.
Washer making noise or parts wobbling? A worn retaining ring may need replacement. Secures gears and pulleys on shafts. Moderate DIY difficulty.
I took the machine apart and installed a new brake rotor , Brake stator and a snubber ring, after the install the machine works great and no more squeaking. I will say one thing about AppliancePartsPros.com that when I first received the order the brake rotor was new in the sealed bag but the brake material wasn't attached to it, customer service was helpful and sent me a new part the next day. I will use this company again. Read more
Chrome control knob for washer control panels. Replaces broken, cracked, or missing selector knobs. Simple push-on installation. 1-inch diameter design.
Replaced knob Read more
Fix washer leaks and excessive vibration with this tub mounting bolt. Secures the inner tub to the bearing housing, preventing water seepage and noise.
Watched the video on how to replace. Ordered new roller, which was delivered in just a couple of days. Since the roller had broke, I was unable to roll out the refrigerator, so I tilted the refrigerator back and placed a small furniture slider under the roller frame to prevent gouging the wood floor. Then it was easy to slide out the refrigerator and replaced the roller as explained on the video. I had ordered a pin and bolt, just in case I would need to replace, but didn't need them. ... Read more
8-16 x 3/8 inch screw fastener for dryers. Secures baffles to drum and various internal components. Replace if missing, stripped, or damaged.