Maytag Mah3000aww Parts

Genuine Whirlpool part

Hose, Tub To Pump

By: Whirlpool

Part Number: WP22003262

Do-It-Yourself Stories from Customers like You Leaking from tub assembly and intermittent motor operation James F. • North Pole , AK • October 20, 2015

Basically rebuilt the washer from the ground up. Spent more money than a new washer but we have been so happy with the way this machine has worked over the last 19 years figured it would be money well spent. Read more

Genuine Whirlpool part

Hinge Screw, Single

5.0 (3)

By: Whirlpool

Part Number: WP22002012

This hinge screw fastens a hinge to the appliance cabinet or door, helping keep the door aligned and operating smoothly. Replace a missing or stripped screw to restore solid hinge support and reliable closure.

Secures the hinge to the cabinet/frame or door
Maintains proper alignment at the hinge point
Helps ensure smooth opening/closing and effective sealing where applicable
Common symptoms: loose or wobbly hinge, door sagging/misaligned, poor closure/seal, rattling, or a missing/stripped fastener

What's included: 1 hinge screw Install notes:

Disconnect power to the appliance; shut off gas if applicable
Support the door to relieve hinge load before removing or installing screws
Use the correct driver for your model to avoid stripping fasteners
Start threads by hand and tighten snugly; do not overtighten

Do-It-Yourself Stories from Customers like You Corroded Maytag dryer drum belt tension pulley Derek H. • Glendale , CA • November 09, 2018

Thankfully for the awesome tutorial videos, I was able to take apart the machine, diagnose the suspect screeching noise, order the new parts with the helpful link and fix it! Read more

Genuine Whirlpool part

Spring, Tub

By: Whirlpool

Part Number: WP22002099

Genuine Whirlpool part

Siphon Cup

5.0 (2)

By: Whirlpool

Part Number: WP22002265

Do-It-Yourself Stories from Customers like You Missing siphon cup and cap sipo George V. • San Jose , CA • July 25, 2015

Did not know if these were the right parts. I believe i talked to someone named Robin and she was very helpful and friendly. Said she wasn't sure these were the parts since they were not listed on my model number but said if they didn't work i could send them back. been to many parts stores and nobody could find these two items or even suggest them. Very good employee who helped me. Was really surprised how fast my order got here. Excellent service. I've bookmarked your site and will be doing... Read more

Genuine Whirlpool part

Door Boot Seal

4.9 (105)

By: Whirlpool

Part Number: 12002533

Front load washer door boot seal, comes with drain plug and clamp.

This part fixes the following symptoms

Marks left on clothes

Do-It-Yourself Stories from Customers like You Noisy bearings in a maytag neptune model mah7500awwi used the instructions Norman O. • Dayton , OH • November 04, 2016

I used the instructions from some of your previous customers. When I was ready to pull the inner tub from the outer tub, it pulled very hard. The front bearing had been HOT and really marked the shaft. The SEAL appeared to be almost plastic, not much left. I removed the seal from the Front bearing. This model had the original type seal with the plastic spacer behind the seal and in front of the front bearing.. BE SURE TO NOTE HOW THE PLASTIC SPACER CAME OUT--feet on spacer toward the... Read more

Genuine Whirlpool part

Clip, Front Panel

5.0 (1)

By: Whirlpool

Part Number: WP22002239

Do-It-Yourself Stories from Customers like You Leaking in multiple locations Michael I. • Brownsville , TN • April 13, 2016

Busted unit open, found leaks, ordered parts. Cleaned out the mess, put new parts in, works like a champ! Easy as it can get! Read more

Genuine Whirlpool part

Dispenser Bottom With 4 Clamps

5.0 (1)

By: Whirlpool

Part Number: 12001558

Do-It-Yourself Stories from Customers like You Noisy dryer and molding front seal on my front load washer Darin A. • Hillsboro , OR • August 08, 2016

Ordered the parts, watched the video and went to work on both. It was all very easy! Read more

Genuine Whirlpool part

Control Board

4.8 (4)

By: Whirlpool

Part Number: 12001725

This part is a genuine OEM control board made for use with washing machines. The control board is a critical component that monitors and controls the functions of the washing machine, including the spinning and draining cycles. This part is subject to deterioration over time, which will cause the control board to go bad and prevent the washing machine cycles from functioning properly. Unplug the washer and disconnect the water source before attempting any replacements. Wear work gloves to prevent injuries from occurring. This part is manufactured by Whirlpool and has been sourced directly from the manufacturer. It is sold individually. This control board is manufactured from high-quality, durable, non-corrosive materials. It is an authentic replacement part and thus is compatible with washing machines manufactured by Whirlpool, Amana, Jenn-Air, Admiral, Norge, and Maytag.

Do-It-Yourself Stories from Customers like You Would not high speed spin Daniel M. • Loomis , CA • December 08, 2014

Checked the circuit board to see if R11 was burnt and it was. They told me if the wax motor had a brown tip that I would have to replace the Machine control circuit board as well as the Wax motor. I ordered the new parts put them in and it worked. Read more

Genuine Whirlpool part

Drive Motor

4.8 (18)

By: Whirlpool

Part Number: 12002039

This is a Whirlpool washer drive motor and control board. The drive motor and motor control board are responsible for the spin cycles of the washer. A faulty motor may show signs of malfunction through a slower than average spin cycle. When the control board shorts out, the washer typically will not spin at all.Begin installation by removing the body of the washer. There are two screws at the base of the console. Remove these screws and flip the console back. Two clips are holding the body in place. Remove them with a flat-head screwdriver. Push these clips and pull the body off the washer. Now that the motor is exposed, remove the screws holding the motor in place with a nut driver. Two more clips fasten the motor. Push these clips with the flat head, and the motor is free to remove. Unplug the control board's wire harness from the washer. The new component is ready for install after these steps.The part is sourced directly from the manufacturer as a genuine OEM product. This kit is sold separately from the washer. This product is compatible with Whirlpool, Maytag, and Admiral appliances.

Do-It-Yourself Stories from Customers like You Maytag Neptune MAH4000AWW washer would not spin, or even agitate. Donald O. • Morgan Hill , CA • April 07, 2014

I had watched some videos on youtube to understand how to disassemble & gain access to the various washer components & their location. Very easy. I had first replaced the wax motor, but that was not the problem. I reviewed the diagnostic procedures that were present near the control board, followed the directions to remove the main plug from the motor control board, which should allow the washer to spin at 50 rpm. No spin, & upon closer inspection, I observed that one of the phase drive... Read more

Genuine Whirlpool part

Cord Grommet

By: Whirlpool

Part Number: 211881

Genuine Whirlpool part

Screw, Check Switch

By: Whirlpool

Part Number: 22001352

Genuine Whirlpool part

Button, Switch (Wht - End)

By: Whirlpool

Part Number: 22001788

Genuine Whirlpool part

Baffle, Drip (Rear)

By: Whirlpool

Part Number: 22001985

Genuine Whirlpool part

Baffle, Drip (Front)

5.0 (1)

By: Whirlpool

Part Number: 22001986

Do-It-Yourself Stories from Customers like You Front washer baffle had screws rusted off in it Monica B. • Oakes , ND • April 16, 2017

Ordered new baffle and the proper screws with help from appliance parts pros. Took washer apart. Removed soap dispenser cover, washer door, front, lifted top lid, removed seal to be able to access area to get screws in and tightened with a wrench. This part wasn't the easiest as there wasn't much room for my hand(s) to fit in, but just took my time and got it done. Read more