Maytag Mdb6650aww Dishwasher Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99001796
Color: Gray
Do-It-Yourself Stories from Customers like You
The guard filter had broken tabs for maytag dishwasher Catherine S. • Bethel , CT • January 16, 2016
I watched the video first, then I exchanged the new guard filter and lower washer arm parts and it was done. I am glad I watched the video to know that I had to retain the end shields. I probably would have discarded them if I had not watched the video. . Saved myself a service call fee. The parts arrived in 3 days which was nice. .
Read more
More
$14.46
- Compare At:
-
$16.12
- You Save:
-
$1.66
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002150
This seal sits at the dishwasher's air/water inlet, creating a tight barrier where the inlet assembly meets the tub or door. Replacing a worn seal helps stop nuisance leaks and supports proper fill and venting performance. What it does
- Forms a watertight seal at the air/water inlet connection
- Helps prevent drips or seepage during fill and wash
- Supports correct venting to keep moisture contained inside the tub
- Common failure signs include water on the floor near the unit, dampness around the inlet/vent area, or a cracked, flattened, or brittle seal
What's included
Install notes
- Disconnect power and shut off water before servicing
- Access method varies by model; remove the inlet/vent cover or side panel to reach the seal
- Clean mating surfaces; seat the new seal evenly without distortion
- Reassemble and run a brief fill/wash to check for leaks
Do-It-Yourself Stories from Customers like You
Dishwasher leaked every time it ran John S. • Morgan , NJ • January 16, 2018
Replaced the seal at the Air/Water inlet and also replaced the drain hose. Drain hose had a worn spot due to vibration rubbing on the floor
Read more
More
$9.77
- Compare At:
-
$11.63
- You Save:
-
$1.86
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY912545
This replacement rack track restores smooth, stable rack movement and keeps the oven rack aligned while sliding in and out. It helps prevent rack sagging, binding, or uneven travel so food and cookware stay level and secure. What it does
- Guides and supports the oven rack so it slides in and out smoothly.
- Prevents racks from sagging, tipping, or binding when pulled forward.
- Restores proper rack alignment to reduce scraping, catching, or loud banging.
- Works with standard oven/range racks that use a molded metal/plastic track system.
What's included One rack track. Install notes
- High-level swap: remove the oven racks, unfasten the old track, and secure the replacement in the same mounting locations.
- Use appropriate hand tools and avoid forcing parts; aligning the track before tightening fasteners reduces binding.
- Disconnect power to the appliance or follow the manufacturer's safety guidance if servicing components near electrical connections.
Do-It-Yourself Stories from Customers like You
Upper rack of dishwasher was not pulling out smoothly Douglas L. • Bellaire , TX • March 03, 2015
Ordered new frame, wheels and SS slide for the bad side. Job was done in 10 minutes and the rack now works smoothly.
Read more
More
$73.75
- Compare At:
-
$87.76
- You Save:
-
$14.01
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99001787
Color: Gray
Do-It-Yourself Stories from Customers like You
Bought a foreclosure and parts were missing from dishwasher Catherine R. • Alexander , AR • November 12, 2014
I was able to locate the model number and enter this on the website which gave me an expanded view of all the parts for my model. From this I was able to determine which parts I needed and order them. Customer Service was Excellent for Helping me make the right choices. The parts were cheapest here then any other website I found and they shipped to my home in less than 3 days! Now my dishwasher works like new!
Thank You AppliancePartsPro for all your help and getting me the parts I...
Read more
More
$11.95
- Compare At:
-
$13.27
- You Save:
-
$1.32
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP912680
This snap-in outlet connector secures wiring to an appliance control or harness and restores a reliable electrical contact. Designed for a direct, tool-assisted snap fit, it helps eliminate loose or intermittent connections. What it does:
- Provides a secure snap-in electrical connection between wiring and the appliance harness or control
- Restores power flow when a worn or damaged outlet causes intermittent operation or no power
- Prevents arcing and poor contact that can result from loose terminals
- Matches OEM fit for straightforward replacement when the original snap outlet is broken or missing
What's included: One outlet snap connector as shown Install notes:
- Disconnect power to the appliance before inspecting or replacing electrical parts
- Remove access panels as required to reach the outlet; replacement typically snaps into place
- Verify correct orientation and full seating of the connector to ensure a solid contact
- If corrosion or wiring damage is present, replace or repair wiring per OEM guidance
Do-It-Yourself Stories from Customers like You
Upper spray kept falling off when using dishwasher Robert P. • Cincinnati , OH • December 09, 2016
I was unable to remove the screwed snap outlet, therefore only replaced the upper spray arm and the wash arm retaining clip. This fixed the problem.
It would have been helpful if a tip were given as how to remove the screwed in outlet snap nut.
Read more
More
$46.69
- Compare At:
-
$55.56
- You Save:
-
$8.87
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 61002031
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 99001979
$41.25
- Compare At:
-
$48.67
- You Save:
-
$7.42
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 99002041
Do-It-Yourself Stories from Customers like You
Dish washer did a lousy job cleaning dishes due to a non rotating spinner at the bottom Gwendolyn S. • Hingham , MA • October 10, 2015
My son fixed it. Problem was one of the spinner pieces had worked itself loose and jammed the large arm from freely spinning.
Read more
More
$36.36
- Compare At:
-
$43.27
- You Save:
-
$6.91
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-918554
$31.42
- Compare At:
-
$37.08
- You Save:
-
$5.66
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 99002565
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002560
This water level switch senses the dishwasher's tub float and controls the water inlet. Replacing a worn switch restores correct filling, helping prevent overfilling or dry cycles that can reduce cleaning performance. What it does:
- Monitors the float position to open/close the fill circuit at the proper water level
- Common symptoms: dishwasher won't fill or stops filling too soon
- May also cause continuous filling/overfill if contacts are stuck closed
- Intermittent operation can leave the tub underfilled and washing performance poor
What's included:
- 1 water level (float) switch
Install notes:
- Disconnect power and shut off the water supply before servicing
- Remove the toe/kick panel to access the switch near the float assembly under the tub
- Note wire positions; transfer connectors one at a time and secure the switch in its bracket
- The float moves freely and actuates the switch before reassembly and testing
This part fixes the following symptoms
-
Will not drain
-
Won't start
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher wouldn't drain Ken S. • Columbus , OH • August 18, 2018
I called and talked to a customer service rep and she helped me troubleshoot the problem and order the correct part. She also sent me the pdf of the repair manual and I followed its instructions to replace the drain solenoid. It was a fairly easy repair. I wasn't sure if I would need the water level control switch, but I ordered it to be on the safe side. Turns out the original is still good.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002292
Dishwasher door latch includes the two switches. Handle not included. For the handle order WP99002836.
Do-It-Yourself Stories from Customers like You
Door handle on 2002 model maytag dishwasher broken Thomas H. • Fort Worth , TX • October 17, 2014
I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002218
Front bowl tine row
Do-It-Yourself Stories from Customers like You
Rusty worn out dishrack and parts Michael R. • Morris Plains , NJ • March 26, 2016
I ordered new replacement parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003317
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
Rinse agent reservoir was leaking unit wouldn't hold liquid… just ran out as you filled it Morgan L. • Cumming , GA • August 19, 2014
Ordered the part. Arrived the next day. Took the eleven screws off the door exposing the back of the Soap/Rinse Aid dispenser. Six screws hold it on the inside of the door. Popped off easily. There is a plug that runs from the timer to the dispenser…it's a pain to get off. Use a flat head screw driver. Screwed the new unit in place. Plugged it in. Put the door back together. I accidentally caught the door catch in the door and screwed it together seizing it...so I had to take the top screws off...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002183
This upper dishrack tub wheel attaches to the side of the inner dishwasher tub wall.
Do-It-Yourself Stories from Customers like You
Rusted lower dish rack and worn out tub wheels William P. • Des Plaines , IL • December 09, 2019
Also ordered a lower dish rack along with the tub wheels. Ordering is so easy and delivery was the next day. What a wonderful surprise! Loved the website videos as they helped tremendously with preparing to replace items. Will always use your company for our repair needs.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002140
Do-It-Yourself Stories from Customers like You
Dishwasher Mike M. • Mount Vernon , OH • November 27, 2015
Myself took old out put new in
Read more
More