Maytag Sav2555aww Parts

Genuine Whirlpool part

Main Bearing Assembly (Washer)

By: Whirlpool

Part Number: WP40004201P

This replacement main bearing assembly supports the washer's drive/spin system. It keeps the inner basket and drive shaft rotating smoothly and quietly, helping maintain alignment and reducing vibration during wash and high-speed spin.

Supports and centers the spin basket/drive shaft for low-friction rotation
Helps reduce noise and vibration when spinning at high RPMs
Restores smooth operation when the original bearing is worn or rough
Common symptoms: roaring/grinding during spin, basket wobble/play, roughness turning by hand, possible leak at rear center if related seal wear is present

What's included: 1 main bearing assembly Install notes:

Disconnect power and water before service; allow the appliance to cool
Access and replacement procedures vary by model; significant disassembly is typical
A bearing press/driver may be required; inspect shaft and related seals and replace if worn
After reassembly, run a test spin to check for leaks

Do-It-Yourself Stories from Customers like You Noisy washer due to bad main bearing assembly caused by water leak of the tub Sotirios P. • Placentia , CA • October 16, 2014

I decided to repair my Amana LWA50AW top loader washer because it has served us well, it is made by Speed Queen and an equal replacement is expensive. These are very dependable washers. The parts I ordered were: part #R9900552 (hub and seal kit) This kit does not include the Tub or Main bearing!!! Nor the drive belt!!! The main bearing is what is attacked by the water due to leaks and makes a jet engine sound as the tub spins faster and faster. Any way, the kit should be updated to include... Read more

$58.95

Compare At:: $70.74
You Save:: $11.79

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Drain Hose (Washer)

4.9 (16)

By: Whirlpool

Part Number: WP40053901

This washer drain hose channels used water from the pump to your home drain. A sound, properly routed hose helps prevent leaks and backups during the drain cycle for reliable performance and a cleaner laundry area.

Routes wastewater from the drain pump to the standpipe or laundry tub
Replaces hoses that are cracked, brittle, split, kinked, or leaking
Common fix for leaks at the back of the washer or slow/failed draining
Restores a secure, watertight path when correctly clamped and routed

What's included: 1 drain hose Install notes:

Disconnect power and turn off water; expect some residual water—use towels or a pan
Wear gloves; edges and clamps can be sharp
Transfer and reuse existing clamps/brackets if your model uses them; ensure snug connections at both ends
Route to the manufacturer-recommended height and secure to the standpipe; avoid kinks and test drain

Do-It-Yourself Stories from Customers like You Leaking washer Adam E. • Sacramento , CA • April 14, 2015

The drain hose had rubbed against a metal piece until a split was formed. There was only one clamp to remove to get the old hose off. The repair took about an hour to complete. Amana distinctions washing machine. Read more

$50.22

Compare At:: $59.76
You Save:: $9.54

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Adjustable Leg

5.0 (5)

By: Whirlpool

Part Number: 22003428

Leg, adjustable (w/nut)

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

$14.95

Compare At:: $17.94
You Save:: $2.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Fabric Dispenser

5.0 (6)

By: Whirlpool

Part Number: WP21001905

One piece. Works on most Maytag washers. Color: white. It measures about 5 inches in diameter, and 5-1/2 inches high.

Do-It-Yourself Stories from Customers like You The upper agitator kept floating off Brian T. • Pine Grove Mills , PA • October 02, 2018

New parts did the trick. Very easy to replace. Did not need to replace the base agitator, the fabric dispenser, or the screw; but, while it was apart it was simple to do. Read more

$57.42

Compare At:: $68.33
You Save:: $10.91

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Retaining Clip

5.0 (3)

By: Whirlpool

Part Number: WPY013783

This small retaining clip secures components in place inside the appliance, helping prevent movement, vibration, and premature wear. Replace a bent, fatigued, or missing clip to restore a solid, factory-tight hold.

Holds panels, brackets, or tubing securely in their mounts
Helps maintain alignment to reduce rattles, rubbing, or intermittent issues
Common signs of failure: missing clip, loose fit, buzzing/vibration, parts that won't stay seated
Restores proper retention after service, transport, or vibration-related fatigue

What's included: 1 clip Install notes:

Disconnect power and shut off gas/water before servicing
Note the original clip's orientation; remove with needle-nose pliers
Seat the new clip fully—do not over-bend; spring tension provides the hold
Test operation before reassembly

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Pretty much everything Charlotteanne Y. • Kingston , IL • August 06, 2018

Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more

$6.45

Compare At:: $7.68
You Save:: $1.23

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Hose, Pressure Switch (Tub-To-Switch)

5.0 (2)

By: Whirlpool

Part Number: WP21001748

This pressure switch hose carries air from the washer tub to the pressure switch so the machine can sense and control water level. Replacing a damaged hose restores proper fill control and prevents level-sensing errors. What it does:

Channels air/vacuum from the tub to the pressure switch so the control can detect water level.
A cracked, pinched, or collapsed hose may cause overfilling, underfilling, failure to advance cycles, or continuous fill.
Restores accurate water-level sensing when replacing a worn or damaged hose.

What's included: One pressure switch hose. Install notes:

Disconnect power to the appliance before servicing to avoid shock or injury.
Remove and replace the hose carefully; avoid kinks, sharp bends, or pinched routing that can impair sensing.
Use the factory-style connection points and clamps; ensure both ends are seated securely.
After installation, run a test fill or diagnostic cycle to confirm correct water-level operation and no leaks.

This part fixes the following symptoms

Will not stop filling with water

Do-It-Yourself Stories from Customers like You Water was overflowing and would not stop Alan L. • Rochester , WA • September 09, 2017

Unplugged washer and called for a water truck to pump out basement, 2 feet of water. Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Selector Knob

4.9 (8)

By: Whirlpool

Part Number: WP27001126

This cycle selector knob is used on some Maytag washers and dryers. This is not the timer knob. Color: stainless steel. Measures about 2 inches in diameter where the handle extends.

Do-It-Yourself Stories from Customers like You Selector knob broke on washing machine Shirley W. • Huntley , IL • April 30, 2018

Opened the package containing the new knob, took off the broken knob, put on the new knob. Presto, works lke a charm. Read more

$50.22

Compare At:: $59.26
You Save:: $9.04

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Bearing

4.8 (4)

By: Whirlpool

Part Number: WP40004001

Can be upper or lower bearing depending on application.

Do-It-Yourself Stories from Customers like You Made a lot of noise on spin cycle Recaredo M. • Stafford , VA • February 08, 2019

Dismantle the unit and replaced tub bearing. Press the old bearing out then press new bearing in. Read more

$60.69

Compare At:: $72.22
You Save:: $11.53

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

5.0 (4)

By: Whirlpool

Part Number: WP33002917

Specs: No.8X1/2 HEX WASHER HEAD

Do-It-Yourself Stories from Customers like You Control board shorted out during drying cycle with a series of loud popping noises creating a blackened corner of the dishwasher door a pungent electircal fire smell and tripped circuit breaker Charles L. • Concord , MA • November 01, 2014

Replaced the control board after removing the inner door liner, plastice board cover and board itself, by removing screws, working various plastic clips/tabs and unclipping wire harnesses from board. most of time was spent cleaning the black soot from the door, which had a terrible burnt electrical/plastic fire smell. Cleaned mold/scale off of as much of the door as I could while in there as well. Removing parts without breaking plastic tabs to hold the new parts was trickiest part. Read more

$7.95

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (12-14 X 1/2)

5.0 (2)

By: Whirlpool

Part Number: WP27001200

This 12-14 x 1/2 screw is a factory fastener used to secure appliance panels, brackets, and components. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and keeps parts properly aligned for reliable operation.

Secures panels, brackets, and internal components to their mounting points
Replaces damaged, rusted, or missing hardware
Helps stop vibration and rattling caused by loose fasteners
Restores proper alignment and stability of covers or assemblies

What's included: One screw Install notes:

Disconnect power and, if applicable, shut off gas/water before servicing
Match the original screw's location and length; replace one at a time
Start threads by hand to prevent cross-threading; tighten snugly without over-torquing
Reinstall any original washers, clips, or spacers used with the screw

Do-It-Yourself Stories from Customers like You My pump belt broke Steven H. • Harleysville , PA • June 15, 2015

This was a very easy fix. Two screws to get the front off of the washer. Removed one side of the tensioner spring. Loosened two screws for the motor and two screws for the pump. I decided to replace the agitate belt even though it wasn't broken.. So, I removed that belt from the pulleys and the removed the broken belt. then just reversed the process to install the belts. it toke me less than 30 minutes and my washer was back in service. Read more

$7.95

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Standpipe Adapter (Drain Hose Connector)

5.0 (2)

By: Whirlpool

Part Number: 40008101

This standpipe adapter connects the appliance drain hose to the household standpipe or waste outlet, helping ensure a secure drain path and reduce the risk of leaks or poor drainage. Simple replacement for damaged or worn connectors. What it does:

Provides a sealed connection between the appliance drain hose and the standpipe or drain outlet
Prevents water leaks at the hose-to-standpipe junction
Helps maintain proper drainage and reduces gurgling or slow-draining symptoms
Durable plastic construction designed to resist cracking and wear under normal use

What's included:

One standpipe adapter

Install notes:

Turn off and unplug the appliance and stop water flow before replacing the adapter
Remove the old adapter and clean the mating surfaces; ensure the hose and standpipe are free of debris
Slide the drain hose onto the adapter fully and secure with the proper clamp or retainer
If you find cracks in nearby hoses or fittings, replace those parts as needed and test for leaks after installation

Do-It-Yourself Stories from Customers like You The washing machine was leaking at the point where the empty hose went down into the wall Debara K. • Garrison , IA • August 17, 2016

My husband figured out that we needed the plug that goes around the hose entry point. It was an easy fix for him and no leaks. The part came quickly which was great since we have a lot of laundry. Read more

$47.95

Compare At:: $56.58
You Save:: $8.63

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Hose, Tub To Pump (Drain Hose)

4.0 (1)

By: Whirlpool

Part Number: WP40094201

This tub-to-pump drain hose carries wash water from the washer tub to the drain pump so the machine can pump out during drain cycles. It replaces a cracked, split, or clogged hose to stop leaks and restore proper draining. What it does

Directs tub water to the drain pump during drain and spin cycles
Seals at tub and pump connections with hose clamps to prevent leaks
Restores normal draining when original hose is damaged, cracked, or collapsed
Helps prevent water on the floor and washer failure-to-drain symptoms

What's included One tub-to-pump drain hose Install notes

Disconnect power and turn off water supply before starting any repair
Remove lower access panel or cabinet to access hose and clamps
Inspect and reuse or replace clamps as needed; secure hose ends evenly to avoid leaks
Route hose without sharp bends or kinks; check for leaks after reconnecting power and running a short cycle

Do-It-Yourself Stories from Customers like You Leaking washing machine. Richard H. • Quilcene , WA • July 11, 2023

Replaced hoses and hose clamps. Read more

$20.27

Compare At:: $24.32
You Save:: $4.05

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Nut-Lock (Locking Nut), 1 Count

5.0 (1)

By: Whirlpool

Part Number: WP210385

A replacement nut-lock used to secure fasteners and keep panels or components from backing off due to vibration. Simple, durable hardware that restores a secure connection and reduces rattling or loose parts. What it does:

Secures a mating bolt or stud to prevent loosening from vibration or movement
Restores a solid attachment for panels, brackets, or assemblies that may come loose
Helps eliminate symptoms such as rattling, vibrating, or intermittent panel movement
Suitable where a locking fastener is required to maintain a reliable connection

What's included: One nut-lock. Install notes:

Disconnect power and follow appliance safety procedures before starting work
Locate the matching stud or bolt and remove the old fastener if present
Use the correct-size wrench or socket and tighten until the nut-lock seats; avoid over-tightening
Inspect threads and mating hardware for damage; replace damaged components

Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

$5.95

Compare At:: $7.14
You Save:: $1.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Nut (1/4-20)

5.0 (1)

By: Whirlpool

Part Number: WPW10139757

This 1/4-20 nut secures related fasteners in appliance assemblies to keep components aligned and stable. It's a direct-fit replacement when the original nut is worn, stripped, or missing. What it does:

Threads onto a 1/4-20 bolt or stud to lock parts together
Restores tight mechanical connections that reduce vibration and noise
Helps maintain proper alignment of panels, brackets, or linkage
Commonly replaced when the original nut is rounded, corroded, or loose

What's included:

One 1/4-20 nut

Install notes:

Use the correct 1/4-20 bolt or stud size and thread engagement
Tighten to manufacturer torque if specified; avoid over-tightening
Inspect adjoining parts (bolt, washer, bracket) for wear before reassembly
Turn off and unplug the appliance before performing repairs

Do-It-Yourself Stories from Customers like You Dryer making loud noise like the belt was starting to come apart Douglas M. • Lowell , MA • January 10, 2015

After watching the repair video I opened up the dryer without any problems and found that the belt tension pully bearing failed and the mount arm had an excessive amount play in it. So armed with the part numbers I found here I went down to the local parts store and found that they did not stock the parts but could get them in a week. I went home and ordered them on line and had them the next day. I did vary from the video a bit. I uncliped the motor wire connector and removed the two screws... Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Grease, Silicone - 2 Oz

5.0 (1)

By: Whirlpool

Part Number: WP26594P

Do-It-Yourself Stories from Customers like You Loud noise like jet engine during fast spin Ping J. • Southborough , MA • June 15, 2021

I suspected the main bearing had worn out, and I was right. It is a difficult job, because I am retired, I had the time. During disassembly, I found the hub had rusted really bad, it needed replacement. I did not buy special tools. The manufacturer repair manual says to use three OEM tools, I made some tools with wood. Simon's video is a big help. Now the washer is quiet, time will tell how good a job I did. This is the first time I opened up a washer, the second time would be much easier. Read more

$45.95

Compare At:: $54.22
You Save:: $8.27

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

By: Whirlpool

Part Number: WP3400527

$4.95

Compare At:: $5.89
You Save:: $0.94

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Maytag Sav2555aww Parts

Main Bearing Assembly (Washer)

Drain Hose (Washer)

Adjustable Leg

Fabric Dispenser

Retaining Clip

Hose, Pressure Switch (Tub-To-Switch)

Selector Knob

Bearing

Screw

Screw (12-14 X 1/2)

Standpipe Adapter (Drain Hose Connector)

Hose, Tub To Pump (Drain Hose)

Nut-Lock (Locking Nut), 1 Count

Nut (1/4-20)

Grease, Silicone - 2 Oz

Screw