Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Mgr 5745 Adw Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Sealed Gas Burner Head
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3412D024-09

The Sealed Gas Burner Head is an OEM part for Whirlpool gas ranges. It directs the gas flow to the burner, ensuring an even flame for cooking. This component is crucial for efficient heat distribution and precise cooking control.

Causes of a bad sealed gas burner head can include clogging from food debris or grease, corrosion due to exposure to moisture, or physical damage from impact or excessive heat. Over time, these factors can affect the burner's performance, leading to uneven cooking or failure to ignite.

Symptoms of a bad sealed gas burner head include:

  • Uneven flame or no flame at all
  • Difficulty in igniting the burner
  • Yellow or irregularly shaped flames
  • Burner not heating evenly or adequately

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Gas smell
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Flame was appearing around the edge of the sealed burner   James Y. • Muncy , PA • November 11, 2014

I replaced the burner head. I turned off power to the stove, although I did not turn off the gas. I gave the old burner head a slight twist counter-clockwise until it lifted off the stove. I used the pliers to pull the wires from the old burner, then placed them onto the contacts on the new burner. Set it in place, and gave it a clockwise twist until it was snug. This stove originally came with gaskets beneath the burners, but the info for the replacement part stated that a gasket was not... Read more

More
$63.48
Compare At:
$74.91
You Save:
$11.43

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Door Handle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3405184

The Door Handle is an OEM component for Whirlpool dryers. It provides convenient access to load and unload clothes through the dryer door opening. 

Causes of a bad door handle can include normal wear and tear over extended use. Repeated clutching and releasing of the handle leads to fatigue of rubberized grip areas and loosening of mechanical connections. Accidental falls or impacts when transporting dry loads of clothes could also damage the handle structure or mounting.

Symptoms of a bad dryer door handle include:

  • Increased play, wobble, or looseness when grasped  
  • Detachment or separation from the door assembly
  • Cracks, splitting, or broken areas compromising the grip surface
  • Inability to smoothly open or close the dryer door

Compatible models also include Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore dryers.

Do-It-Yourself Stories from Customers like You Missing oven and broiler handle   Travis W. • Zwolle , LA • October 15, 2014

Separated oven door by removing screws. Inserted handle and secured with clips, and reassembledo door with screws provided. In served broiler handle and snappedal into place. Read more

More
$51.28
Compare At:
$61.54
You Save:
$10.26

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Oven Door Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7212P043-60

The Oven Door Seal is an OEM part for Whirlpool ovens. This seal is crucial for maintaining the oven’s efficiency by creating an airtight seal around the door, preventing heat from escaping during cooking. It helps ensure that the oven maintains the correct temperature, which is essential for even cooking and energy efficiency.

Common causes of a bad oven door seal include wear and tear from regular use, exposure to high temperatures, and damage from cleaning or handling.

Symptoms of a bad oven door seal include:

  • Heat escaping from around the oven door
  • Longer cooking times or uneven cooking
  • The oven door not closing properly
  • Visible cracks, tears, or deformation in the seal

This OEM part is also compatible with some Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You Missing screws and bad sealing door gasket   Thomas P. • Palmdale , CA • December 15, 2015

Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises. Read more

More
$50.24
Compare At:
$60.29
You Save:
$10.05

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74006515

The Oven Door Panel Screw is an OEM replacement part for Whirlpool ovens and ranges. It is a component used to fasten the outer panel to the interior metal door frame.

Causes of a bad oven door panel screw can include normal wear from repeated opening and closing of the door, damage such as stripped threads from overtightening, or corrosion over time inhibiting its fastening function.

Symptoms of a bad oven door panel screw include:

  • The outer panel becoming loose, wobbly, or detached
  • Gaps appearing around the door seam
  • Scratches or other damage to the door panel
  • Reduced insulation quality of the door assembly

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You Door handle of upper oven broke off   Jodi G. • Oak Park , MI • December 01, 2014

Start by removing the frame on the sides and bottom of the door. (Do not unscrew the corner screw holding the side frame and bottom together.) Be careful the glass will fall once the last screw is removed from the bottom so hold tight. Carefully remove glass and set aside. Remove top frame that held the handle. Once all the frame work and outer glass is removed unscrew the bracket that held the door handle from the door. Taking the top frame and bracket insert screw and washer and screw the... Read more

More
$7.95
Compare At:
$9.38
You Save:
$1.43

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working   Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

More
$7.95
Compare At:
$9.46
You Save:
$1.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Oven Door Handle
Genuine Whirlpool part
By: Whirlpool
Part Number: 74011777

The Oven Door Handle is an OEM part for Whirlpool ovens. It is used to open and close the oven door safely and conveniently. This handle provides a sturdy grip, allowing users to access the oven interior without direct contact with hot surfaces.

Causes of a bad oven door handle can include wear and tear from regular use, exposure to high temperatures, or damage due to impact or mishandling. Over time, screws or mounting brackets may become loose or corroded, affecting the handle's stability.

Symptoms of a bad oven door handle include:

  • The handle feels loose or wobbly
  • The handle has visible cracks or breaks
  • Difficulty in opening or closing the oven door
  • The handle becomes detached from the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Also order 2 screws, part number WP74006515.

Do-It-Yourself Stories from Customers like You Door handle broke off   Jeri F. • Sedona , AZ • November 15, 2015

Ordered new handle from Appliance Parts Pro and replaced with the new handle. Read more

More
$126.95
Compare At:
$151.07
You Save:
$24.12

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Leveling Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10058460

The Leveling Leg is an OEM part for Whirlpool ranges. It's designed to ensure your range is perfectly balanced and stable on uneven floors. By adjusting the height of the leveling legs, you can prevent wobbling and ensure that your cooking surface is perfectly horizontal, which is critical for even cooking and baking.

Causes of a malfunctioning Leveling Leg can stem from physical impact damage, corrosion in humid conditions affecting integrity and adjustability, and wear over time, particularly if frequently adjusted or cleaned aggressively.

Symptoms of a bad Leveling Leg include:

  • The range tilts or wobbles, making cooking uneven.
  • Difficulty sliding pots and pans across the cooking surface due to the appliance not being level.
  • Increased strain on other components of the range, which could lead to premature wear or failure.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Anti tilt bracket for stovetop oven   Richard O. • Levittown , PA • October 11, 2019

Installed it according to video watched. Read more

More
$9.95
Compare At:
$11.84
You Save:
$1.89

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Oven Door Handle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011675

Color: White

Do-It-Yourself Stories from Customers like You Broken oven handle   Bill M. • Fort Myers , FL • November 22, 2014

Removed oven door by simply lifting it off of the hinges. New models of most stoves have two screws easily accessible from inside the oven door, but this older stove required the entire inner part of the oven door to be disassembled and the interior glass removed before the two screws that attach the handle can be accessed. Make sure to note how the door comes apart because it can be quite puzzling to put the door back together, especially for someone inexperienced with this repair, Read more

More
$102.29
Compare At:
$122.75
You Save:
$20.46

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Towel Bar (30-Inch Door Handle)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98004942

This 30-inch towel-bar style door handle spans the appliance door and provides a solid, comfortable grip. Replace a bent, cracked, or missing handle to restore safe door operation and a clean, like-new front appearance. What it does:

  • Serves as the long, bar-style grip used to open and close the door
  • Direct replacement for a handle that is loose, cracked, dented, or missing
  • Helps restore safe, comfortable door operation and front-panel appearance
What's included:
  • 1 door handle (towel bar, 30-inch)
Install notes:
  • Disconnect power and allow the appliance to cool completely before starting
  • Protect glass and trim; support the door during service
  • On most models, remove the inner door panel to access the handle fasteners
  • Reuse existing mounting hardware and any end caps/spacers if equipped; tighten evenly and test door operation

Do-It-Yourself Stories from Customers like You Broken oven door handle   Kari M. • Greensburg , IN • December 10, 2021

The plastic piece on the handle where the screw goes in to hold glass door up had broke. I ordered new handle, the retainer pieces that go over the plastic pieces to lock it all in and screws that were suggested. The screws were the wrong ones. They were way too small. I already had one screw and thankfully only had to buy 1 new one because the screw was $40 and shipping’s $10 for it AND it’s on back order right now. The old retainer ring that goes over plastic piece was a nightmare to remove... Read more

More
$82.95
Compare At:
$98.71
You Save:
$15.76

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Leveling Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: W11665456

The Leveling Leg is an OEM replacement part for Whirlpool ranges. These adjustable legs help balance and stabilize the range.

Causes of a bad leveling leg commonly involve wear over time, thread or weld failures from supporting heavy loads, as well as damage due to impact or drops during installation.

Symptoms of a faulty leveling leg include:

  • Instability such as rocking motions felt while cooking
  • Uneven heating
  • Doors that do not close properly

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You 2 leveling legs on a range had been damaged by tilting the appliance the plastic threads were broken   William R. • Cary , NC • June 28, 2014

The problem was partly caused because the original legs were at full extension. The replacement legs were longer than the originals and were more secure at the needed length. One difficulty was that the threaded base plate where the legs screwed in had been damaged and had to be reshaped, I was able to reshape the sockets with some effort, to allow the legs to thread in, though one remained slightly angled. (A metal tool of some type which could be threaded in and used to bend the socket area... Read more

More
$21.95
Compare At:
$26.12
You Save:
$4.17

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Module-Spk
Genuine Whirlpool part
By: Whirlpool
Part Number: W11590249

The Spark Module is an OEM replacement part for Whirlpool ranges. This module generates and distributes the electrical current needed to ignite the range burners. Dependable sparking is essential for safe and efficient burner ignition.

Causes of a bad spark module can include cracked circuit boards, worn-out electrodes, or malfunctions in the module's timing mechanism.

Symptoms of a bad spark module include:

  • Burners failing to light or taking excessive time to ignite
  • Constant tripping of the oven or range thermal fuse
  • Visible flames or smells coming from under the burners
  • Inability to start or maintain oven/range heating functions

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

More
$16.75
Compare At:
$19.77
You Save:
$3.02

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10278150

The Clip is an OEM part for Whirlpool ranges. This part holds the surface igniter in place, ensuring that it remains properly positioned to ignite the gas burner efficiently.  

Causes of a bad surface igniter clip can include wear and tear from regular use, damage from high heat exposure, or breakage due to improper handling during maintenance. 

Symptoms of a bad surface igniter clip include:

  • The igniter not staying in place
  • Difficulty in lighting the burner
  • The burner not igniting at all
  • Visible damage or deformation of the clip

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ignitor clip rusted away.   David K. • San Diego , CA • December 08, 2018

Replaced ignitor clip. Read more

More
$36.63
Compare At:
$43.59
You Save:
$6.96

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Oven Door Hinge
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011141

The Oven Door Hinge is an OEM part for Whirlpool ranges. It is essential for the smooth operation and stability of the oven door, allowing it to open and close properly. This hinge supports the weight of the door and ensures it stays securely in place during use.

Causes of a bad oven door hinge can include wear and tear from frequent use, rust or corrosion, and damage from accidental force or misalignment. 

Symptoms of a bad oven door hinge include:

  • The oven door not closing completely or evenly
  • Difficulty in opening or closing the door
  • The door feels loose or makes unusual noises when moved

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • Door won't open or close
See more...
Do-It-Yourself Stories from Customers like You Door hinge on Maytag Stove was loose   Larry S. • Champaign , IL • March 20, 2014

I replaced the hinge due to the hinge spring breaking. To replace the hinge you do the following: 1. Disconnect power to stove, either at circuit box or at outlet. 2. Lift door off of outside hinge arms ; no screws are used to attach the door to the hinge 3. Remove two screw on under side of cook top, one on each side. 4. Disconnect cook top connector. 5. Lift cook top off 6. Remove screws from top rail of stove that hold the side panel. 7. Remove the screw on the back that hold the side... Read more

More
$95.95
Compare At:
$114.18
You Save:
$18.23

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Sealed Burner Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3412D024-26

This is a replacement sealed burner cap. This is a genuine OEM part made by Whirlpool and has been sourced directly from the manufacturer. This part is intended to replace a broken, misplaced, or defective burner cap in various models of gas ranges and stoves. Electrodes are included.This sealed burner cap protects the surface burner and allows the cooktop to light properly. If the gas igniter is glowing but does not ignite, the stove won't start up, or there will be a gas smell. Proper tools may be required to replace this part. Always ensure the appropriate safety precautions are adhered to when attempting to fix any appliances. Make sure that the stove is entirely disconnected from gas and power before starting the repair work. For more accurate information on how and where to install this sealed burner cap, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this burner cap is suitable for use on several different models of gas stoves, ranges, and cooktops manufactured by Whirlpool, Maytag, KitchenAid, Amana, and other Whirlpool brands. This is a genuine part made of high-quality, durable materials and is sold individually.

Do-It-Yourself Stories from Customers like You Burner rusted out inside   Timothy K. • Bayville , NJ • September 06, 2014

These are very easy to replace ,just gave the old one a quarter turn lifted it out took the two wires off (noted where each one will go on the new burner ) pop the wires onto the new burner put it on and good to go. Read more

More
$55.66
Compare At:
$65.68
You Save:
$10.02

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Surface Burner Ignitor
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10209656

The Surface Burner Ignitor is an OEM part for Whirlpool gas ranges. This part ignites the gas to create a flame on the burner, allowing for efficient cooking.

Causes of a bad ignitor can include wear and tear from regular use, electrical issues, or physical damage to the ignitor element.

Symptoms of a bad surface burner ignitor include:

  • The burner not lighting or taking longer to light
  • Clicking sounds without ignition
  • Weak or inconsistent flame
  • The smell of gas without ignition

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You The spark ignitor for two units were not functioning properly or at all   Darrell L. • Hamilton , IL • August 18, 2015

First I watched the repair video, and then was successful in changing out two of the Ignitor's on the surface Burners, it worked great ! Read more

More
$53.95
Compare At:
$63.66
You Save:
$9.71

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY706189

The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain a firm hold, contributing to the overall functionality and safety of the appliance.

Over time, screws can become worn or stripped due to regular use, corrosion, or over-tightening. 

Causes of a bad screw include wear and tear, exposure to moisture leading to rust, and over-tightening which can strip the threads.

Symptoms of a bad screw include:

  • Loose or wobbly components
  • Misalignment of parts
  • Noise due to vibrating or loose parts
  • Difficulty in securing or removing the screw

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Drum baffle broke off   James H. • Etna , OH • March 21, 2017

I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more

More
$7.95
Compare At:
$9.46
You Save:
$1.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store