Pp5fnyass Parts

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

The carburetor is the part of the chainsaw that mixes air from the intake valve system and gas before the fuel mixture goes to the engine. This ensures that the chainsaw is capable of continuing to run while it is in use. A bad carburetor will cause problems with how the chainsaw runs, and it may stop running during work. If the engine does not start when the tank is full of fresh fuel, test the carburetor. Start by removing the air filter and pouring a teaspoon of fuel onto the carburetor. Then, pull the starter rope to start the engine. If the engine starts but quickly dies, it means that the carburetor will likely need to be replaced. The replacement of the new carburetor is fairly simple. Remove the rear cover on the chainsaw to remove the old carburetor. Once you have removed the old carburetor, you can then install the new carburetor. Replace the cover and test the chainsaw. This is an OEM sourced part that will work with several models of chainsaws from Poulan and Craftsman.

This is a replacement chainsaw fan housing that can work with several models of chainsaws. The fan housing attaches to the handle starter and protects the fan, while still allowing for airflow. If the housing is damaged, owners will want to replace it. Not having a cover for the fan could be dangerous, and it could increase the risk of further damage to the chainsaw.This yellow fan housing is made from durable plastic. If the plastic cracks or elements of the housing have started to break off, it should be replaced. The replacement procedure is relatively easy for the housing. Owners will want to be sure the chainsaw is cool and may want to remove the chain for safety before making the replacement.The chainsaw fan housing will work with a range of models from Husqvarna and Poulan. The high-quality part is a genuine OEM replacement sourced from the manufacturer. It is sold individually.

This baffle is a genuine Husqvarna part. Baffles are used to control or restrict the flow of fluids, gases, and other materials, so it is an important part. The size of the holes on the baffle and the baffle itself can be controlled, modified, or manipulated in different ways to affect the power of the chain saw. Because it is connected to the muffler, doing so may affect the noise level of the chain saw.It is a genuine OEM part sourced from the manufacturer. This Husqvarna baffle is black, spherical in shape, and looks like a large screw. This part contains all necessary sections of the baffle. It can be used to replace the baffle on a functioning chain saw with which it is compatible.This Baffle is compatible with Poulan chainsaws, specifically the PP4818A chain saw and PP5020AV chainsaw. It may also fit other chain saws that are compatible with Husqvarna parts, such as Weed Eater, Craftsman, RedMax, and AYP.

This pleated filter or filter pleat is an OEM replacement part designed specifically for use in chain saws and gas chain saws made by Craftsman, Husqvarna, and Poulan, among others. The filter is designed to capture any debris or dirt from the air before it makes its way into the carburetor and engine. Any debris can cause the engine to malfunction or idle unevenly. This can also prevent proper cooling and allow engine overheating or damage. Replacing the filter is easy and requires a screwdriver and socket set. After the machine cools completely, remove the cover. Next the filter pleat is removed and replaced with this replacement part. Then, replace the cover. This part ships individually without any hardware or other components and is made of long-lasting, effective materials.

This is a high-quality assembly seal and bearing that is used on chainsaws by several manufacturers. The purpose of the ball bearing is to reduce friction between various moving parts in a chainsaw or another tool. The component is also used to stabilize and hold the position and angle of specific parts in lawn and garden equipment. The assembly seal and bearing experience substantial wear and may need to be replaced regularly. When replacing the assembly seal and bearing in a chainsaw, basic tools will be needed. A screwdriver, a pair of pliers, a socket set, and an impact wrench may be required for the process. First, take the chainsaw and place it on a stable and level surface. Make sure it is powered off before disconnecting the spark plug wire. The engine will need to be removed to replace the bearing and its seal. Test the tool before further use.This assembly seal and bearing are designed for use with Husqvarna, Craftsman, and Poulan chainsaws. The part is sold on an individual basis with one seal and one bearing. It is a genuine OEM replacement component that is directly sourced from the manufacturer.

This bar adjustment kit is a replacement bar adjustment for a chainsaw. This kit contains the adjustment bolt, retainer ring, and a pin. It sits on the inside of the clutch cover and is positioned to put tension on the chain. Keeping the right amount of tension in the chain is crucial for users’ safety. If the chain becomes too loose, it can kick back or come off during operation. Through normal repeated use, the chain will become looser on the guide bar over time. Replacing the bar adjustment kit will restore the tension in your chainsaw to the appropriate amount. Be careful not to overtighten the chain, though, as it can cause unwanted friction and become a fire hazard. This is a genuine OEM part comes straight from the manufacturer and can be easily installed on Crossman or Poulan products with nothing more than a screwdriver. Simply remove the clutch cover, remove the old bar adjustment kit, replace it with the new one, and then align the corresponding parts when reattaching the cover. This part ships individually.

This part is a piston kit that is used on chainsaws. A piston is a moving component inside of the cylinder on a gas-powered chainsaw that moves forward and back at up to 14,000 RPM. The piston can idle at a much lower RPM which allows the chainsaw to remain on without the chain being engaged.A new piston kit may be needed if the engine is unable to achieve sufficient RPM to engage the clutch and turn the chain around the bar. The replacement process is not an easy one, so it is recommended that a trained repairman replace this part. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This piston kit is a genuine Husqvarna part. It is sold individually. This specific piston kit is compatible with chainsaws that are manufactured by Husqvarna, Craftsman, and Poulan.

Chainsaws may create a great deal of heat and friction, but the oil pump system prevents trouble. When using a chainsaw, it is necessary to use a specialty chainsaw bar oil. This is poured into a reservoir, and as the throttle is engaged, it cues a pump to distribute oil out of a port and on to the bar. From there the oil is distributed across the chain, which eliminates or greatly reduces friction and heat. The use of the oil pump is crucial, and this oil pump kit is a full replacement for times when a chainsaw is not getting adequate oil on the bar. This OEM replacement part includes the pump, housing, lines, and hardware necessary for installation. It works with a long list of brands, including Poulan. Craftsman, Husqvarna, and others. This project will require wrench and screwdriver sets to perform the repair. It ships as an individual kit ready for full replacement of the original oil pump.

This is a replacement for the front handle of a chainsaw. A quality chainsaw handle is essential for those who are using these machines. They provide a place for the user to grip and to ensure they have a good hold of the chainsaw when it is in use. If the handle has an issue or has broken, it will need to be replaced before the owner uses the chainsaw again. It is not safe to operate the chainsaw if there is a problem with the handle.The handles are made from durable material, but there is still a potential for them to wear down or break over time or due to accidents. Replacing the chainsaw handle is relatively easy and should not take more than 15 to 20 minutes. Owners will want to be sure the chainsaw is cool and may want to remove the chain before getting started.The chainsaw front handle replacement will work for certain models of chainsaws from Husqvarna, Craftsman, and Poulan. The handle is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.

A clutch on a chainsaw is what enables the engine to turn a low RPM without the chain moving. It is a crucial component for operating the device safely. Without it, the blade or chain spins continually and leaves operators at risk for harm or injury. The clutch on any chainsaw works automatically and does not have a control or trigger to activate it. If your chainsaw is not automatically idling without halting the chain spinning, it could be time for a new clutch assembly. It requires only a screwdriver to do the repair This is a full replacement clutch assembly for chainsaws made by Husqvarna, Poulan, Craftsman, and several other brands. This OEM part is complete and features the clutch shoes and spring. It is an individual component and is not shipped with other hardware..

This is a rubber wheel ring that attaches to the wheel hub. Rubber wheel rings are also often called friction rings. The rubber wheel ring/friction ring meshes with the friction disc. This is what causes the drive wheel axle to turn. This is an integral part of the wheel movement.A new rubber wheel ring may be needed if the existing part is visibly damaged. The operator may also notice a grinding noise when the rubber wheel ring is starting to go bad. This may need to be replaced over time after normal wear and tear. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This rubber wheel ring is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This rubber wheel ring is compatible with snowblowers manufactured by Husqvarna, Poulan, and Jonsered.

Most saws cut with a blade, but a chainsaw lives up to its name and does all of the cutting using a chain fitted with links that feature individual blades. As is often the case with chainsaws, the chains can be worn out by a lot of cutting or by striking materials too hard for the chains to slice. It is dangerous to operate any chainsaw with a dull or worn chain. This replacement chain is designed for Husqvarna and Craftsman models. To replace it requires a wrench set and screwdriver. The chain will have to be properly adjusted for tension using the bevel gears, and it is important to follow manufacturer instructions when doing so. This is an OEM replacement part that ships individually and is sized for specific models. It arrives fully sharpened, so care must be used when installing it.

This piston ring is a genuine Husqvarna part, sold individually. This piston ring can be used as a replacement part in a chainsaw. The purpose of the piston ring in a chainsaw is to seal off the combustion chamber from possible fuel leakages as well as to ensure the proper transfer of heat from the piston into the cylinder.The piston ring might have to be replaced if it suffers from signs of clear damage. This damage could manifest in the form of white or gray smoke pluming from the exhaust, reduced fuel economy, reduced acceleration ability, and overall weakened performance of the appliance. If any of these symptoms occur and are attributable to damaged piston rings, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. The operator of the appliance should be aware that this component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This piston ring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.